

BarRobot
- Size
- 39 × 58 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 40
- Pads
- 101
- Tracks, vias
- 147, 98
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 17 Sep 2020
- Updated
- 26 Sep 2021
Overview
BarRobot is an open-source printed circuit board by yutotnh, from the yutotnh/BarRobot repository on GitHub, published under the MIT licence. It is a 2-layer board of 39 × 58 mm with 27 parts on 40 nets, routed with 147 tracks and 98 vias.
It is built around the STM32F303K8T6, RN4020-V/RM and AP2210N-3.3TRG1. Its parts include 7 connectors, 3 capacitors, 3 resistors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Main components
3STM32F303K8T6
LQFP-32(7x7)-40℃~+85℃ 12bit 12bit 16KB 25 2V~3.6V 32 Bit 64KB 72MHz ARM Cortex-M4 Built-in FLASH LQFP-32(7x7) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)RN4020-V/RM
SMD7.5dBm OTA (Over-The-Air) upgrade、Encryption function SPI、UART、AIO、PIO SMD Bluetooth Modules ROHSMicrochip TechnologyBluetooth ModulesAP2210N-3.3TRG1
SOT-23-40℃~+125℃@(Tj) 1 13.2V 1uA 250mV@(300mA) 3.3V 300mA 75dB@(100Hz) Fixed Over Current Protection、Over Temperature Protection Positive SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSDiodes IncorporatedVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | SamcSys_Parts:MountingHole_1.2mm | H1, H2, H5, H6 |
| 2 | 2.2k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Castellated | D2, D3 |
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H3, H4 |
| 2 | RS204MD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1, J3 |
| 1 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C3 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R3 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1 |
| 1 | 2.2u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C2 |
| 1 | AP2210N-3.3TRG1 | Package_TO_SOT_SMD:SOT-23W_Handsoldering | U1 |
| 1 | AdafruitBNO055 | SamcSys_Parts:AdafruitBNO055 | IC1 |
| 1 | Conthrough | SamcSys_Parts:Conthrough_1x05_P2.54mm_Vertical | J5 |
| 1 | Conthrough | SamcSys_Parts:Conthrough_1x03_P2.54mm_Vertical | J4 |
| 1 | D_Schottky | Diode_SMD:D_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | Fuse | SamcSys_Parts:MF505 | F2 |
| 1 | Polyfuse | Fuse:Fuse_Littelfuse_395Series | F1 |
| 1 | RN4020 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | STM32F303K8 | Package_QFP:LQFP-32_7x7mm_P0.8mm | U2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J6 |
| 1 | UltraSonic | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J2 |
More from yutotnh/BarRobot
1- 2 layers39 × 75 mm

Similar boards
- 2 layers84.3 × 48.4 mm

- 2 layers66 × 71 mm

- 4 layers40 × 40 mm

CANBoard
corygrant/CANBoard
Hardware - CAN enabled small input / output expansion board. Switch panels, steering wheel buttons/knobs, etc.
83 parts53MIT - 2 layers104 × 43.3 mm

Serial snooper
can-caglar/Data-Logger-STM32
The Serial Snooper is a UART data logger with automatic baud rate detection, real-time data stamping and a command-line-interface for configuration, running on an STM32F3 microcontroller.
101 parts4 - 2 layers

Display and comms
LeHack/SPSP
Particulate matter pollution monitoring system (:poland: System Pomiaru Stężenia Pyłu w powietrzu)
27 parts3 - 2 layers50 × 50 mm

- 2 layers28 × 41 mm

GRRNble
takjn/GRRNble
DIY Smartwatch using Renesas RL78/G13 MCU and RN4020 ble module with Android companion app.
59 parts2 - 2 layers62 × 88 mm

Questions
How big is the BarRobot PCB?
It measures 39 × 58 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BarRobot use?
27 parts, built around the STM32F303K8T6, RN4020-V/RM and AP2210N-3.3TRG1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BarRobot KiCad files?
From the yutotnh/BarRobot repository on GitHub, at the commit this page was made from: the board is BarRobot.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the BarRobot design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).