

Cpu backplane
Retro-Computer Designs (Z80, 65C816, etc)
- Size
- 149.9 × 99.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 86
- Nets
- 107
- Pads
- 660
- Tracks, vias
- 3,284, 193
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 23 Jan 2017
- Updated
- 23 Jun 2026
Overview
Cpu backplane is an open-source printed circuit board by douggilliland, from the douggilliland/Retro-Computers repository on GitHub. It is a 2-layer board of 149.9 × 99.9 mm with 86 parts on 107 nets, routed with 3,284 tracks and 193 vias.
It is built around the DS1813-10+, 74AC161PC and HM62256BLP-7. Its parts include 23 resistors, 18 capacitors, 12 diodes, 9 ICs and 4 connectors. It belongs with the retro computing and games boards and the FPGA and CPLD boards of this library.
Main components
3DS1813-10+
TO-92-3-40℃~+85℃@(Ta) 1 1.2V~5.5V 150ms 4.35V Active Low No Open Drain Voltage Monitor Yes TO-92-3 Supervisor and Reset ICs ROHSMaxim Integrated (Analog Devices)Supervisor And Reset ICs74AC161PC
PDIP-16-40℃~+85℃ 1 167MHz 2V~6V 4 5ns@5V,50pF 74AC Asynchronous Divide-by-2 Reset function、Cascade counter、Synchronous counting Rising Edge Synchronous Up Counter PDIP-16 Counters, Dividers ROHSonsemiCounters, DividersHM62256BLP-7
DIP28DIP28 New Arrivals ROHSHITUncategorised
README
6502/planck-6502/Hardware/opl2_board/README.mdPlanck 6502 sound card
This is a sound card based on the YM3892 OPL2 sound chip.


This documentation is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Parts
86| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C2, C4, C5, C9, C12, C14, C15, C16, C17, C18 |
| 10 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R14, R17, R18, R21, R22 |
| 8 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R8, R15, R23, R24, R25, R26, R27 |
| 7 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D2, D3, D4, D5, D6, D7, D8 |
| 7 | 1u | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C1, C3, C6, C7, C8, C10, C11 |
| 6 | Conn_02x25 | Connector_PinSocket_2.54mm:PinSocket_2x25_P2.54mm_Vertical | SLOT0, SLOT1, SLOT2, SLOT3, SLOT4, SLOT5 |
| 5 | 330R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R9, R10, R11, R12, R13 |
| 5 | LED | LED_THT:LED_D3.0mm | D1, LED1, LED2, LED3, LED4 |
| 5 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad | H1, H2, H3, H5, H6 |
| 2 | DS1813-10+ | Package_TO_SOT_THT:TO-92L_Inline | IC1, IC2 |
| 2 | LOGO | Logo:logo-sm | G***, G*** |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | NMI1, RESET1 |
| 1 | 1.8432MHz | Oscillator:Oscillator_DIP-8 | X3 |
| 1 | 24MHz | Oscillator:Oscillator_DIP-8 | X1 |
| 1 | 28C256 | Package_DIP:DIP-28_W15.24mm_Socket | U8 |
| 1 | 47u | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C13 |
| 1 | 74AC161 | Package_DIP:DIP-16_W7.62mm_Socket | U1 |
| 1 | Conn_01x06 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x14 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J4 |
| 1 | Conn_02x02_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J2 |
| 1 | GAL16V8 | Package_DIP:DIP-20_W7.62mm_Socket | U5 |
| 1 | HM62256BLP | Package_DIP:DIP-28_W7.62mm_Socket | U7 |
| 1 | PAL24 | Package_DIP:DIP-24_W7.62mm_Socket | U4 |
| 1 | SW_SPST | Button_Switch_THT:SW_E-Switch_EG1271_DPDT | SW1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Molex-105017-0001 | J1 |
| 1 | W65C02SxP | Package_DIP:DIP-40_W15.24mm_Socket | U6 |
| 1 | W65C51NxP | Package_DIP:DIP-28_W15.24mm_Socket | U9 |
The 84 most common of 86 parts.
More from douggilliland/Retro-Computers
12- 2 layers80.8 × 60.1 mm

- 2 layers281 × 108.3 mm

- 2 layers254 × 134.6 mm
.kicad_pcb.jpg?size=s&soon)
FPGA Z80 (no traces)
douggilliland/Retro-Computers
Retro-Computer Designs (Z80, 65C816, etc)
155 parts87 - 2 layers99.9 × 99.9 mm

- 2 layers99.1 × 99.7 mm

- 2 layers80.8 × 60.1 mm

- 2 layers100 × 100 mm

- 2 layers80.8 × 60.1 mm

- 2 layers80.8 × 60.1 mm

- 2 layers80.8 × 60.1 mm

- 2 layers80.8 × 60.1 mm

- 2 layers

Similar boards
- 2 layers100 × 100 mm

- 2 layers149.9 × 99.9 mm

Planck-6502
jfoucher/planck-6502
This is a mirror of https://gitlab.com/planck-6502/planck-6502
91 parts2 - 6 layers160 × 100 mm

- 2 layers233.4 × 280 mm

- 2 layers160 × 100 mm

- 4 layers406.4 × 254 mm

- 2 layers99.1 × 49.9 mm

- 2 layers99.1 × 99.1 mm

BE6502 SBC
tebl/BE6502-Build-a-65c02-computer
A PCB being made while watching Ben Eaters "Build a 6502 computer" video series. Includes the computer itself, a standalone slow clock and an Arduino Mega shield for the bus monitor sketch..
61 parts129
Questions
How big is the Cpu backplane PCB?
It measures 149.9 × 99.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Cpu backplane use?
86 parts, built around the DS1813-10+, 74AC161PC and HM62256BLP-7. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Cpu backplane KiCad files?
From the douggilliland/Retro-Computers repository on GitHub, at the commit this page was made from: the board is 6502/planck-6502/Hardware/cpu_backplane/cpu_backplane.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Cpu backplane design in my own project?
Its repository states no licence, so its author keeps all rights: ask douggilliland before reusing the design.