

OctoTemp
- Size
- 47.3 × 34 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 48
- Nets
- 33
- Pads
- 135
- Tracks, vias
- 200, 19
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Aug 2015
- Updated
- 9 Jul 2016
Overview
OctoTemp is an open-source printed circuit board by z2amiller, from the z2amiller/snippets repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 47.3 × 34 mm with 48 parts on 33 nets, routed with 200 tracks and 19 vias.
It is built around the ESP-12E and SPX3819M5-L. Its parts include 17 resistors, 13 capacitors and 3 ICs. It belongs with the ESP8266 boards of this library.
Main components
2ESP-12E
SMD,24x16mm-20℃~+70℃ -90dBm 16dBm 170mA 2.4GHz 3V~3.6V 56mA 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、SPI、I2C SMD,24x16mm WiFi Modules ROHSAi-ThinkerWiFi ModulesSPX3819M5-L
SOT-23-5SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMaxLinearVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdsnippets
Parts
48| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R5, R6, R7, R8, R10, R11, R12, R13, R14, R15, R16, R17 +1 |
| 11 | 100nf | Capacitors_SMD:C_0603_HandSoldering | C3, C4, C5, C10, C11, C12, C13, C14, C15, C16, C17 |
| 8 | CONN_01X02 | w_conn_jst-ph:b2b-ph-kl | CH0, CH1, CH2, CH3, CH4, CH5, CH6, CH7 |
| 3 | 1uf | Capacitors_Tantalum_SMD:TantalC_SizeA_EIA-3216_Reflow | CP1, CP2, CP3 |
| 2 | 10uf | Capacitors_SMD:C_0805_HandSoldering | C1, C2 |
| 1 | ADC128D818 | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U3 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02 | PWR + |
| 1 | CONN_02X03 | Pin_Headers:Pin_Header_Straight_2x03 | PROG |
| 1 | ESP-12E | ESP8266:ESP-12E | U1 |
| 1 | SPX3819M5 | TO_SOT_Packages_SMD:SOT-23-5 | U2 |
The 46 most common of 48 parts.
More from z2amiller/snippets
5- 2 layers42.5 × 29 mm

- 2 layers11.4 × 11.4 mm

- 2 layers16.5 × 16.5 mm

- 2 layers12.7 × 12.7 mm

- 2 layers11.4 × 8.9 mm

Similar boards
- 2 layers181 × 97 mm

OpenDeck r3.1.2
shanteacontrols/OpenDeck
A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.
262 parts960Apache-2.0 - 2 layers91.7 × 70 mm

Current logger
hnz1102/current-logger
This tool provides a logging function that gets data on voltage, current and power consumption. Voltage input range is from 0 to 85V, Maximum current input is 15A.
64 parts18 - 2 layers68.3 × 57.7 mm

Sdmux4
hnz1102/sdcdmux-emmc
SD CARD and eMMC Device Multiplexer with Infrared Remote Controller
115 parts16MIT - 2 layers30 × 43 mm

Currentmeter
hnz1102/mini-current-meter
Mini Current Meter using INA228A ultra-precise digital power monitor
40 parts10 - 4 layers42 × 50 mm

SimpleFC G
wangyeee/OpenHardware
Collections of hardware design related to my drone project.
134 parts10BSD-3-Clause - 4 layers21.6 × 48.4 mm

SDWire
3mdeb/sd-mux
Control application for SD Wire imported from: https://git.tizen.org/cgit/tools/testlab/sd-mux/
83 parts8Apache-2.0 - 4 layers21.6 × 48.4 mm

SDWire
bitsy-ai/printnanny-sdwire
A modified version of Tizen SDWire https://wiki.tizen.org/SDWire
88 parts7Apache-2.0 - 2 layers185 × 98 mm

Questions
How big is the OctoTemp PCB?
It measures 47.3 × 34 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OctoTemp use?
48 parts, built around the ESP-12E and SPX3819M5-L. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OctoTemp KiCad files?
From the z2amiller/snippets repository on GitHub, at the commit this page was made from: the board is octotemp/hardware/OctoTemp.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the OctoTemp design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).