

Standalone
Microforce Analog to Preston Serial converter
- Size
- 78 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 53
- Nets
- 85
- Pads
- 248
- Tracks, vias
- 531, 52
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 May 2024
- Updated
- 14 Oct 2025
Overview
Standalone is an open-source printed circuit board by zibredlektab, from the zibredlektab/MFSerial repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 78 × 60 mm with 53 parts on 85 nets, routed with 531 tracks and 52 vias.
It is built around the MAX3323EEPE+, ADR02AUJZ-REEL7 and BD433M5FP-CE2. Its parts include 13 connectors, 12 capacitors, 8 resistors, 4 ICs and 4 diodes. It belongs with the SAM D and SAM boards of this library.
Main components
3MAX3323EEPE+
PDIP-16-40℃~+85℃ 1 1 250Kbps 3V~5.5V Transceiver PDIP-16 RS232 ICs ROHSMaxim Integrated (Analog Devices)RS232 ICsADR02AUJZ-REEL7
TSOT-23-5-40℃~+125℃@(Ta) 10mA 10uVp-p 1mA 25ppm/℃ 5V 7V~36V Fixed Series ±0.1% TSOT-23-5 Voltage Reference ROHSAnalog DevicesVoltage ReferenceBD433M5FP-CE2
TO-252-40℃~+150℃@(Tj) 1 3.3V 38uA 42V 500mA 60dB@(120Hz) 750mV@(300mA) Fixed Over Current Protection、Thermal Shutdown Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSROHM SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdMFSerial
Microforce Analog to Preston Serial converter
Parts
53| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C1, C2, C3, C5 |
| 3 | PinSocket_1x01_P2.54mm_Vertical | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | VIN, VUSB, ZSIG |
| 3 | Serial2 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J7, J11, J12 |
| 2 | 10uF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C9, C11 |
| 2 | 1uF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C10, C12 |
| 2 | 22pF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C6, C7 |
| 2 | 5K1 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1, R2 |
| 2 | 65 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R8 |
| 2 | D_Schottky | Diode_SMD:D_1812_4532Metric_Pad1.30x3.40mm_HandSolder | D1, D2 |
| 2 | LED | LED_THT:LED_D5.0mm | D3, D4 |
| 2 | ~ | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J9, J10 |
| 1 | |||
| 1 | 0.33uF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C4 |
| 1 | 1pF | Capacitor_SMD:C_1812_4532Metric_Pad1.57x3.40mm_HandSolder | C8 |
| 1 | 32.768, 12.5pF | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y1 |
| 1 | 3K3 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 4K7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 5.1K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R6 |
| 1 | 530480410 | 530480410:CON_530480410_MOL | J2 |
| 1 | 530480510 | 530480510:CON_530480510_MOL | J1 |
| 1 | 680K | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
| 1 | ADR02AUJZ-REEL7 | Package_TO_SOT_SMD:TSOT-23-5_HandSoldering | U2 |
| 1 | ATSAMD21G18A-AUT | digikey-footprints:TQFP-48_7x7mm | U3 |
| 1 | Analog | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J5 |
| 1 | Analog2 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J8 |
| 1 | BD433M5FP-CE2 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | FH34SRJ-16S-0.5SH_50_ | FH34SRJ_16S_0_5SH_50:HRS_FH34SRJ-16S-0.5SH_50_ | J13 |
| 1 | MAX3323EEPE+ | MAX3323EEPE+:DIP794W56P254L1918H457Q16N | IC1 |
| 1 | Program | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J6 |
| 1 | RESET | PVA1EEH21.2NV2:PVA1EEH212NV2 | S1 |
| 1 | SET | PVA1EEH21.2NV2:PVA1EEH212NV2 | S2 |
| 1 | SOFT | PVA1EEH21.2NV2:PVA1EEH212NV2 | S3 |
| 1 | Serial | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J4 |
| 1 | USB4085-GF-A_REVB | USB4085_GF_A:CONN16_USB4085-GF-A_GCT | J3 |
| 1 | ZERO | PVA1EEH21.2NV2:PVA1EEH212NV2 | S4 |
The 50 most common of 53 parts.
More from zibredlektab/MFSerial
6- 2 layers35 × 31.3 mm

- 2 layers35 × 31.3 mm

- 2 layers35 × 31.3 mm

- 2 layers38.5 × 37 mm

- 2 layers69.9 × 47.8 mm

- 2 layers24.6 × 10.8 mm

Similar boards
- 2 layers150 × 100 mm

Rps01
Kenkneeshio/SeniorDesign-Team9
This is SDSU's Spring 2023 Senior Design A Team 9: Robot Power System GitHub
182 parts - 2 layers62 × 92 mm

ElectronicsPCB
CUSail-Navigation/PCB-FA25-SP26
This is a repository containing the PCBs designed during the FA25-SP26 academic year. Due to high compatibility and relative ease of use, all of these files are made with KiCad.
54 parts - 2 layers157 × 58 mm

- 4 layers80 × 55 mm

ESC
Andresse2020/NovaDrone-Hardware
Complete electronic system design for a high-performance quadcopter drone, developed entirely from scratch. Includes power distribution, motor control, flight stabilization, sensor integration, and communication…
141 parts3 - 2 layers217.1 × 393.8 mm

Sweepv2
davidphilipbarr/Sweep
Sweep - a small promicro based keyboard inspired by the Ferris.
53 parts2.1k - 2 layers121.9 × 81.3 mm

Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
53 parts1kGPL-3.0 - 2 layers48 × 48 mm

- 2 layers103.7 × 74.1 mm

PicoGUS
polpo/picogus
Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support
53 parts805
Questions
How big is the Standalone PCB?
It measures 78 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Standalone use?
53 parts, built around the MAX3323EEPE+, ADR02AUJZ-REEL7 and BD433M5FP-CE2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Standalone KiCad files?
From the zibredlektab/MFSerial repository on GitHub, at the commit this page was made from: the board is Standalone/Standalone.kicad_pcb and its schematic MFSerial Proto/MFSerial Proto.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Standalone design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).