

Ferris sweep ec
An open, 34-key (3x5+2 per half) Topre electrocapacitive split keyboard using Ferris Sweep-style geometry and the known-built Tako Rev1 sensing architecture.
- Size
- 230.7 × 97.8 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 120
- Nets
- 70
- Pads
- 410
- Tracks, vias
- 586, 317
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 8 Aug 2026
- Updated
- 8 Aug 2026
Overview
Ferris sweep ec is an open-source printed circuit board by zwang695, from the zwang695/ferris-sweep-ec repository on GitHub. It is a 2-layer board of 230.7 × 97.8 mm with 120 parts on 70 nets, routed with 586 tracks and 317 vias.
It is built around the OPA350UA and 74HC4051. Its parts include 34 switches, 24 resistors, 6 capacitors, 6 ICs and 2 connectors.
Main components
2OPA350UA
SOIC-8-55℃~+150℃ 1 10pA 10pA 2.7V~5.5V 22V/us 38MHz 40mA 4uV/℃ 5.2mA 500uV 7nV/√Hz@10kHz 90dB Built-in compensation Rail-to-Rail Input, Rail-to-Rail Output SOIC-8 Operational Amplifier ROHSTexas InstrumentsPrecision Op Amps74HC4051
SOP-16-40℃~+85℃ 1 170MHz 28ns 29ns 3V~9V 5ns 5pF 80Ω 8:1 SOP-16 Analog Switches, Multiplexers ROHSWuxi I-core ElecAnalog Switches, Multiplexers
README
README.mdFerris Sweep EC
An open, 34-key (3x5+2 per half) Topre electrocapacitive split keyboard using
Ferris Sweep-style geometry and the known-built Tako Rev1 sensing architecture.
Tooling
KiCad 10.0.5 is installed through Flatpak. Use ./scripts/kicad-cli for
schematic ERC, PCB DRC, exports, and renders. QMK CLI 1.2.0 is also available;
firmware is kept reproducible in this repository rather than depending on the
machine's existing QMK checkout.
This repository is an engineering project. Files under production/ are not
released for fabrication until every check in docs/verification-plan.md has
passed and the release is explicitly tagged as a prototype.
Revision A goals
- Functional wired electrocapacitive keyboard.
- Separate, non-reversible left and right PCBs.
- 19.05 mm nominal key pitch with Sweep-style column stagger.
- 17 keys per half: three rows of five plus two thumb keys.
- Socketable Pro-Micro-pin-compatible RP2040 controller and local EC sensing front end on each half.
- QMK firmware with raw ADC diagnostics for post-assembly threshold tuning.
- USB-C on both halves for flashing and independent bring-up.
- Wired serial split transport.
- No RGB, display, encoder, wireless, or Vial in Revision A.
Repository layout
docs/— requirements, decisions, reference audit, and verification plan.hardware/— KiCad project and project-local libraries.mechanical/— layout coordinates, plate, and compression-stack files.firmware/— QMK keyboard implementation and keymaps.simulation/— analog-front-end models and ADC stimulus traces.tests/— schematic, PCB, firmware, and generated-output checks.references/— pinned upstream metadata; third-party files retain their original licenses and are not copied here until their provenance is clear.production/— generated Gerbers, drills, BOM, and placement files.
Status
Controller PCB, Topre plate, bottom plate, and upstream-QMK firmware now pass the automated pre-fabrication checks. The project remains a prototype: static checks and behavioral models cannot replace calibration with real domes, springs, housings, and fabricated sensor electrodes.
Run ./scripts/check-all for the complete automated gate. See
docs/tooling.md, docs/verification-status.md, docs/bom.md, and
docs/bring-up.md for setup, evidence, parts, and physical validation. The
Tako/Cipulot comparison is in docs/ec-cross-check.md.
For the wired JLCPCB fabrication and assembly package, run
./scripts/generate-jlcpcb and follow production/jlcpcb/README.md.
Parts
120| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | EC_SW | ferris_sweep_ec:ecs_pad_1U_no_ring | SW1, SW10, SW11, SW101, SW102, SW103, SW104, SW105, SW106, SW107, SW108, SW109, SW110, SW111, SW112, SW113 +14 |
| 28 | MountingHole | ferris_sweep_ec:MountingHole_3.4mm | H1, H10, H11, H101, H102, H103, H104, H105, H106, H107, H108, H109, H110, H111, H112, H113 +12 |
| 12 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R5, R6, R7, R8, R9, R10, R105, R106, R107, R108, R109, R110 |
| 8 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R101, R102, R103, R104 |
| 6 | MountingHole | ferris_sweep_ec:M2_hole_3.5mm | H15, H16, H17, H115, H116, H117 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C3, C101, C103 |
| 4 | EC_SW | ferris_sweep_ec:ecs_pad_1U_no_ring_90deg | SW16, SW17, SW116, SW117 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R11, R111 |
| 2 | 220p | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C102 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R12, R112 |
| 2 | 74HC4051 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U2, U102 |
| 2 | Ext_Res | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | JP1, JP101 |
| 2 | MJ-4PP-9 | ferris_sweep_ec:TRRS-PJ-320A | J1, J101 |
| 2 | MountingHole_Pad | ferris_sweep_ec:bat_pin+ | BAT_HOLE+1, BAT_HOLE+101 |
| 2 | MountingHole_Pad | ferris_sweep_ec:bat_pin- | BAT_HOLE-1, BAT_HOLE-101 |
| 2 | OPA350 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3, U103 |
| 2 | Reset | Button_Switch_SMD:Panasonic_EVQPUL_EVQPUC | RSW1, RSW101 |
| 2 | STeMCell | ferris_sweep_ec:ArduinoProMicro | U1, U101 |
| 2 | SW_SPDT | ferris_sweep_ec:SW_SPDT_SMD_PCM12 | PSW1, PSW101 |
| 2 | VAL** | ferris_sweep_ec:mouse-bite-5mm-slot-with-space-for-track | mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 2 | nice!view | ferris_sweep_ec:nice_view | DISP1, DISP101 |
Similar boards
- 4 layers230.7 × 97.8 mm

- 4 layers208.3 × 75.8 mm

- 4 layers285 × 94.6 mm

- 2 layers133.8 × 110.4 mm

- 2 layers406.4 × 158.6 mm

- 4 layers284.7 × 100 mm

EC Pro2 Mainboard
4pplet/EC-Pro-2
Open source replacement PCB kit for the HHKB Pro 2 keyboard.
138 parts3MIT - 2 layers353 × 151 mm

RF R1 8-9Xu
4pplet/RF_R1_8-9Xu
Open source universal PCB for the Realforce R1 family of keyboards.
215 parts2MIT - 4 layers242.9 × 95.3 mm

The nicholas van prototype
calvin-mcd/the-nicholas-van
EC (topre) PCB for trashman's vanagon
141 parts2
Questions
How big is the Ferris sweep ec PCB?
It measures 230.7 × 97.8 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ferris sweep ec use?
120 parts, built around the OPA350UA and 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ferris sweep ec KiCad files?
From the zwang695/ferris-sweep-ec repository on GitHub, at the commit this page was made from: the board is hardware/rev-a/ferris-sweep-ec.kicad_pcb and its schematic hardware/rev-a/ferris-sweep-ec.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ferris sweep ec design in my own project?
Its repository states no licence, so its author keeps all rights: ask zwang695 before reusing the design.