Skip to the content
2 layers67.1 × 48.1 mmBuck converter, the printed circuit board in 3D

Buck converter

yuvve/aeroponics2
Size
67.1 × 48.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
7
Pads
30
Tracks, vias
42, 4
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
1 Sep 2025
Updated
14 Jan 2026

Overview

Buck converter is an open-source printed circuit board by yuvve, from the yuvve/aeroponics repository on GitHub. It is a 2-layer board of 67.1 × 48.1 mm with 10 parts on 7 nets, routed with 42 tracks and 4 vias.

It is built around the LM2596S-ADJ. Its parts include 2 connectors, 1 IC, 1 diode and 1 inductor. It belongs with the power boards of this library.

Main components

1

README

README.md

aeroponics

EC sensor - current state

At the current state there is no EC-sensor that is done. However, there is a simulation file that has been made that is meant to be worked on so that it may one day meet specification for the rest of the project. Thease specifications include but are not limited to: being able to be powered by the given power source, not requireing negative source and have an output range between 0 - 3.3V as not to fry the microcontroller.

Parts

10
QtyValueFootprintReferences
3Caeroponics:TPME158K004R0015Cff1, Cin1, Cout1
2R_Potentiometer_TrimPotentiometer_SMD:Potentiometer_Bourns_3314J_VerticalRV1, RV2
2Screw_Terminal_01x02aeroponics:terminal-block-2-pole-TB006-508-02BEJ1, J2
1Daeroponics:MBRS360T3GD1
1Laeroponics:36561040M101TL1
1LM2596S-ADJPackage_TO_SOT_SMD:TO-263-5_TabPin3U1

Similar boards

  • 2 layers90 × 53.4 mmOpenOx, the printed circuit board in 3D

    OpenOx

    hacklabkyiv/openox-pcb

    PCB design for OpenOx - open source oxygen concentrator

    43 parts7GPL-3.0
  • 2 layers78.7 × 58.4 mmAGV SENSOR PCB 2, the printed circuit board in 3D

    AGV SENSOR PCB 2

    Ashutoshkarve007/STM32_Learning

    Learining STM32

    53 parts3
  • 2 layers40 × 60 mmScaner v1, the printed circuit board in 3D

    Scaner v1

    Aleksei327/ESP32-C5-OBD2-Scanner

    DIY dual-CAN OBD2 adapter on Seeed XIAO ESP32-C5 with a Flutter Android app. Working prototype, tested on a Citroën C3 II: full read-only ECU scan, PSA fault codes, live data. Single-sided home-etched KiCad board.

    34 parts2
  • 2 layers85.1 × 99.1 mmProject f, the printed circuit board in 3D

    Project f

    Nodraak/SpeedOfLight

    Reenactment of experiment(s) to measure the speed of light

    15 parts2
  • 2 layers105.6 × 72 mmSolar mppt charge controller, the printed circuit board in 3D

    Solar mppt charge controller

    Pendu1699/solar-mppt-charge-controller

    ESP32-based solar MPPT charge controller, custom PCB, perturb & observe tracking algorithm, logged efficiency test data.

    25 parts2MIT
  • 2 layers100 × 100 mmFSAE BaseBoard, the printed circuit board in 3D

    FSAE BaseBoard

    Pereyzaquer/Formuna-SAE-UTN-FRBA

    UTN-FRBA Formula SAE

    71 parts2
  • 6 layers100.5 × 101.5 mmCustom ESC, the printed circuit board in 3D

    Custom ESC

    0BitsnBytes/McQueen

    an overpowered rc car that poses a danger to my safety :)

    192 parts1GPL-3.0
  • 2 layers31 × 58 mmBuck converter, the printed circuit board in 3D

    Buck converter

    Dhruv2212-star/Buck-converter-module-

    Buck Converter Module

    14 parts1

Questions

How big is the Buck converter PCB?

It measures 67.1 × 48.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Buck converter use?

10 parts, built around the LM2596S-ADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Buck converter KiCad files?

From the yuvve/aeroponics repository on GitHub, at the commit this page was made from: the board is design/buck-converter/kicad/buck-converter.kicad_pcb and its schematic design/buck-converter/kicad/buck-converter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Buck converter design in my own project?

Its repository states no licence, so its author keeps all rights: ask yuvve before reusing the design.