

Goose45
45% keyboard PCB project.
- Size
- 247 × 75.4 mm
- Copper layers
- 2
- Thickness
- 1.2 mm
- Parts
- 140
- Nets
- 96
- Pads
- 614
- Tracks, vias
- 1,018, 415
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 27 Jul 2022
- Updated
- 30 Dec 2023
Overview
Goose45 is an open-source printed circuit board by yuhao-kuo, from the yuhao-kuo/goose45 repository on GitHub, published under the Apache-2.0 licence. It is a 2-layer board of 247 × 75.4 mm with 140 parts on 96 nets, routed with 1,018 tracks and 415 vias.
It is built around the TLV75533PDBV, USBLC6-2SC6 and 100UF/16V, with the 22PF/50V 10% among its other parts. Its parts include 53 switches, 46 diodes, 19 resistors, 13 capacitors and 3 ICs. It belongs with the STM32 boards of this library.
Main components
4TLV75533PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 238mV@(500mA) 25uA 3.3V 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Thermal Shutdown、Input undervoltage protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorised22PF/50V 10%
插件插件 Through Hole Ceramic Capacitors ROHSMade in ChinaThrough Hole Ceramic Capacitors
README
README.mdGoose45
Goose45 is a 45% keyboard project.
Parts
140| Qty | Value | Footprint | References |
|---|---|---|---|
| 51 | SW_Push | Switch_Keyboard_Hotswap_Kailh.pretty:SW_Hotswap_Kailh_MX | SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23, SW24, SW25 +35 |
| 46 | 1N4148 | Diode_SMD:D_SOD-323 | D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23, D24 +30 |
| 12 | 10K/5% | Resistor_SMD:R_0603_1608Metric | R1, R2, R5, R9, R10, R11, R12, R13, R14, R21, R22, R25 |
| 6 | 100nF/16V | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C8, C9 |
| 3 | 1uF/16V | Capacitor_SMD:C_0603_1608Metric | C1, C10, C11 |
| 2 | 100K/5% | Resistor_SMD:R_0603_1608Metric | R3, R4 |
| 2 | 100uF/16V | Capacitor_SMD:C_0603_1608Metric | C12, C13 |
| 2 | 22R/5% | Resistor_SMD:R_0603_1608Metric | R15, R18 |
| 2 | 22pF/50V | Capacitor_SMD:C_0603_1608Metric | C6, C7 |
| 2 | Stabilizer_Cherry_MX_2.00u | Mounting_Keyboard_Stabilizer.pretty:Stabilizer_Cherry_MX_2.00u | REF1, REF2 |
| 1 | 1.5K/5% | Resistor_SMD:R_0603_1608Metric | R19 |
| 1 | 100R/5% | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 39K/5% | Resistor_SMD:R_0603_1608Metric | R23 |
| 1 | Conn_01x02_Female | Connector_PinHeader_2.00mm:PinHeader_1x02_P2.00mm_Vertical | SW1 |
| 1 | Crystal_GND24 | Crystal:Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | X1 |
| 1 | Debugger | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J3 |
| 1 | SPI | Connector_PinHeader_2.00mm:PinHeader_1x05_P2.00mm_Vertical | J2 |
| 1 | STM32F103CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJ | SW2 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | USB connector | Connector_FFC-FPC:Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |
More from yuhao-kuo/goose45
6- 2 layers81 × 38.3 mm

- 2 layers72.5 × 35.1 mm

- 2 layers18 × 18 mm

- 2 layers74 × 17 mm

- 2 layers67 × 32 mm

- 2 layers14.8 × 16.7 mm

Similar boards
- 2 layers285 × 94.6 mm

- 2 layers285 × 95.1 mm

- 4 layers82.5 × 45 mm

Eumesmo poe-2rl v1
thermseekr/eumesmo-poe-2rl
PoE-powered ESP32 controller featuring 2x onboard SPST NO relays. Ideal for access control, doors, or isolated zones.
109 parts - 2 layers30 × 60 mm

- 2 layers68 × 25 mm

Hephaestus
TheColonelYoung/Hephaestus
Solder paste dispensor powered by stepper motor.
102 parts1GPL-3.0 - 2 layers102 × 66 mm

FREE ENERGY ESP
Sureshbkmr/Energy-Harvesting-Based-on-Beaden-Research-Paper
Based on Beaden Research Paper full custom PCB
60 parts - 2 layers80 × 50 mm

Greaseweazle F7 Plus V2
aerobaticant/Greaseweazle-F7-Plus
My board design for Keir Fraser's Greaseweazle
66 parts30 - 2 layers120 × 100 mm

Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT
Questions
How big is the Goose45 PCB?
It measures 247 × 75.4 mm and has 2 copper layers, 1.2 mm thick.
What parts does the Goose45 use?
140 parts, built around the TLV75533PDBV, USBLC6-2SC6, 100UF/16V and 22PF/50V 10%. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Goose45 KiCad files?
From the yuhao-kuo/goose45 repository on GitHub, at the commit this page was made from: the board is goose45rev3/goose45.kicad_pcb and its schematic goose45rev1/goose45.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Goose45 design in my own project?
Its repository publishes it under the Apache-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).