2 layers330.5 × 115.6 mm
2 layers180.3 × 134.6 mm
Split keyboard
zinziroge/split_keyboardsplit_keyboard
- Size
- 180.3 × 134.6 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 75
- Pads
- 329
- Tracks, vias
- 684, 117
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Nov 2020
- Updated
- 28 Nov 2021
Overview
Split keyboard is an open-source printed circuit board by zinziroge, from the zinziroge/split_keyboard repository on GitHub, published under the MIT licence. It is a 2-layer board of 180.3 × 134.6 mm with 86 parts on 75 nets, routed with 684 tracks and 117 vias.
Its parts include 36 diodes, 36 switches, 4 resistors, 3 connectors and 1 capacitor. It belongs with the keyboards and input boards and the ESP32 boards of this library.
README
README.mdsplit_keyboard
split_keyboard.
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 |
| 36 | SW_PUSH | kbd:CherryMX_1u | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +20 |
| 5 | Val** | kbd:HOLE | Ref**, Ref**, Ref**, Ref**, Ref** |
| 4 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1, R2, R3, R4 |
| 2 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2, J3 |
| 1 | CP | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | Conn_02x08_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Horizontal | J1 |
| 1 | ESP32-DEVKITC-32D | ESP32-DEVKITC-32D:MODULE_ESP32-DEVKITC-32D | U1 |
Questions
How big is the Split keyboard PCB?
It measures 180.3 × 134.6 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Split keyboard use?
86 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Split keyboard KiCad files?
From the zinziroge/split_keyboard repository on GitHub, at the commit this page was made from: the board is kicad/split_keyboard/split_keyboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Split keyboard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
More from zinziroge/split_keyboard
4- 2 layers
- 2 layers188.1 × 133.4 mm
- 2 layers139.1 × 115.6 mm
Similar boards
- 2 layers162.2 × 126.5 mm
- 2 layers75 × 40 mm
Pulse shaping extension v1.1
MKesenheimer/fault-injection-library
Python library to perform fault-injection attacks on microcontrollers
86 parts218GPL-3.0 - 2 layers52 × 90 mm
- 2 layers66 × 54 mm
- 2 layers55.8 × 66.5 mm
Tadpoleswadge
cnlohr/cnhardware
My dumping grounds for all my kicad projects and random hardware bringup.
86 parts114 - 2 layers58 × 109 mm
Minion
AudioMorphology/Europi
Opensource sequencer software for Raspberry Pi equipped with Eurorack-compatible hardware
86 parts103 - 2 layers266 × 89.6 mm
- 2 layers149.9 × 99.9 mm
