

Ratgdo esp32c6-mini
- Size
- 38.8 × 27.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 30
- Nets
- 46
- Pads
- 153
- Tracks, vias
- 267, 27
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 6 Jun 2026
- Updated
- 10 Jun 2026
Overview
Ratgdo esp32c6-mini is an open-source printed circuit board by zznyjidi, from the zznyjidi/ratgdo-esp32c6-mini repository on GitHub. It is a 2-layer board of 38.8 × 27.5 mm with 30 parts on 46 nets, routed with 267 tracks and 27 vias.
It is built around the ESP32-C6-MINI-1, RS3236-3.3YF5 and USBLC6-2SC6, with the AO3400A among its other parts. Its parts include 14 resistors, 4 capacitors, 3 ICs, 3 connectors and 2 diodes. It belongs with the ESP32 and RISC-V boards of this library.
Main components
4ESP32-C6-MINI-1
SMD,13.2x16.6mmSMD,13.2x16.6mm New Arrivals ROHSEspressif SystemsUncategorisedRS3236-3.3YF5
SOT-23-5-40℃~+85℃@(Ta) 1 15uA 3.3V 500mA 550mV@(300mA) 7.5V 70dB@(1kHz) 80uVrms Fixed Over Current Protection、Over Temperature Protection、Enable Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJiangsu RUNIC TechVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)AO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
30| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistor_SMD:R_0402_1005Metric | R5, R7, R8, R11, R12, R13, R14 |
| 3 | 1K | Resistor_SMD:R_0402_1005Metric | R6, R9, R10 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C3, C4 |
| 2 | 22 | Resistor_SMD:R_0402_1005Metric | R3, R4 |
| 2 | 5.1K | Resistor_SMD:R_0402_1005Metric | R1, R2 |
| 1 | 0.01uF | Capacitor_SMD:C_0402_1005Metric | C2 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | Conn_01x02 | LCSC:CONN-SMD_2P-P2.54-XH2.54-WT | J2 |
| 1 | Conn_01x03 | LCSC:CONN-SMD_3P-P2.50_HX-2.54-3P-WT | J3 |
| 1 | ESP32-C6-MINI | PCM_Espressif:ESP32-C6-MINI-1 | U2 |
| 1 | PWR_LED | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | RS3236-3.3YF5 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | STAT_LED | LED_SMD:LED_0805_2012Metric | D2 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U1 |
| 1 | USB_C_2.0 | Connector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASV | J1 |
Similar boards
- 2 layers112 × 72 mm

- 4 layers34 × 15.2 mm

- 4 layers99 × 62 mm

- 4 layers38 × 74 mm

Stratosdrone
equationstratos/STRATOSDRONES
A 4-layer, 36×70 mm Tello-style portrait controller board for the STRATOSDRONE: chip-down ESP32-P4 (flight + camera + hardware H.264) with an ESP32-C6-MINI-1 Wi-Fi co-processor, IMU / barometer / ToF / optical-flow…
115 parts - 4 layers170.2 × 111.2 mm

E paper picture frame HW
JosefTAv/E-paper-picture-frame-HW
Hardware files for ESP32 based E-paper picture frame
110 partsMIT - 4 layers65 × 100 mm

Macropad
mcskny/wireless-he-macropad
A wireless, 12-key Hall-effect macropad built around a custom PCB, an ESP32-C6 sender, an ESP32-S3 USB receiver, and a native macOS companion app.
165 partsGPL-3.0 - 4 layers33.8 × 46 mm

- 4 layers

Questions
How big is the Ratgdo esp32c6-mini PCB?
It measures 38.8 × 27.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ratgdo esp32c6-mini use?
30 parts, built around the ESP32-C6-MINI-1, RS3236-3.3YF5, USBLC6-2SC6 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ratgdo esp32c6-mini KiCad files?
From the zznyjidi/ratgdo-esp32c6-mini repository on GitHub, at the commit this page was made from: the board is ratgdo-esp32c6-mini.kicad_pcb and its schematic ratgdo-esp32c6-mini.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ratgdo esp32c6-mini design in my own project?
Its repository states no licence, so its author keeps all rights: ask zznyjidi before reusing the design.