2 layers50 × 64 mm
I2current
cr1tbit/i2current
The Raison d'être of this board is to be a powerful, extensible, and affordable replacement for hotglueing a random powerbank into your next portable small-scale electronic project.
158 parts2
2 layers49.1 × 32 mm
Bedside phone control
zevv/phonectl- Size
- 49.1 × 32 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 28
- Nets
- 51
- Pads
- 178
- Tracks, vias
- 359, 32
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 4 Mar 2024
- Updated
- 23 Mar 2024
Overview
Bedside phone control is an open-source printed circuit board by zevv, from the zevv/phonectl repository on GitHub. It is a 2-layer board of 49.1 × 32 mm with 28 parts on 51 nets, routed with 359 tracks and 32 vias.
It is built around the ATMEGA328P-AU and FUSB302B01MPX. Its parts include 9 resistors, 7 capacitors, 4 ICs, 4 connectors and 2 switches. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATMEGA328P-AU
TQFP-32(7x7)-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH TQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
FUSB302B01MPX
MLP-14(2.5x2.5)-40℃~+85℃ 25uA 3.3V、5V 560mA Controller USB 3.1 MLP-14(2.5x2.5) USB Converters ROHSonsemiUSB Converters
Parts
28| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 1u | Capacitor_SMD:C_0603_1608Metric | C5, C6, C7 |
| 3 | 5k1 | Resistor_SMD:R_0603_1608Metric | R4, R6, R7 |
| 2 | 36k | Resistor_SMD:R_0603_1608Metric | R5, R8 |
| 2 | 68R | Resistor_SMD:R_0603_1608Metric | R1, R2 |
| 2 | C | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | USB_C_Receptacle_USB2.0_16P | Connector_USB:USB_C_Receptacle_Molex_105450-0101 | J1, J3 |
| 1 | 100n | Capacitor_SMD:C_0603_1608Metric | C3 |
| 1 | 16MHz | Crystal:Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 330R | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C4 |
| 1 | ATmega328P-A | Package_QFP:TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J4 |
| 1 | EC12E2 424407 | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |
| 1 | FUSB302B01MPX | Package_DFN_QFN:WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U4 |
| 1 | LED | LED_THT:LED_D3.0mm | D1 |
| 1 | MCP1703Ax-330xxDB | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U2 |
| 1 | MIC2026-1xM | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
Questions
How big is the Bedside phone control PCB?
It measures 49.1 × 32 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bedside phone control use?
28 parts, built around the ATMEGA328P-AU and FUSB302B01MPX. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bedside phone control KiCad files?
From the zevv/phonectl repository on GitHub, at the commit this page was made from: the board is pcb/bedside-phone-control.kicad_pcb and its schematic pcb/bedside-phone-control.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bedside phone control design in my own project?
Its repository states no licence, so its author keeps all rights: ask zevv before reusing the design.
Similar boards
- 2 layers110 × 89 mm
- 2 layers23.5 × 40.5 mm
Usb c power delivery
bharat-ops77/USB-C-Power-Delivery-Circuit
This is a USB-C power delivery trigger board...can be used to power benchtop (low current circuits) ....controlled by an Arduino or similar Microcontroller.
15 parts1GPL-3.0 - 6 layers170 × 170 mm
- 4 layers74 × 46 mm
PD Charger
electricalhog/PD_Charger
Wide swing DC input to USB-PD source capable of USBPD1.2 and EPR up to 240W.
134 parts - 4 layers80 × 105 mm
- 4 layers101.3 × 63.5 mm
Swyter psdaptwor psvr2-pc
punkfab/pcb-corpus
235 real KiCad boards from open-source hardware repositories, prepared as a placement and routing benchmark
135 parts1 - 2 layers80 × 110 mm
NucDeck Left Controller PCB
dmcke5/NucDeck
The Open Source DIY Handheld Gaming PC!
59 parts561CERN-OHL-S-2.0