Skip to the content
2 layers353 × 151 mmRF R1 8-9Xu, the printed circuit board in 3D

Open source universal PCB for the Realforce R1 family of keyboards.

Size
353 × 151 mm
Copper layers
2
Thickness
1.6 mm
Parts
215
Nets
75
Pads
705
Tracks, vias
1,108, 970
Pours
4
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Dec 2022
Updated
13 Dec 2022

Overview

RF R1 8-9Xu is an open-source printed circuit board by 4pplet, from the 4pplet/RF_R1_8-9Xu repository on GitHub, published under the MIT licence. It is a 2-layer board of 353 × 151 mm with 215 parts on 75 nets, routed with 1,108 tracks and 970 vias.

It is built around the SN74AHCT1G125DBV, OPA350UA and 74HC4051, with the ME6206A33M3G and PRTR5V0U2X among its other parts. Its parts include 100 switches, 33 resistors, 15 capacitors, 6 ICs and 4 diodes. It belongs with the keyboards and input and radio and wireless boards and the STM32 boards of this library.

Main components

5

README

README.md

RF_R1_8-9Xu

Open source universal PCB for the Realforce R1 family of keyboards.

Introduction

This project is a continuation of my development of open source EC boards.

The supported layouts are the one of the Realforce R1 family of keyboards, it being ANSI, ISO or JIS.

Technical information

  • Layout size: tenkeykess (TKL)
  • Compatible switches: EC switches (Topre and NIZ)
  • Microcontroller: STM32F401
  • Connector:
    • internal USB-C
    • original JST connector S4B-EH(LF)(SN)
    • jst connector for daughterboard
  • Addressable RGB strip support
  • Firmware compatibility: QMK (with VIA/VIAL support)
  • Protection hardware (on all connection methods):
    • Fused
    • ESD protection

Renders and Prototypes

Render

PCB Front Render

PCB Back Render

Prototype

PCB Front Proto

PCB Back Proto

Revisions and relative features

Rev1

This revision implements all the main features of the PCB.

Connectivity

Connectivity

Since this is first and foremost a replacement PCB for the original Realforce R1 PCB, the original JST connector is still supported. It's been moved to the right to accommodate the new JST connector for the daughterboard and the USB-C connector.

I thought about adding extra connectors so that if anyone wants to use this PCB in a custom project they can have the flexibility to use the connector that they prefer.

Addressable RGB strip support

Connectivity

Since the R1 PCB is used in some already existing custom PC (polycarbonate) cases, it was important to have a way to include a RGB strip support.

The strip can be directly sticked to the PCB and then wired to the PCB by soldering the pins to the THT pins or SMD pads.

Lighting can be controlled by the board itself and customization is achieved by using Vial/VIA.

Rev 1.1

This revision implements the following changes:

  • added support for THT LED for Caps Lock and Scroll Lock
  • moved filtering components for plate shield to top side
  • added filtering components for USB-C shield
  • improved ground stitching

PCB Front Render Rev 1.1

"Why no plates?" I hear you say

It is what it is.

walky

For real though, the PCB is a replacement for the original Realforce R1 PCB so using the original plates is the preferred option. Furthermore, the multilayout support makes it tedious to make a plate design for each and every layout.

Nevertheless, if there's a particular plate config you want to use, you can always open an issue on the repository or even better make a PR from your own fork.

Copyright notice

This project is released under the MIT License. For the license, please refer to the LICENSE.md file.

Parts

215
QtyValueFootprintReferences
83EC_SWcipulot_parts:ecs_pad_no_ringSW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW100 +67
44MountingHolecipulot_parts:HOLE_M2_RFH2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24 +28
17100kResistor_SMD:R_0402_1005MetricR13, R14, R15, R16, R17, R18, R19, R20, R23, R24, R25, R26, R27, R28, R29, R30 +1
8100Resistor_SMD:R_0402_1005MetricR3, R4, R6, R7, R8, R9, R31, R32
8100nCapacitor_SMD:C_0402_1005MetricC5, C6, C7, C8, C9, C11, C13, C14
41Ucipulot_parts:ecs_pad_no_ringSW31, SW33, SW71, SW82
310kResistor_SMD:R_0402_1005MetricR10, R11, R12
31uCapacitor_SMD:C_0402_1005MetricC3, C4, C10
3LEDLED_THT:LED_D3.0mmD2, D3, D4
3LOGOLOGOG***, G***, G***
2100nCapacitor_SMD:C_0603_1608MetricC1, C15
25.1kResistor_SMD:R_0402_1005MetricR1, R2
274HC4051cipulot_parts:TSSOP16U4, U6
2ANSI_Entercipulot_parts:ecs_pad_no_ringSW51, SW68
2EC_SWcipulot_parts:ecs_pad_no_ring_stepped&normal_cutSW90, SW93
11.25Ucipulot_parts:ecs_pad_no_ringSW69
11.75Ucipulot_parts:ecs_pad_no_ringSW84
1100kResistor_SMD:R_0603_1608MetricR21
11kResistor_SMD:R_0603_1608MetricR22
12.25Ucipulot_parts:ecs_pad_no_ringSW70
12.75Ucipulot_parts:ecs_pad_no_ringSW83
1220 @ 100MHz, 2AInductor_SMD:L_0603_1608MetricL1
1220pCapacitor_SMD:C_0603_1608MetricC12
12Ucipulot_parts:ecs_pad_no_ringSW32
1330Resistor_SMD:R_0603_1608MetricR33
14.7uCapacitor_SMD:C_0402_1005MetricC2
1500mAFuse:Fuse_1206_3216MetricF1
18 MHzCrystal:Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mmY1
1ANSI_\cipulot_parts:ecs_pad_no_ringSW50
1BOOT0Connector_PinHeader_1.27mm:PinHeader_1x02_P1.27mm_VerticalSW1
1Conn_01x03cipulot_parts:LED_Strip_PadJ4
1Conn_01x03Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_VerticalJ3
1EC_SWcipulot_parts:ecs_pad_no_ring_stepped&normalSW55
1Ext_ResResistor_SMD:R_0603_1608MetricJP1
1HRO-TYPE-C-31-M-12cipulot_parts:HRO-TYPE-C-31-M-12-AssemblyUSB1
1ISO_|cipulot_parts:ecs_pad_no_ringSW67
1JSTConnector_JST:JST_EH_S4B-EH_1x04_P2.50mm_HorizontalJ1
1JSTcipulot_parts:JST-SR-4J2
1ME6206A33M3GPackage_TO_SOT_SMD:SOT-23U3
1MountingHole_Padcipulot_parts:M2.5_RF_ShieldH1
1OPA350Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU5
1PRTR5V0U2XPackage_TO_SOT_SMD:SOT-143D1
1SN74AHCT1G125Package_TO_SOT_SMD:SOT-23-5U2
1STM32F401CBUxPackage_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mmU1

Similar boards

  • 4 layers284.7 × 100 mmEC Pro2 Mainboard, the printed circuit board in 3D

    EC Pro2 Mainboard

    4pplet/EC-Pro-2

    Open source replacement PCB kit for the HHKB Pro 2 keyboard.

    138 parts3MIT
  • 2 layers77.1 × 137.6 mmEC23U, the printed circuit board in 3D

    EC23U

    davek184/EC23U

    Open source numpad Electrostatic Capacitive PCB.

    84 parts1MIT
  • 4 layers230.7 × 97.8 mmTako, the printed circuit board in 3D

    Tako

    ssbb/tako

    34 key EC split keyboard

    146 parts200MIT
  • 4 layers208.3 × 75.8 mmTravaulta WKL, the printed circuit board in 3D

    Travaulta WKL

    calvin-mcd/travaulta

    topre pcb for the vault35

    108 parts16
  • 4 layers285 × 94.6 mmEC60, the printed circuit board in 3D

    EC60

    4pplet/EC60

    Open source universal 60% Electrostatic Capacitive PCB.

    157 parts9MIT
  • 2 layers406.4 × 158.6 mmCDS, the printed circuit board in 3D

    CDS

    Cipulot/CDS

    Replacement PCB for the CDS Technology keyboard (CDS-G5CSKB, Topre HiPro).

    223 parts4
  • 4 layers242.9 × 76.2 mmToprevan prototype, the printed circuit board in 3D

    Toprevan prototype

    calvin-mcd/toprevan

    EC pcb for minivan keyboards

    122 parts1

Questions

How big is the RF R1 8-9Xu PCB?

It measures 353 × 151 mm and has 2 copper layers, 1.6 mm thick.

What parts does the RF R1 8-9Xu use?

215 parts, built around the SN74AHCT1G125DBV, OPA350UA, 74HC4051 and ME6206A33M3G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the RF R1 8-9Xu KiCad files?

From the 4pplet/RF_R1_8-9Xu repository on GitHub, at the commit this page was made from: the board is PCB/RF_R1_8-9Xu.kicad_pcb and its schematic PCB/RF_R1_8-9Xu.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the RF R1 8-9Xu design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).