Skip to the content
2 layers53.3 × 92.7 mmCamera Lens Optocoupler, the printed circuit board in 3D

Camera Lens Optocoupler

yeataro/LensRotaryDecoder1

Lens rotary decoder

Size
53.3 × 92.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
28
Nets
36
Pads
117
Tracks, vias
228, 0
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
21 Mar 2022
Updated
17 Feb 2022

Overview

Camera Lens Optocoupler is an open-source printed circuit board by yeataro, from the yeataro/LensRotaryDecoder repository on GitHub. It is a 2-layer board of 53.3 × 92.7 mm with 28 parts on 36 nets, routed with 228 tracks and 0 vias.

It is built around the HCPL2630M and 74AHC14D. Its parts include 12 resistors, 5 capacitors, 5 ICs and 2 connectors.

Main components

2

README

HW/MCU_NET_OLED/README.md

MCU version of rotary decoder

This version cover both cases:

  • Canon HJ14ex4.3B lens virtual output encoder
  • Standalone rotary encoders

Schematic

schematic

PCB

pcb

gerber file

Firmware

Hardcoded things

  • MAC address of this device is BA:DE:C0:DE:XX:00 where *XX is a unique hex value for that board
  • IP address of FreeD receiver is broadcast (255.255.255.255), destination port is 60000 + XX

Parts

28
QtyValueFootprintReferences
61kResistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR7, R8, R9, R10, R11, R12
6360Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_HorizontalR1, R2, R3, R4, R5, R6
5100nFCapacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mmC1, C2, C3, C4, C5
4MountingHoleMountingHole:MountingHole_3.2mm_M3H1, H2, H3, H4
3HCPL-2630Package_DIP:DIP-8_W7.62mmU3, U4, U5
274AHC14Package_DIP:DIP-14_W7.62mmU1, U2
1DB9_MaleConnector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mmJ1
1PBD-16RConnector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_HorizontalJ3

More from yeataro/LensRotaryDecoder

9
  • 2 layers117.5 × 90.8 mmMCU NET OLED, the printed circuit board in 3D

    MCU NET OLED

    yeataro/LensRotaryDecoder

    Lens rotary decoder

    42 parts1
  • 2 layers109.2 × 95.3 mmEZ USB motherboard, the printed circuit board in 3D

    EZ USB motherboard

    yeataro/LensRotaryDecoder

    Lens rotary decoder

    36 parts1
  • 2 layers87.6 × 27.9 mmTest Rotary Encoder, the printed circuit board in 3D

    Test Rotary Encoder

    yeataro/LensRotaryDecoder

    Lens rotary decoder

    14 parts1
  • 2 layers109.2 × 95.3 mmEpm570 hat ver full, the printed circuit board in 3D

    Epm570 hat ver full

    yeataro/LensRotaryDecoder

    Lens rotary decoder

    7 parts1
  • 2 layers95.3 × 95.3 mmEpm570 hat ver, the printed circuit board in 3D

    Epm570 hat ver

    yeataro/LensRotaryDecoder

    Lens rotary decoder

    7 parts1
  • 2 layers96.5 × 61 mmEpm570 hat hor, the printed circuit board in 3D

    Epm570 hat hor

    yeataro/LensRotaryDecoder

    Lens rotary decoder

    3 parts1
  • 2 layers53.3 × 39.4 mmMojo hat tiny, the printed circuit board in 3D

    Mojo hat tiny

    yeataro/LensRotaryDecoder

    Lens rotary decoder

    2 parts1

Similar boards

  • 2 layers56 × 110 mmTrs pcb, the printed circuit board in 3D

    Trs pcb

    Windfisch/midikraken

    A open source, open hardware up-to-16x USB-MIDI-interface for around 15 bucks in its smallest configuration.

    125 parts28
  • 4 layers157.5 × 130 mmJv thesis, the printed circuit board in 3D

    Jv thesis

    JhonVelasquez/Embedded_system_Synchronize_Plant

    Project of a embedded system that synchronizes signals in a plant. There is electronic (PCB) and software design (FreeRTOS for STM32F7).

    233 parts2
  • 2 layersNEOCERA jnr project, the printed circuit board in 3D

    NEOCERA jnr project

    tioluwanimofe/neocera-test-junior-project-2024_2025

    report for junior design project class

    151 parts
  • 4 layers102.9 × 96.7 mmPicoGUS chipdown, the printed circuit board in 3D

    PicoGUS chipdown

    polpo/picogus

    Emulation of ISA sound cards and CD-ROM on Raspberry Pi Pico (GUS, SB/Adlib, MPU-401, Tandy, CMS, Panasonic CD-ROM) with USB mouse/joystick support

    99 parts805
  • 4 layers56 × 87.8 mmPicogus104, the printed circuit board in 3D

    Picogus104

    UzixLS/picogus104

    PicoGUS sound card for PC/104 interface

    114 parts23
  • 2 layers65.6 × 41.4 mmPocket386, the printed circuit board in 3D

    Pocket386

    HeathenUK/Pico_Pocket386

    Pocket386 PicoGUS daughter board

    21 parts4
  • 2 layers96 × 48 mmDriver1, the printed circuit board in 3D

    Driver1

    salocin2662/tesla-coil

    Tesla coil design project

    91 parts
  • 2 layers65 × 56 mmButtonHat, the printed circuit board in 3D

    ButtonHat

    RobertPHeller/RPi-RRCircuits

    A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

    40 parts24

Questions

How big is the Camera Lens Optocoupler PCB?

It measures 53.3 × 92.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Camera Lens Optocoupler use?

28 parts, built around the HCPL2630M and 74AHC14D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Camera Lens Optocoupler KiCad files?

From the yeataro/LensRotaryDecoder repository on GitHub, at the commit this page was made from: the board is HW/Camera_Lens_Optocoupler/Camera_Lens_Optocoupler.kicad_pcb and its schematic HW/Camera_Lens_Cable/Camera_Lens_Cable.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Camera Lens Optocoupler design in my own project?

Its repository states no licence, so its author keeps all rights: ask yeataro before reusing the design.