2 layers70.5 × 43.3 mm
2 layers69.2 × 50 mm
UGR-22 Screen
z8bi/Universityfork for advanced programming 3 assignment
- Size
- 69.2 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 64
- Pads
- 308
- Tracks, vias
- 725, 116
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Apr 2026
- Updated
- 19 May 2026
Overview
UGR-22 Screen is an open-source printed circuit board by z8bi, from the z8bi/University repository on GitHub. It is a 2-layer board of 69.2 × 50 mm with 73 parts on 64 nets, routed with 725 tracks and 116 vias.
It is built around the STM32L432KCU6, MCP2562-E/MFVAO and TSC2004IRTJR, with the TPS562200DDC and SS24A among its other parts. Its parts include 26 capacitors, 17 resistors, 7 ICs, 7 connectors and 3 diodes. It belongs with the STM32 boards of this library.
Main components
5
STM32L432KCU6
UFQFPN-32(5x5)-40℃~+85℃ 1.71V~3.6V 12bit 12bit 256KB 26 32 Bit 64KB 80MHz ARM Cortex-M4 Built-in FLASH UFQFPN-32(5x5) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)
MCP2562-E/MFVAO
DFN-8-40℃~+125℃ 1Mbps 4.5V~5.5V CAN Transceiver DFN-8 CAN Transceivers ROHSMicrochip TechnologyCAN Transceivers
TSC2004IRTJR
QFN20-EP(4x4)4-Wire Resistive Built-in temperature sensor I2C、Serial QFN20-EP(4x4) Touch Screen Controllers ROHSTexas InstrumentsTouch Screen Controllers
TPS562200DDC
UncategorisedTexas Instruments
SS24A
SMA(DO-214AC)Schottky DiodesSUNMATE Elec
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | 0.1u | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C4, C5, C6, C7, C8, C11, C12, C13, C14, C23, C24, C25, C26 |
| 5 | 10k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R4, R5, R9, R11 |
| 4 | 100 | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R2, R3, R6, R7 |
| 4 | 10n | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C19, C20, C21, C22 |
| 4 | 1K | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R12, R13, R14, R15 |
| 4 | 22u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C15, C16, C17, C18 |
| 3 | JMP_SW1_1 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP3, JP5 |
| 2 | 1.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R16, R17 |
| 2 | 15u | Capacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C9, C10 |
| 2 | 19pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2, C3 |
| 2 | 4.7u | Inductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolder | L1, L2 |
| 2 | JMP_SW1_2 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP2, JP4 |
| 2 | TPS562200 | Package_TO_SOT_SMD:SOT-23-6 | U4, U5 |
| 1 | 0.75A | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F1 |
| 1 | 15V | Diode_SMD:D_SMA_Handsoldering | D2 |
| 1 | 29.4k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R10 |
| 1 | 32.768KHz | Crystal:Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm_HandSoldering | Y1 |
| 1 | 56.2k | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R8 |
| 1 | 8MHz | Oscillator:Oscillator_SMD_Fordahl_DFAS15-4Pin_5.0x3.2mm | X1 |
| 1 | CAN_TVS | Package_TO_SOT_SMD:SOT-23 | D3 |
| 1 | Conn_01x08_Male | Connector_Molex:Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal | J1 |
| 1 | DT028ATFT | Connector_FFC-FPC:Hirose_FH12-45S-0.5SH_1x45-1MP_P0.50mm_Horizontal | J3 |
| 1 | LOGO | Library:UGR_ALL_SILK_50mm | G*** |
| 1 | LOGO | Library:UGR_Soldermask_10mm | G*** |
| 1 | LOGO | Library:UGR_SILK_10mm | G*** |
| 1 | MCP2562-E-MF | Package_DFN_QFN:DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U3 |
| 1 | MCP2562-E-SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | S25FL128S | Library:WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm | U2 |
| 1 | SS24A | Diode_SMD:D_SMA | D1 |
| 1 | STM32L432K | Package_DFN_QFN:UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm | U1 |
| 1 | SW1 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J4 |
| 1 | SW2 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J5 |
| 1 | SW3 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J6 |
| 1 | SW4 | Connector_Molex:Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal | J7 |
| 1 | SWD | Connector_Harwin:Harwin_M20-89004xx_1x04_P2.54mm_Horizontal | J2 |
| 1 | TSC2004IRTJ | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U6 |
More from z8bi/University
1Similar boards
- 2 layers68 × 100 mm
Solderparty keyboard featherwing hw keyboard featherwing
oomlout/oomlout_oomp_project_bot_v_2
96 parts - 4 layers92 × 60 mm
- 2 layers220 × 120 mm
- 2 layers145 × 90 mm
- 4 layers45.7 × 27.9 mm
KapukiTRX hw trx
bodri/kapukiTRX-hw-trx
DIY RC transmitter/receiver system based on SX1280 chipset for RC planes
98 parts9MIT - 2 layers
- 4 layers73 × 56 mm
- 2 layers337 × 195.6 mm
Questions
How big is the UGR-22 Screen PCB?
It measures 69.2 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the UGR-22 Screen use?
73 parts, built around the STM32L432KCU6, MCP2562-E/MFVAO, TSC2004IRTJR and TPS562200DDC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the UGR-22 Screen KiCad files?
From the z8bi/University repository on GitHub, at the commit this page was made from: the board is UGR/Old_Screen_25/Screen/UGR-22 Screen.kicad_pcb and its schematic UGR/GUD_Flight_Controler_V.1/GUD_Flight_Controler_V.1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the UGR-22 Screen design in my own project?
Its repository states no licence, so its author keeps all rights: ask z8bi before reusing the design.