Skip to the content
2 layersPcb2-3, the printed circuit board in 3D

NeoPixel Library for Raspberry Pi and Python

Copper layers
2
Thickness
1.6 mm
Parts
11
Nets
16
Pads
35
Tracks, vias
39, 1
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
1 Sep 2021
Updated
13 Jun 2025

Overview

Pcb2-3 is an open-source printed circuit board by ytani01, from the ytani01/Ytani_NeoPixel repository on GitHub, published under the MIT licence. It is a 2-layer board with 11 parts on 16 nets, routed with 39 tracks and 1 via.

It is built around the ATTINY85-20SU and ATTINY85-15M. Its parts include 2 switches, 1 resistor, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

Ytani NeoPixel Library

1. for Python3 on Raspberry Pi

rpi-python3/

2. for C++ on Arduino, ESP32, ATTiny etc..

arduino-etc/

2.0 !! 重要 !!

  • NeoPixelライブラリの実行で、割り込みが効かなくなる show()の直後に、interrupts() または sei()をすること!
  • ATTiny85のメモリ(RAM)不足で、挙動がおかしくなる。

Parts

11
QtyValueFootprintReferences
110KM3216_334R1
1ATTINY85ATTINY85-20SURATTINY85-1
1ATtiny85-20SPackage_SO:SOIC-8_5.3x5.3mm_P1.27mmU1
1LED1PINHEAD-MA03-1_30941153LED0
1LOGO-YTLOGO-YT1LOGO1
1PIN-APINHEAD-MA03-1SV1
1PIN-BPINHEAD-MA03-1SV2
1POWERSW3-1_30941153SW2
1bat+PINHEAD-MA03-1SW1
1bat+PINHEAD-MA01-1_30941153BAT+0
1bat-PINHEAD-MA01-1_30941153BAT-0

Similar boards

  • 2 layers50 × 50 mmT85-with driver and poe, the printed circuit board in 3D

    T85-with driver and poe

    cnlohr/ethertiny

    A firmware-only half-duplex 10Base-T implementation for AVRs

    41 parts133
  • 2 layers23 × 45 mmCell monitor, the printed circuit board in 3D

    Cell monitor

    scttnlsn/cell-monitor

    Battery cell monitor and balancer

    13 parts39MIT
  • 2 layers41.1 × 110.7 mmJNTUB, the printed circuit board in 3D

    JNTUB

    joyfulnoisesynth/JNTUB

    JoyfulNoise Tiny Utility Board

    84 parts26
  • 2 layersCastVolumeKnob, the printed circuit board in 3D

    CastVolumeKnob

    WebmasterTD/CastVolumeKnob

    Hardware Volume Knob for Google Cast devices

    18 parts25
  • 2 layers40 × 30 mmTest board, the printed circuit board in 3D

    Test board

    Guiimartinho/routeai

    LLM-Powered Electronic Design Automation Platform for PCB Design

    4 parts13
  • 2 layers78.3 × 78.5 mm50x70 tiny, the printed circuit board in 3D

    50x70 tiny

    rallekralle11/Tinyreflow

    Inspired by afterearthltd's reflow plate, but using fewer and simpler components.

    23 parts10
  • 2 layersMIDIMonkey, the printed circuit board in 3D

    MIDIMonkey

    aleh/MIDIMonkey

    Listens to MIDI messages on one pin and triggers drums on the others

    8 parts9MIT
  • 2 layers46.9 × 41.4 mmGR PW Noise, the printed circuit board in 3D

    GR PW Noise

    GadgetReboot/White_Pink_Noise

    White noise and pink noise PCB

    40 parts7

Questions

What parts does the Pcb2-3 use?

11 parts, built around the ATTINY85-20SU and ATTINY85-15M. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Pcb2-3 KiCad files?

From the ytani01/Ytani_NeoPixel repository on GitHub, at the commit this page was made from: the board is ATTiny85/ATTiny85+CirleLEDs+CR2032/pcb/pcb2-KiCad/pcb2-3-KiCad/pcb2-3/pcb2-3.kicad_pcb and its schematic ATTiny85/ATTiny85+CirleLEDs+CR2032/pcb/pcb2-KiCad/pcb2-3-KiCad/pcb2-3/pcb2-3.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Pcb2-3 design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).