
Circuit AirSensor
Yona-W/OpeNITHM
Open-Source hardware Seaurchin/Qnithm/Laverita controller

Open-Source hardware Seaurchin/Qnithm/Laverita controller
OpeNITHM is an open-source printed circuit board by Yona-W, from the Yona-W/OpeNITHM repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 45.3 mm with 26 parts on 67 nets, routed with 599 tracks and 2 vias.
It is built around the 74HC4051. Its parts include 9 resistors, 6 connectors and 4 ICs.
I would recommend using the gerbers.zip file because I had to manually edit holes to be non-plated (Kicad did not like my footprints)
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | R_AIR | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R20, R21, R22, R23, R24, R25 |
| 4 | 74HC4051 | 74HC4051:74HC4051_Sparkfun_Aliexpress | U1, U2, U3, U4 |
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_ISO14580 | H1, H2, H3, H4 |
| 3 | 33 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R17, R18, R19 |
| 2 | Conn_01x14 | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J1, J2 |
| 2 | Conn_02x12_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x12_P2.54mm_Horizontal | J7, J8 |
| 2 | Logo | OpeNITHM:openithm-logo | LOGO1, LOGO2 |
| 1 | Conn_01x05 | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J9 |
| 1 | Conn_02x07_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Horizontal | J3 |
| 1 | SolderJumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1 |

Yona-W/OpeNITHM
Open-Source hardware Seaurchin/Qnithm/Laverita controller

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

eddyem/stm32samples
Code samples and ready projects based on bare-metal STM32



sporkus/le_capybara_keyboard
Capactive sensing (EC) pcb for Le Chiffre keyboard

ginjake/ec_helix_build
商用利用したい場合は twitter @sirojake にご相談ください please contact me for commercial use. ## developer ginjake


It measures 100 × 45.3 mm and has 2 copper layers, 1.6 mm thick.
26 parts, built around the 74HC4051. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Yona-W/OpeNITHM repository on GitHub, at the commit this page was made from: the board is PCB Files/Circuit-Teensy32/OpeNITHM.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).