Skip to the content
2 layers35.7 × 59.5 mmPicoLEDs, the printed circuit board in 3D

Updates are occasionally posted on Instagram

Size
35.7 × 59.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
34
Nets
18
Pads
94
Tracks, vias
11, 4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Feb 2022
Updated
12 Aug 2026

Overview

PicoLEDs is an open-source printed circuit board by zygurt, from the zygurt/MIDI-Wind-Controller repository on GitHub, published under the MIT licence. It is a 2-layer board of 35.7 × 59.5 mm with 34 parts on 18 nets, routed with 11 tracks and 4 vias.

It is built around the 19-C47/RSGHBHC-5V01/2T. Its parts include 15 capacitors, 14 diodes, 3 connectors and 2 resistors.

Main components

1

README

README.md

MIDI-Wind-Controller

A brief overview of the repo

  • 3D designs contains dxf and svg files. Basic design was done in Fusion 360 and then exported.
  • Datasheets contains datasheets. Woah.
  • src contains source code for doppler and Arduino Leonardo implementations, as well as the board schematic. Currently midi messages are sent over USB, and shows the midi note number in binary on the LED grid on the doppler board.

Known issues

  • Pressing the low C key (D9) causes the doppler to crash. Reducing the length of the readButtons() switch case to 7 statements stops the crashing. The error isn't present on the Arduino Leonardo.
  • The octave keys give incorrect values for C#. Top 2 octaves are swapped. Again, this error does not occur for the Arduino Leonardo.

Updates are occasionally posted on Instagram

Current prototype status:

Prototype 2

Legacy information

Videos about the initial prototype can be found on Youtube

Parts

34
QtyValueFootprintReferences
150.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC0, C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11, C12, C13, C14
1419-C47/RSGHBHC-5V01/2TPicoSax:19-C47_RSGHBHC-5V01-2TD1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14
210KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
2Conn_01x01_PinConnector_Wire:SolderWirePad_1x01_SMD_1x2mmJ2, J3
1Conn_01x02Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ1

More from zygurt/MIDI-Wind-Controller

4
  • 2 layers100 × 160 mmPicoSax, the printed circuit board in 3D

    PicoSax

    zygurt/MIDI-Wind-Controller

    Updates are occasionally posted on Instagram

    89 parts1MIT
  • 2 layers100 × 160 mmPicoSax, the printed circuit board in 3D

    PicoSax

    zygurt/MIDI-Wind-Controller

    Updates are occasionally posted on Instagram

    82 parts1MIT
  • 2 layers100 × 160 mmPicoSax v2 NoLEDS, the printed circuit board in 3D

    PicoSax v2 NoLEDS

    zygurt/MIDI-Wind-Controller

    Updates are occasionally posted on Instagram

    38 parts1MIT
  • 2 layersPicoSax1, the printed circuit board in 3D

    PicoSax1

    zygurt/MIDI-Wind-Controller

    Updates are occasionally posted on Instagram

    36 parts1MIT

Similar boards

  • 10 layers130 × 90 mmMain pcb, the printed circuit board in 3D

    Main pcb

    azonenberg/dumptruck

    FPGA based dumper for flashes and more

    445 parts17BSD-3-Clause
  • 8 layers126 × 117 mmDemo board, the printed circuit board in 3D

    Demo board

    azonenberg/electronics-training

    Training materials for classes etc

    311 parts15
  • 4 layers13 × 50 mmPhone Charm 1.0, the printed circuit board in 3D

    Phone Charm 1.0

    Hhhh-Pain/Phone-Charm

    First PCB Creation

    41 partsMIT
  • 2 layers63.3 × 15 mmSs front panel, the printed circuit board in 3D

    Ss front panel

    loopj/short-stack

    World's Smallest Nintendo Wii, using a trimmed motherboard and custom stacked PCBs

    13 parts804
  • 2 layers66 × 93.5 mmChristmas tree, the printed circuit board in 3D

    Christmas tree

    azonenberg/misc-devboards

    Miscellaneous prototype hardware that wasn't major enough to warrant a dedicated repo

    65 parts17BSD-3-Clause
  • 2 layers26 × 30 mmMicrocontroller, the printed circuit board in 3D

    Microcontroller

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    34 parts1.1kCC-BY-4.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard old, the printed circuit board in 3D

    Amiga gfxcard old

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    34 parts1k

Questions

How big is the PicoLEDs PCB?

It measures 35.7 × 59.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PicoLEDs use?

34 parts, built around the 19-C47/RSGHBHC-5V01/2T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PicoLEDs KiCad files?

From the zygurt/MIDI-Wind-Controller repository on GitHub, at the commit this page was made from: the board is pcb/PicoLEDs/PicoLEDs.kicad_pcb and its schematic pcb/PicoLEDs/PicoLEDs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the PicoLEDs design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).