

Keyface
A set of printed circuit boards created by me.
- Size
- 66.7 × 60.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 41
- Nets
- 53
- Pads
- 218
- Tracks, vias
- 696, 61
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Mar 2025
- Updated
- 18 Sep 2025
Overview
Keyface is an open-source printed circuit board by z00m128, from the z00m128/pcb-resources repository on GitHub. It is a 2-layer board of 66.7 × 60.3 mm with 41 parts on 53 nets, routed with 696 tracks and 61 vias.
It is built around the PIC16F84-10/P, 74LS125DC and 74LS32SC, with the BAT42 and BC547 among its other parts. Its parts include 15 resistors, 7 capacitors, 5 ICs, 4 diodes and 1 transistor. It belongs with the PIC boards of this library.
Main components
5PIC16F84-10/P
PDIP-180℃~+70℃ 1.75KB 10MHz 13 4V~6V 64Byte 68Byte 8 Bit External FLASH PIC PDIP-18 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)74LS125DC
-0℃~+70℃ 1 10ns@5.5V,50pF 15mA 18mA 24mA 4 4.5V~5.5V 74LS Power-off isolation、Output enable Tri-State Unidirectional - Buffers, Drivers, Receivers, TransceiversTexas InstrumentsBuffers, Drivers, Receivers, Transceivers74LS32SC
-- Logic Gates ROHSTexas InstrumentsLogic GatesBAT42
DO-35-65℃~+125℃ 200mA 30V 4A 500nA@25V 650mV@50mA Independent DO-35 Schottky Diodes ROHSSTMicroelectronicsSchottky DiodesBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
README
README.mdMy PCB library
Here is the set of printed circuit boards created by me over a time. I used mostly KiCad (PCBs created from scratch) or Sprint-Layout 6.0 (PCBs recreated from scans or photos).
ZX Spectrum 128k replica
Recreated PCB of ZX Spectrum 128k. I felt sorry for the Toastrack owner who contacted me with a repair request and who fell victim to eBay fraud, so I decided to make a replica.

ZX Cherry Keyboard
Another iteration of a mechanical keyboard for the ZX Spectrum. This time my own, designed for one of my projects, but it is compatible with +2/+3 case.

Didaktik M'92
A clone of the ZX Spectrum computer manufactured by the Slovak company Didaktik v.d. in the early 1990s. The recreated PCB has been verified and is functional.

Didaktik Kompakt, revision 2.3
A clone of the ZX Spectrum computer manufactured by the Slovak company Didaktik v.d. in the early 1990s. This clone is actually a Didaktik M with a built-in D80 disk system running the MDOS operating system. The recreated PCB has been verified and is functional.

Melodik 2, revisions 1.0, 1.1 and 2.0
Melodik was an audio interface for the ZX Spectrum and compatibles, manufactured by Didaktik v.d. during the 1990s. It was of poor quality, suffered from several ailments and broke down. These were my 3 attempts to recreate it so that the result fit into the original box. The revisions differ only minimally and are a consequence of KiCad not being able to properly open projects created in its older versions. All have a fixed oscillator error, removed collision with D40 / D80 / Kompakt floppy controllers. The latest revision 2.0 is not tested but should be functional. It has an added filter in the LM386 power supply.

KeyFace
A PS/2 keyboard interface for ZX Spectrum, internal and external versions. Both were developed by MDV in late 90's for Kompakt Servis company. Both PCBs are verified and working.

Lamac CPM
A board used to modify a ZX Spectrum computer to expand memory (80k-256k) for use with CP/M. It was common modification in former Czechoslovakia, well documented in local electronics magazine. This PCB was not vertified yet.

PMD ColorAce
Hardware modification for PMD85 computer. It extends its capabilities and allows to display 7 different colors on the black background. This is my own iteration of PCB. It was not verified yet.

PMD KeyFace
PS/2 keyboard interface for PMD85 computer. This is my own iteration of PCB. It was not verified yet.

Kicad libraries
Set of libraries for KiCad 6.0 and newer that you may need if you want to edit some of my projects.
GAL20V8, GAL22V10, AY-3-8912, AY-3-8910, ZX Spectrum expansion connector.
NOTICE
The production of these printed circuit boards for profit is strictly prohibited. See license.
Disclaimer
All PCBs posted here are just my hobby projects and not professional designs. They may contain errors, glitches, or other unforeseen problems. Some of them have been tested quite extensively, but I make no warranties as to functionality or fitness for a particular purpose. If you connect any of these products to any of your equipment, you do so entirely at your own risk and I am not responsible for any damages.
Parts
41| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 4k7 | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R31, R32, R33, R34, R35, R36, R37, R38 |
| 4 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R21, R22, R23, R24 |
| 4 | BAT42 | Diode_THT:D_DO-34_SOD68_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 4 | MountingHole_2.5mm_Pad_Via | MountingHole:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 560R | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R11, R12, R13 |
| 2 | 100n | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C4, C5 |
| 2 | 33p | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C6, C7 |
| 2 | 47p | Capacitor_THT:C_Disc_D3.0mm_W2.0mm_P2.50mm | C2, C3 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92 | T1, T2 |
| 2 | Conn_01x01_Male | Connector_Pin:Pin_D1.0mm_L10.0mm | GND1, VCC1 |
| 2 | MHB8804 | Package_DIP:DIP-24_W15.24mm | IC2, IC3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C1 |
| 1 | 4 MHz | Crystal:Crystal_HC49-U_Vertical | Q1 |
| 1 | 74LS125 | Package_DIP:DIP-14_W7.62mm | IC4 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm | IC5 |
| 1 | Conn_02x13_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x13_P2.54mm_Vertical | K1 |
| 1 | PIC16F84 | Package_DIP:DIP-18_W7.62mm | IC1 |
More from z00m128/pcb-resources
6- 2 layers285 × 116 mm

- 2 layers82.6 × 85.5 mm

- 2 layers78.1 × 85.1 mm

- 2 layers74 × 85.2 mm

- 2 layers58.2 × 45.2 mm

- 2 layers54.7 × 43.7 mm

Similar boards
- 2 layers50 × 50 mm

- 2 layers160 × 100 mm

- 2 layers99.1 × 99.1 mm

Rev 1.0 Release
Jipxmaster/CannedICs-Assembly
Son archivos viejos que tengo -El compilador es un ejecutable que usa el archivo config -EL archivo de la computadora está en formato .circ para logisim -Correr la simulación a 4096 Hz, es muy lento
69 parts - 2 layers99.1 × 99.7 mm

RC6502 General Video Adapter
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
80 parts193GPL-3.0 - 2 layers142.2 × 52.1 mm

OptolinkDuoBlock
vich-667/OptolinkDuoBlock
This project was created to have local access to the viessmann heating system to monitor and control and have the vitoconnect still working.
35 parts2MIT - 2 layers40 × 37.5 mm

Kezfertotlenito
simonyiszk/kezfertotlenito.sch
Liftbe szerelhető, alacsony fogyasztású kézfertőtlenítő tervei
31 parts - 2 layers231.1 × 106.7 mm

- 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56
Questions
How big is the Keyface PCB?
It measures 66.7 × 60.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Keyface use?
41 parts, built around the PIC16F84-10/P, 74LS125DC, 74LS32SC and BAT42. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Keyface KiCad files?
From the z00m128/pcb-resources repository on GitHub, at the commit this page was made from: the board is KeyFace/source/keyface.kicad_pcb and its schematic Melodik2/v2.0/source/Melodik2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Keyface design in my own project?
Its repository states no licence, so its author keeps all rights: ask z00m128 before reusing the design.