Skip to the content
2 layers60 × 40 mmTouch n drink, the printed circuit board in 3D

Hardware and firmware for cashless payment device for cold drinks at the aeroclub at EDLH

Size
60 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
13
Nets
18
Pads
53
Tracks, vias
118, 18
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
7 Jul 2024
Updated
22 Jul 2026

Overview

Touch n drink is an open-source printed circuit board by zargony, from the zargony/touch-n-drink repository on GitHub, published under the EUPL-1.2 licence. It is a 2-layer board of 60 × 40 mm with 13 parts on 18 nets, routed with 118 tracks and 18 vias.

It is built around the S8550. Its parts include 3 resistors, 3 connectors, 1 IC and 1 transistor. It belongs with the radio and wireless and lEDs and displays boards and the ESP32 and RISC-V boards of this library.

Main components

1

README

pcb/README.md

Touch 'n Drink PCB

Custom PCB

A custom PCB holds the ESP32-C3 Module, a buzzer and connectors to wire up display, keypad and NFC reader. The PCB is quite simple and easy to manufacture. Choose any manufacturer you like.

If you don't want to manufacture a PCB, it's also easily possible to wire up components on a perfboard (see below).

Soldered PCB:

Soldered PCB

Empty PCB:

Empty PCB

Rendered PCB model:

Rendered PCB model

PCB Layout:

PCB layout

Components

  • 60x40 mm custom 2-layer PCB
  • 1x ESP32-C3 SuperMini (AliExpress) (Amazon) (Model)
  • 1x Passive buzzer, THT, 12085
  • 1x S8550, SMT, TSOT-23 (or other generic NPN transistor, BEC pin ordering)
  • 1x 1k resistor, SMT, 0805
  • 2x 5k resistor, SMT, 0805
  • 1x 4-pin JST PH header, SMT, horizontal, S4B-PH-SM4-TB
  • 1x 5-pin JST PH header, SMT, horizontal, S5B-PH-SM4-TB
  • 1x 7-pin JST PH header, SMT, horizontal, S7B-PH-SM4-TB

Perfboard (optional, instead of PCB)

Instead of manufacturing a custom PCB, you can wire up components on a 60x40 mm perfboard.

Perfboard wiring

Components

Parts

13
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
25KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2
11KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
1BuzzerBuzzer_Beeper:MagneticBuzzer_ProSignal_ABT-410-RCBZ1
1DisplayConnector_JST:JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_HorizontalJ1
1ESP32-C3 SuperMiniESP32-C3_SuperMini:ESP32-C3_SuperMiniU1
1KeypadConnector_JST:JST_PH_S7B-PH-SM4-TB_1x07-1MP_P2.00mm_HorizontalJ3
1NFCConnector_JST:JST_PH_S5B-PH-SM4-TB_1x05-1MP_P2.00mm_HorizontalJ2
1S8550Package_TO_SOT_SMD:TSOT-23Q1

Similar boards

  • 2 layers128 × 77 mmScale, the printed circuit board in 3D

    Scale

    Jana-Marie/lab-balance

    https://twitter.com/_Jana_Marie/status/1270040286710968321

    59 parts34
  • 2 layersIEC-62056-21-Optical Probe, the printed circuit board in 3D

    IEC-62056-21-Optical Probe

    twam/IEC-62056-21-Optical-Probe

    Optical-Probe for reading out power meters supporting IEC 62056-21 via USB

    38 parts33
  • 2 layers60 × 40 mmForcegauge, the printed circuit board in 3D

    Forcegauge

    szbeni/forcegauge

    Traning for climbing. Load cell with HX711 and real time plotting,

    77 parts18GPL-3.0
  • 2 layers71.1 × 50.8 mmPower supply and amplifier, the printed circuit board in 3D

    Power supply and amplifier

    roybaer/sound_source

    Design documents for Disney Sound Source (DSS) compatible hardware

    34 parts9
  • 2 layers121 × 75.5 mmJlctest, the printed circuit board in 3D

    Jlctest

    cjheath/jlcbasic

    JLC Basic parts library for Kicad fetched and converted from EasyEDA

    46 parts5
  • 2 layers81.2 × 40 mmSingle scale v3 kicad, the printed circuit board in 3D

    Single scale v3 kicad

    IoTReady/esp32-wifi-ble-weighing-scale

    This is a weighing scale designed to share data over Wi-Fi using esp32 WROOM32 module. For the weighing scale we are using a load cell and measuring the output using a HX711 24-bit ADC designed for weigh scales and…

    59 parts5
  • 2 layers54.6 × 34.9 mmDoc, the printed circuit board in 3D

    Doc

    potato1992/PCSwitchPi

    Control PC power buttons (power/reset/force power down) using a raspberry pi through Web interface

    15 parts5Apache-2.0
  • 4 layers39.6 × 19.6 mm0102-TILEDAP, the printed circuit board in 3D

    0102-TILEDAP

    TileParts/0102-TILEDAP

    一个 DAPLink 调试器,附带 USB-UART 桥接功能

    57 parts5

Questions

How big is the Touch n drink PCB?

It measures 60 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Touch n drink use?

13 parts, built around the S8550. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Touch n drink KiCad files?

From the zargony/touch-n-drink repository on GitHub, at the commit this page was made from: the board is pcb/touch-n-drink.kicad_pcb and its schematic pcb/touch-n-drink.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Touch n drink design in my own project?

Its repository publishes it under the EUPL-1.2 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).