4 layers60.6 × 72.3 mm
ESP32
KirtiChickamath/ESP32-IoT-sensor-board
ESP32- IoT sensor board. 4-layer PCB, designed in KiCad . Features LiPo charging, USB-C, SPI flash, SD card, BME280, and more.
90 parts2
4 layers79 × 50.9 mm
Esp32c3-peter board
yusefkarim/electronics-playground- Size
- 79 × 50.9 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 87
- Nets
- 76
- Pads
- 328
- Tracks, vias
- 719, 136
- Pours
- 12
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 8 Jun 2025
- Updated
- 8 Jun 2025
Overview
Esp32c3-peter board is an open-source printed circuit board by yusefkarim, from the yusefkarim/electronics-playground repository on GitHub, published under the MIT licence. It is a 4-layer board of 79 × 50.9 mm with 87 parts on 76 nets, routed with 719 tracks and 136 vias.
It is built around the ESP32-C3-WROOM-02-H4, MCP73871EV and BME280, with the MAX4466EXK+T, W25Q32JVSSIQ and GSD090012SEU among its other parts. Its parts include 32 resistors, 22 capacitors, 7 ICs, 6 diodes and 5 connectors. It belongs with the ESP32 and RISC-V boards of this library.
Main components
12
ESP32-C3-WROOM-02-H4
SMD,20x18mm-105dBm -40℃~+105℃ 2.4GHz 20.5dBm 345mA 3V~3.6V 82mA Bluetooth5.0 ESP32-C3 On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,20x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesMCP73871EV
-ModulesMicrochip Technology
BME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity Sensor
MAX4466EXK+T
SC-70-5-40℃~+85℃ 0.03% 1-Channel 112dB 2.4V~5.5V 24A SC-70-5 Audio Amplifiers ROHSMaxim Integrated (Analog Devices)Audio Amplifiers
W25Q32JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 133MHz 1uA 2.7V~3.6V 20 Years 32Mbit 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHGSD090012SEU
-2.95mm Connector and Ejector MicroSD Card (TF Card) Push-Pull With Locating Pins Yes - SD Card / Memory Card Connector ROHSAmphenolSD Card / Memory Card Connector
TEMT6000X01
1206-40℃~+100℃ 1.05mm 2mm 3nA 4mm Light Intensity 1206 Ambient Light Sensors ROHSVishay IntertechnologyAmbient Light Sensors
USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)
LTST-C170KRKT
0805-55℃~+85℃ 130° 20mA 2V 54mcd 631nm 639nm 75mW Discrete Diode Red Water Clear 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
BC817
SOT-231 NPN 100nA 150MHz 300mW 40 45V 500mA 5V 700mV NPN SOT-23 Bipolar (BJT) ROHSShikuesBipolar (BJT)LTST-C170GKT
0805-55℃~+85℃ 100mW 130° 2.1V 20mA 565nm 569nm 6mcd Discrete Diode Water Clear Yellow Green 0805 LED Indication - Discrete ROHSLite-OnLED Indication - Discrete
0ZCH0110AF2E
1210-40℃~+85℃ 1.1A 100A 16V 2.2A 210mΩ 300ms 60mΩ 1210 Resettable Fuses ROHSBel FuseResettable Fuses
README
README.mdElectronics Playground
Projects
ESP32-C3 Peter Board
- Purpose: for me to get familiar with KiCad and PCB design
- Component overview:
- ESP32-C3 (ESP32-C3-WROOM-02-H4)
- Microphone (CMC-5042PF-AC) and amplifier (MAX4466EXK)
- Photo diode (TEMT6000X01)
- Humidity and pressure sensor (BME280)
- SD card (GSD090012SEU)
- Additional on-board flash memory (W25Q32JVSSIQ)
- USB (Type-C) connector (only for power delivery)
- Battery Charge Management Controller (MCP73871)
- Proper 3.3V voltage regulation (LM1117MPX-3.3)
- Designed following Peter Dalmaris' tutorial: KiCad 9: Design & assemble an ESP32 IoT 4-layer PCB
- Also incorporated knowledge from Peter's online course and book: KiCad Like a Pro 3rd edition
Parts
87| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 0.1u | Capacitor_SMD:C_0805_2012Metric | C1, C2, C5, C8, C10, C13, C14, C15, C16, C18, C20, C21 |
| 6 | 10k | Resistor_SMD:R_0805_2012Metric | R19, R23, R30, R32, R33, R34 |
| 6 | 470 | Resistor_SMD:R_0805_2012Metric | R7, R8, R9, R10, R14, R18 |
| 4 | 10u | Peter Board Footprints:T491A | C3, C4, C7, C12 |
| 4 | 1u | Capacitor_SMD:C_0805_2012Metric | C6, C11, C19, C22 |
| 4 | 50 | Resistor_SMD:R_0805_2012Metric | R15, R16, R20, R22 |
| 3 | 2k | Resistor_SMD:R_0805_2012Metric | R5, R26, R28 |
| 3 | LTST-C170KRKT | Peter Board Footprints:LEDC2012X120N | LED1, LED4, LED6 |
| 2 | 10K | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R27, R29 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric | R24, R25 |
| 2 | 5k1 | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 2 | BC817 | Package_TO_SOT_SMD:SOT-23 | Q2, Q3 |
| 2 | LTST-C170GKT | Peter Board Footprints:LEDC2012X120N | LED2, LED5 |
| 1 | 0ZCH0110AF2E | Peter Board Footprints:FUSC3226X100N | F1 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R31 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric | C17 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R11 |
| 1 | 20k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 22K1 | Resistor_SMD:R_0805_2012Metric | R12 |
| 1 | 4.7u | Peter Board Footprints:T491A | C9 |
| 1 | 47K5 | Resistor_SMD:R_0805_2012Metric | R13 |
| 1 | B2B-PH-SM4-TB | Peter Board Footprints:JST_B2B-PH-SM4-TB | J2 |
| 1 | BME280 | Peter Board Footprints:PSON65P250X250X100-8N | U2 |
| 1 | Boot | Peter Board Footprints:SW_USLPT2819DT2TR | S1 |
| 1 | CMC-5042PF-AC | Peter Board Footprints:CUI_CMC-5042PF-AC | MK1 |
| 1 | CP2102N-Axx-xQFN20 | Package_DFN_QFN:SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm | U4 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J5 |
| 1 | ESP32-C3-WROOM-02-H4 | Peter Board Footprints:MODULE_ESP32-C3-WROOM-02-H4 | U3 |
| 1 | GSD090012SEU | Peter Board Footprints:AMPHENOL_GSD090012SEU | J3 |
| 1 | LM1117MPX-3.3 | Peter Board Footprints:VREG_LM1117MPX-3.3 | VR1 |
| 1 | LTST-C170TBKT | Peter Board Footprints:LEDC2012X120N | LED3 |
| 1 | MAX4466EXK | Peter Board Footprints:SOT65P210X110-5N | U7 |
| 1 | MCP73871 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | Reset | Peter Board Footprints:SW_USLPT2819DT2TR | S2 |
| 1 | SS-52400-002 | Peter Board Footprints:BELFUSE_SS-52400-002 | J1 |
| 1 | TEMT6000X01 | Peter Board Footprints:TRANS_TEMT6000X01 | Q1 |
| 1 | Test CS | TestPoint:TestPoint_Pad_D1.0mm | TP5 |
| 1 | Test CS_SD | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | Test MISO | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | Test MOSI | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | Test SCLK | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U5 |
| 1 | W25Q32JVSSIQ | Peter Board Footprints:SOIC127P790X216-8N | U6 |
The 85 most common of 87 parts.
Questions
How big is the Esp32c3-peter board PCB?
It measures 79 × 50.9 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Esp32c3-peter board use?
87 parts, built around the ESP32-C3-WROOM-02-H4, MCP73871EV, BME280 and MAX4466EXK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Esp32c3-peter board KiCad files?
From the yusefkarim/electronics-playground repository on GitHub, at the commit this page was made from: the board is esp32c3-peter-board/esp32c3-peter-board.kicad_pcb and its schematic esp32c3-peter-board/esp32-c3-02.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Esp32c3-peter board design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 4 layers96.5 × 54.4 mm
ESP32-IoT
ddennis18/ESP32-IoT-DevBoard
An ESP32-C3 based IoT controller board designed in KiCad. The board combines wireless control, sensor interfaces, local storage, audio/light sensing, USB connectivity, and single-cell Li-ion battery support on a compact…
88 parts1MIT - 4 layers79.3 × 53.6 mm
ESP-32
kaushal1020/esp32-c3-02-KiCAD-Design
A custom ESP32-C3-02 Development Board designed from scratch using KiCad. This repository contains the complete hardware design, including schematic, PCB layout, and supporting files for manufacturing and development.
88 parts1 - 4 layers93.8 × 58.9 mm
ESP-32 C3 demo project004
YUKESH0620/ESP32-C3-Sensor-PCB
This repository contains the complete hardware design of a custom ESP32-C3 based Smart Sensor Board, including schematics, PCB layout, and documentation.
93 parts1MIT - 4 layers79.5 × 61.4 mm
ESP32 IoT Project
Asaf66/ESP32-IoT-Sensor-Hub-Manufacturing-Ready-
hardware system based on ESP32-C3 (RISC-V architecture) on a 4-layer PCB for noise immunity. The project includes sensors (environment, light, and sound), smart power and charging management (MCP73871), and a user…
88 parts - 4 layers107.6 × 55 mm
ESP32-sensor board
chopda15/ESP32-sensor-board
Custom-designed ESP32-C3 IoT PCB with integrated Li-ion charging, environmental sensing, data logging, USB-C connectivity, and power-efficient embedded system architecture.
94 parts - 4 layers88 × 55.8 mm
- 4 layers85.4 × 54.6 mm
