2 layers35.6 × 30.5 mm
2 layers19.3 × 20 mm
Attinyx5 programming
ZeroPhone/ZeroPhone-Mod-PCBs12ZeroPhone mod board PCB files
- Size
- 19.3 × 20 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 10
- Pads
- 42
- Tracks, vias
- 113, 10
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Jul 2017
- Updated
- 19 Apr 2019
Overview
Attinyx5 programming is an open-source printed circuit board by ZeroPhone, from the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 19.3 × 20 mm with 11 parts on 10 nets, routed with 113 tracks and 10 vias.
It is built around the ATTINY13-20SU and ATTINY85-20SU. Its parts include 4 capacitors, 2 ICs, 2 connectors, 1 resistor and 1 crystal. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2
ATTINY13-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 1KB 2.7V~5.5V 20MHz 6 64Byte 64Byte 8 Bit AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontroller Units (MCUs/MPUs/SOCs)ATTINY85-20SU
SOIC-8-208mil-40℃~+85℃ 10bit 2.7V~5.5V 20MHz 512Byte 512Byte 6 8 Bit 8KB AVR Built-in FLASH SOIC-8-208mil Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
README
README.mdZeroPhone-Mod-PCBs
ZeroPhone mod board PCB files
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | C_Small | Capacitors_SMD:C_0805 | C1, C2, C3, C4 |
| 1 | 10K | Resistors_SMD:R_0805 | R1 |
| 1 | ATTINY13-20SU | Housings_SOIC:SSO-8_6.8x5.9mm_Pitch1.27mm_Clearance7mm | U2 |
| 1 | ATTINY85-20SU | Housings_SOIC:SSO-8_6.8x5.9mm_Pitch1.27mm_Clearance7mm | U1 |
| 1 | AVR-ISP-6 | Pin_Headers:Pin_Header_Straight_2x03_Pitch1.27mm_SMD | CON1 |
| 1 | CONN_01X06 | Pin_Headers:Pin_Header_Straight_1x06_Pitch2.54mm | P2 |
| 1 | Crystal | Crystals:Crystal_HC49-U_Vertical | Y1 |
| 1 | Jumper | footprints:GS2_SMALL | JP1 |
More from ZeroPhone/ZeroPhone-Mod-PCBs
12- 2 layers
- 2 layers17 × 36.8 mm
- 2 layers40 × 60 mm
- 2 layers40 × 60 mm
- 2 layers40 × 36 mm
- 2 layers36.5 × 31 mm
- 2 layers12.7 × 13.5 mm
- 2 layers26 × 17.2 mm
- 2 layers40 × 10 mm
- 2 layers40 × 27.5 mm
- 2 layers26 × 18 mm
Similar boards
- 2 layers43.7 × 21.1 mm
- 2 layers39 × 31.5 mm
Dell charger
potatopplking/dell-charge-spoofer
Yet another spoofer for Dell laptop charging.
15 partsApache-2.0 - 2 layers65 × 56.5 mm
SuperPower RPi KiCAD
SensorsIot/SuperPower
Here you should find the best power supplies for your low-power projects
122 parts600 - 2 layers18.8 × 8.1 mm
Dell charger emulator
KivApple/dell-charger-emulator
Emulator of original Dell charger using ATTINY85
6 parts154 - 2 layers14 × 17.3 mm
- 2 layers43.9 × 29 mm
C64Saver2-addon
bwack/C64-Saver-bwack
C64 Saver v1 and v2 - Overvoltage protection for the C64 and its power brick.
43 parts124 - 2 layers61 × 36.8 mm
- 2 layers200 × 100 mm
Regalodilara
valerionew/very-good-uc-doggos
A special graduation present for a special friend. Six microcontrollers in one devboard
91 parts50
Questions
How big is the Attinyx5 programming PCB?
It measures 19.3 × 20 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Attinyx5 programming use?
11 parts, built around the ATTINY13-20SU and ATTINY85-20SU. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Attinyx5 programming KiCad files?
From the ZeroPhone/ZeroPhone-Mod-PCBs repository on GitHub, at the commit this page was made from: the board is attinyx5_programming/attinyx5_programming.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Attinyx5 programming design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).