

Goose60rev2
It's a no-light 60% keyboard PCB project.
- Size
- 285 × 95.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 209
- Nets
- 136
- Pads
- 935
- Tracks, vias
- 1,490, 920
- Pours
- 958
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Jul 2022
- Updated
- 12 Oct 2026
Overview
Goose60rev2 is an open-source printed circuit board by yuhao-kuo, from the yuhao-kuo/goose60 repository on GitHub. It is a 2-layer board of 285 × 95.1 mm with 209 parts on 136 nets, routed with 1,490 tracks and 920 vias.
It is built around the RP2040, W25Q16JVSSIQ and TLV75533PDBV, with the TXS0108EPW, USBLC6-2SC6 and BAT54S among its other parts. Its parts include 74 switches, 68 diodes, 22 capacitors, 21 resistors and 5 ICs. It belongs with the RP2040 boards of this library.
Main components
8RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)W25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHTLV75533PDBV
SOT-23-5-40℃~+125℃@(Tj) 1 238mV@(500mA) 25uA 3.3V 46dB@(100kHz) 5.5V 500mA 71.5uVrms Fixed Over Current Protection、Thermal Shutdown、Input undervoltage protection Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsTXS0108EPW
TSSOP-20-40℃~+85℃ 1 1.4V~3.6V 1.65V~5.5V 60Mbps 8 Automatic direction detection、Output enable high-impedance、Integrated pull-up resistor Bidirectional Level translator Push-Pull、Open-drain TSSOP-20 Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level ShiftersUSBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)BAT54S
SOT-231 Pair Series Connection 1V@100mA 200mA 2uA@25V 30V 600mA SOT-23 Schottky Diodes ROHSMDDSchottky Diodes100UF/16V
C1812C1812 SMT ROHSJLCPCB AssemblyUncategorisedGZ2012D601TF
0805-55℃~+125℃ 1 300mΩ 500mA 600Ω@100MHz ±25% 0805 Ferrite Beads ROHSSunlordFerrite Beads
Parts
209| Qty | Value | Footprint | References |
|---|---|---|---|
| 63 | 1N4148 | Diode_SMD:D_0805_2012Metric | D1_1, D1_2, D1_3, D1_4, D1_5, D1_6, D1_7, D1_8, D1_9, D1_10, D1_11, D1_12, D1_13, D2_1, D2_10, D2_11 +47 |
| 51 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | SW1_1, SW1_2, SW1_3, SW1_4, SW1_5, SW1_6, SW1_7, SW1_8, SW1_9, SW1_10, SW1_11, SW1_12, SW1_13, SW1_15, SW2_10, SW2_11 +35 |
| 7 | 100u/6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3, C6, C7, C13, C14, C19, C21 |
| 7 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.25u | SW5_1, SW5_2, SW5_3, SW5_10, SW5_12, SW5_15, SW5_17 |
| 7 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.50u | SW2_1, SW3_14, SW5_4, SW5_6, SW5_11, SW5_13, SW5_18 |
| 6 | MountingHole | MountingHole:MountingHole_3.2mm_M3_Pad_TopOnly | H1, H2, H3, H4, H5, H6 |
| 3 | 10K | Resistor_SMD:R_0603_1608Metric | R16, R17, R20 |
| 3 | 2.2u/6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C4, C5 |
| 3 | BAT54S | Package_TO_SOT_SMD:SOT-23 | D1, D2, D3 |
| 3 | no-fit | Resistor_SMD:R_0603_1608Metric | R4, R7, R8 |
| 2 | 0ohm | Resistor_SMD:R_0402_1005Metric | R12, R13 |
| 2 | 100n/6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C2, C15 |
| 2 | 100nF/16V | Capacitor_SMD:C_0603_1608Metric | C8, C9 |
| 2 | 15P/25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16, C17 |
| 2 | 1K | Resistor_SMD:R_0603_1608Metric | R11, R14 |
| 2 | 1uF/16V | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 22R/5% | Resistor_SMD:R_0603_1608Metric | R15, R18 |
| 2 | 5.1K | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.75u | SW3_1, SW4_15 |
| 2 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.25u | SW3_13, SW4_1 |
| 1 | 0.1u/6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C22 |
| 1 | 100K/1% | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 100R/5% | Resistor_SMD:R_0603_1608Metric | R24 |
| 1 | 100uF/16V | Capacitor_SMD:C_0603_1608Metric | C12 |
| 1 | 10K ~ 100K | Resistor_SMD:R_0603_1608Metric | R21 |
| 1 | 12MHz | Crystal:Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm | X1 |
| 1 | 150K/1% | Resistor_SMD:R_0603_1608Metric | R10 |
| 1 | 1N4148 | Diode_SMD:D_SOD-323 | D62 |
| 1 | 1R | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 200R | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 2U2/6.3V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C18 |
| 1 | 47nF/16V | Capacitor_SMD:C_0603_1608Metric | C20 |
| 1 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04_Socket | Connector_Molex:Molex_PicoBlade_53261-0571_1x05-1MP_P1.25mm_Horizontal | J3 |
| 1 | Conn_01x14_Socket | Connector_FFC-FPC:Molex_200528-0140_1x14-1MP_P1.00mm_Horizontal | J4 |
| 1 | ESD5Zxx | Diode_SMD:D_SOD-523 | D61 |
| 1 | GZ2012D601TF | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_TL3342 | SW1 |
| 1 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_7.00u | SW5_8 |
| 1 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.00u | SW1_14 |
| 1 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_6.25u | SW5_7 |
| 1 | SW_Push | Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_2.75u | SW4_13 |
| 1 | TLV75533PDBV | Package_TO_SOT_SMD:SOT-23-5 | U7 |
| 1 | TXS0108EPW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | Thermistor_NTC | Resistor_SMD:R_0603_1608Metric | TH1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | W25Q16JVSS | Package_SON:Winbond_USON-8-1EP_3x2mm_P0.5mm_EP0.2x1.6mm | U3 |
| 1 | ~ | Resistor_SMD:R_0603_1608Metric | R19 |
The 203 most common of 209 parts.
Similar boards
- 2 layers247 × 75.4 mm

- 2 layers102.5 × 199 mm

- 2 layers51 × 60.7 mm

- 4 layers240 × 180 mm

- 2 layers80 × 38.5 mm

Logic analyzer rp2040
pustowhite/rp2040-logic-analyzer
An 8-channel RP2040 logic analyzer PCB designed in KiCad, with USB-C and selectable 1.8 V / 3.3 V input logic modes.
66 parts - 2 layers87.2 × 59 mm

Reform2-trackball2
jackhumbert/reform
This is the main repository for the MNT Reform open source laptop.
67 parts1 - 4 layers299 × 127 mm

- 4 layers53 × 42 mm

MioLink
Misaka0x2730/MioLink
ARM JTAG/SWD debugger (BlackMagic port) based on RP2040.
117 parts30GPL-3.0
Questions
How big is the Goose60rev2 PCB?
It measures 285 × 95.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Goose60rev2 use?
209 parts, built around the RP2040, W25Q16JVSSIQ, TLV75533PDBV and TXS0108EPW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Goose60rev2 KiCad files?
From the yuhao-kuo/goose60 repository on GitHub, at the commit this page was made from: the board is hardware/goose60rev2/goose60rev2.kicad_pcb and its schematic hardware/goose60rev2/connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Goose60rev2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask yuhao-kuo before reusing the design.