2 layers183 × 128.7 mm
2 layers47.6 × 220.4 mm
Module
zlosynth/proton7Playground module for eurorack prototyping.
- Size
- 47.6 × 220.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 124
- Nets
- 138
- Pads
- 478
- Tracks, vias
- 1,297, 134
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Feb 2022
- Updated
- 6 Nov 2023
Overview
Module is an open-source printed circuit board by zlosynth, from the zlosynth/proton repository on GitHub. It is a 2-layer board of 47.6 × 220.4 mm with 124 parts on 138 nets, routed with 1,297 tracks and 134 vias.
It is built around the MCP6002-I/P, MCP6004-E/P and LM4040C10ILP, with the BAT54S among its other parts. Its parts include 62 resistors, 23 connectors, 20 capacitors, 6 ICs and 3 diodes. It belongs with the audio and music boards and the STM32 boards of this library.
Main components
4
MCP6002-I/P
PDIP-8-40℃~+85℃ 1.8V~6V 100uA 1MHz 1pA 1pA 2 23mA 28nV/√Hz@1kHz 2uV/℃ 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-8 Operational Amplifier ROHSMicrochip TechnologyOperational Amplifier
MCP6004-E/P
PDIP-14-40℃~+125℃ 1.8V~6V 100uA 1MHz 1pA 1pA 23mA 28nV/√Hz@1kHz 2uV/℃ 4 4.5mV 600V/ms 76dB ESD protection Rail-to-Rail Input, Rail-to-Rail Output PDIP-14 Operational Amplifier ROHSMicrochip TechnologyOperational AmplifierLM4040C10ILP
TO-92-3-40℃~+85℃@(Ta) 100ppm/℃ 10V 15mA Fixed Parallel ±0.5% TO-92-3 Voltage Reference ROHSTexas InstrumentsVoltage Reference
BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes
README
README.mdProton
Playground module for eurorack prototyping.
- This is meant to help to test ideas of new modules before they get their own custom hardware.
- This is not meant to be stable or simple.
Development
See DEVELOPMENT.md to find some basic commands to interact with the project.
License
Software of Proton is distributed under the terms of the General Public License version 3. See LICENSE-SOFTWARE for details.
Schematics and PCB layout are distributed under the terms of Creative Commons BY-SA. See LICENSE-HARDWARE for details. Parts of the schematics are based on Emilie Gillet's Mutable Instruments and Electrosmith's Patch kudos to them for making them open.
Changelog
Read the CHANGELOG.md to learn about changes introduced in each release.
Versioning
See VERSIONING.md to find detailed information about versioning of the project and compatability between its software and hardware.
Parts
124| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | Jack | Connector_Audio:Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles | J1, J4, J5, J6, J7, J8, J9, J10, J11, J12, J15, J16, J18, J19 |
| 12 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R9, R10, R11, R14, R28, R29, R49, R51, R53, R60, R62 |
| 12 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R8, R22, R23, R24, R25, R54, R55, R56, R64, R65 |
| 9 | 47k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R36, R37, R38, R39, R42, R43, R44 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R18, R19, R34, R35, R40, R41, R63, R66 |
| 7 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6, C7, C8, C9, C10, C11, C21 |
| 7 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R45, R46, R47, R57, R58 |
| 7 | 200k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R16, R17, R48, R50, R52, R59, R61 |
| 7 | 3n3 | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12, C13, C14, C15, C16, C17, C18 |
| 4 | 18p | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C3, C4, C5 |
| 4 | 6k8 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13, R30, R31 |
| 3 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R15, R20, R32 |
| 3 | TL074 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1, U2, U3 |
| 3 | VAL** | Panelization:mouse-bite-2mm-slot | mouse-bite-2mm-slot, mouse-bite-2mm-slot, mouse-bite-2mm-slot |
| 2 | 10u | Capacitor_SMD:CP_Elec_6.3x5.8 | C19, C20 |
| 2 | FB | Inductor_SMD:L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | FB1, FB2 |
| 2 | Schottky | Diode_SMD:D_SOD-123 | D3, D4 |
| 1 | BAT54S | Package_TO_SOT_SMD:SOT-23_Handsoldering | D2 |
| 1 | Daisy Seed v4 | Device_Audio_Electrosmith_Daisy_Seed:Device_Audio_Electrosmith_Daisy_Seed | A1 |
| 1 | Encoder | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | LM4040C10 | Package_TO_SOT_SMD:SOT-23_Handsoldering | U7 |
| 1 | LOGO | Custom:outline | G*** |
| 1 | MCP6002 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | MCP6004 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U4 |
| 1 | Micro_SD | Custom:microsd_connector | J13 |
| 1 | NE_A | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J23 |
| 1 | NE_B | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J3 |
| 1 | NW_A | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J21 |
| 1 | NW_B | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J14 |
| 1 | OLED | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | Pot | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | Power | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | J17 |
| 1 | SW_A | Connector_PinHeader_2.54mm:PinHeader_2x06_P2.54mm_Vertical | J22 |
| 1 | SW_B | Connector_PinSocket_2.54mm:PinSocket_2x06_P2.54mm_Vertical | J20 |
The 123 most common of 124 parts.
Questions
How big is the Module PCB?
It measures 47.6 × 220.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Module use?
124 parts, built around the MCP6002-I/P, MCP6004-E/P, LM4040C10ILP and BAT54S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Module KiCad files?
From the zlosynth/proton repository on GitHub, at the commit this page was made from: the board is hardware/Module.kicad_pcb and its schematic hardware/Module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Module design in my own project?
Its repository states no licence, so its author keeps all rights: ask zlosynth before reusing the design.
Similar boards
- 2 layers59.1 × 106.7 mm
- 4 layers65 × 128.3 mm
- 2 layers69.2 × 106.7 mm
- 2 layers153.6 × 153.9 mm
- 2 layers90 × 67 mm
- 4 layers70.8 × 100 mm
Kishoof Components
dchwebb/Kishoof
Eurorack Wavetable Synthesizer; Dual channel; 64MB internal storage accessed via USB
98 parts17 - 2 layers90 × 110 mm
