
Funcdecoder tomix pcb 8919 rev0 panelize 94mm 97mm
ytsurui/dcc-funcdecoder-pcb-t8919d
NMRA DCC Decoder Circuit Diagram / PCB Design Data for TOMIX 8919

NMRA DCC Decoder Circuit Diagram / PCB Design Data for TOMIX 8919
Funcdecoder tomix pcb 8919 is an open-source printed circuit board by ytsurui, from the ytsurui/dcc-funcdecoder-pcb-t8919d repository on GitHub, published under the MIT licence. It is a 2-layer board of 17.5 × 14.5 mm with 24 parts on 17 nets, routed with 291 tracks and 14 vias.
It is built around the ATTINY45-20SU, 2N7002DW and 2SC4116. Its parts include 4 resistors, 4 diodes, 3 transistors, 3 connectors and 2 capacitors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
NMRA規格の信号を受信して動作する、ファンクション専用のDCCデコーダの基板設計データです。
TOMIX製Nゲージ鉄道模型に搭載されている、8919と刻印されている基板と交換してそのまま搭載可能な設計となっております。
回路図、基板設計データ、面付け済みの設計データを含みます。
面付け済みのデータについては、ガーバーデータも含みます。 (elecrowにて製造できることを確認済み)

| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 102 | footprint:R_1608 | R2, R3 |
| 2 | LED | footprint:LED_1224_SIDE | D3, D4 |
| 2 | RAIL | footprint:TOMIX_CONTACT_HOLE | J2, J3 |
| 1 | 103 | footprint:R_1608 | R1 |
| 1 | 104 | footprint:R_1608 | R4 |
| 1 | 104 | footprint:C_1005 | C1 |
| 1 | 12V | footprint:PAD_0.5x1.2_SMD | PAD3 |
| 1 | 12V | footprint:PAD_1.2x1.2_Hole0.7 | PAD1 |
| 1 | 226 | footprint:C_1608 | C2 |
| 1 | 2N7002DW | footprint:SOT-363-nomark | Q2 |
| 1 | 2SC4116 | footprint:SC-70 | Q1 |
| 1 | 5.1V | footprint:UMD2 | D2 |
| 1 | ATtiny45-20SU | footprint:TSSOP-8 | U1 |
| 1 | BAS3007 | footprint:SOT-143 | D1 |
| 1 | DIR | footprint:SOLDER_CONN_PAD_1.5mm | PAD5 |
| 1 | FX2 | footprint:PAD_1.2x0.8_SMD | PAD4 |
| 1 | GND | footprint:PAD_1.2x1.2_Hole0.7 | PAD2 |
| 1 | HOLE_1.2mm | footprint:HOLE_1.2mm | H** |
| 1 | HOLE_3.5mm | footprint:HOLE_3.5mm | H** |
| 1 | PROG | footprint:PAD_PROG_6PIN_HOLE0.6 | J1 |
| 1 | SSM3K7002BFU | footprint:SC-70 | Q3 |

ytsurui/dcc-funcdecoder-pcb-t8919d
NMRA DCC Decoder Circuit Diagram / PCB Design Data for TOMIX 8919

ytsurui/dcc-funcdecoder-pcb-t0507d
NMRA DCC Decoder Circuit Diagram / PCB Design Data for TOMIX 0507/0773


Moryu-Io/Roboken-FMSKF-robot-controller
docker pull microros/microrosstaticlibrarybuilder:foxy docker run -it --rm -v $(pwd):/project --env MICROROSLIBRARYFOLDER=extras microros/microrosstaticlibrarybuilder:foxy -p teensy4 ※2022/05/08…

UzixLS/mist1010-board
10x10cm PCB variant of MIST FPGA project for G738/G706 enclosure

Petezah/roomba_wall_v2
An AVR program for ATTiny85 to transmit a virtual wall signal for an iRobot Roomba



It measures 17.5 × 14.5 mm and has 2 copper layers, 0.6 mm thick.
24 parts, built around the ATTINY45-20SU, 2N7002DW and 2SC4116. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the ytsurui/dcc-funcdecoder-pcb-t8919d repository on GitHub, at the commit this page was made from: the board is KiCad/funcdecoder_tomix_pcb_8919.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).