

EIT Projekt 4 FS16
- Size
- 29 × 31 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 66
- Nets
- 71
- Pads
- 233
- Tracks, vias
- 592, 36
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Mar 2016
- Updated
- 8 Mar 2020
Overview
Sensor is an open-source printed circuit board by Yatekii, from the Yatekii/project-powerline repository on GitHub, published under the MIT licence. It is a 2-layer board of 29 × 31 mm with 66 parts on 71 nets, routed with 592 tracks and 36 vias.
It is built around the ZXGD3005E6TA, CD74HC4046AM and OPA376AIDCK, with the BUK9Y22-30B and DMP10H4D2S-7 among its other parts. Its parts include 17 capacitors, 11 resistors, 6 ICs, 2 diodes and 2 crystals. It belongs with the sensors and measurement boards of this library.
Main components
5ZXGD3005E6TA
SOT-26-55℃~+150℃ 1 25V 35ns 4A 50nA 6.4A 8ns 8ns IGBT、MOSFET Low Side SOT-26 Gate Drivers ROHSDiodes IncorporatedGate DriversCD74HC4046AM
SOIC-16-55℃~+125℃ 2V~6V 38MHz External SOIC-16 Clock Generators, PLLs, Frequency Synthesizers ROHSTexas InstrumentsClock Generators, PLLs, Frequency SynthesizersOPA376AIDCK
SC-70-5-2.75V~-1.1V、1.1V~2.75V -40℃~+125℃ 0.2pA 0.2pA 1 2.2V~5.5V 260nV/℃ 2V/us 30mA 5.5MHz 5uV 7.5nV/√Hz@1kHz 760uA 90dB ESD protection、Reverse-phase input protection Rail-to-Rail Input, Rail-to-Rail Output SC-70-5 Precision Op Amps ROHSTexas InstrumentsPrecision Op AmpsBUK9Y22-30B
SOT-669-55℃~+175℃ 1 N-channel 10.5nC@5V 102pF 13.5mΩ@10V 2V 30V 37.7A 59.4W 940pF SOT-669 MOSFETs ROHSNexperiaMOSFETsDMP10H4D2S-7
SOT-23-55℃~+150℃ 1 P-Channel 1.8nC@10V 100V 2.3V 2.8Ω@10V 2.9pF 270mA 440mW 5.6pF 87pF P-Channel SOT-23 MOSFETs ROHSDiodes IncorporatedMOSFETs
README
README.mdpowerline
EIT Projekt 4 FS16
Parts
66| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | R_Small | Resistors_SMD:R_0603 | JP3.1, JP3.2, JP3.3, R1, R5, R7, R8, R9, R10, R12, R13 |
| 7 | C_Small | Capacitors_SMD:C_0603 | C2, C3, C4, C7, C9, C10, C13 |
| 5 | 10k | Resistors_SMD:R_0603 | R_FB2, R6, R11, R15, R20 |
| 3 | 100k | Resistors_SMD:R_0603 | R2, R3, R24 |
| 3 | 100n | Capacitors_SMD:C_0603 | C14, C15, C16 |
| 2 | 0R | Resistors_SMD:R_0603 | R22, R23 |
| 2 | 100 | Resistors_SMD:R_0603 | R18, R19 |
| 2 | 33k | Resistors_SMD:R_0603 | R_FB1, R17 |
| 2 | CD74HC4046 | Housings_SSOP:TSSOP-16_4.4x5mm_Pitch0.65mm | U3, U4 |
| 2 | POT | pro4:EVM-1USX30B14 | RV1, RV2 |
| 1 | 0.1u | Capacitors_SMD:C_0603 | C5 |
| 1 | 100nF | Capacitors_SMD:C_0603 | C8 |
| 1 | 10uF | Capacitors_SMD:C_0603 | C11 |
| 1 | 1M8 | Resistors_SMD:R_0805 | R4 |
| 1 | 1k | Resistors_SMD:R_0603 | R21 |
| 1 | 1u | Capacitors_SMD:C_0603 | C6 |
| 1 | 1u | Capacitors_SMD:C_0805 | C17 |
| 1 | 2.2uF | Capacitors_SMD:C_0805 | C1 |
| 1 | 22uH | SMD_Packages:SMD-1210_Pol | L1 |
| 1 | 50k | Resistors_SMD:R_0603 | R14 |
| 1 | 600k | Resistors_SMD:R_0805 | R16 |
| 1 | 60V | Pin_Headers:Pin_Header_Angled_1x02 | X1 |
| 1 | Atmel_SAM_D09 | Housings_DFN_QFN:QFN-24-1EP_4x4mm_Pitch0.5mm | U5 |
| 1 | BLUE | LEDs:LED-0603 | D_BLUE1 |
| 1 | BUK9Y22 | TO_SOT_Packages_SMD:SOT-669_LFPAK | T1 |
| 1 | CONN_01X05 | Connectors_Molex:Connector_Molex_PicoBlade_53261-0571 | P1 |
| 1 | C_Small | Capacitors_SMD:C_0805 | C12 |
| 1 | Cstm | Buttons_Switches_SMD:SW_SPST_PTS645 | SW_CSTM1 |
| 1 | DMP10H4D2s | TO_SOT_Packages_SMD:SOT-23 | T2 |
| 1 | D_Schottky_Small | Diodes_SMD:SOD-123 | D1 |
| 1 | LMR16006 | TO_SOT_Packages_SMD:TSOT-6-MK06A | U1 |
| 1 | OPA376AIDCK | TO_SOT_Packages_SMD:SC-70-6 | U2 |
| 1 | RED | LEDs:LED-0603 | D_RED1 |
| 1 | Reset | Buttons_Switches_SMD:SW_SPST_PTS645 | SW1 |
| 1 | UART | Connectors_Molex:Connector_Molex_PicoBlade_53261-0471 | X2 |
| 1 | ZENER | Diodes_SMD:SOD-323 | D2 |
| 1 | ZXGD3005E6_ | TO_SOT_Packages_SMD:SOT-23-6 | U6 |
More from Yatekii/project-powerline
2- 2 layers103.1 × 86.6 mm

- 2 layers25.7 × 45.5 mm

Similar boards
- 4 layers78.5 × 95 mm

- 2 layers134.6 × 109.2 mm

PacMan
Lafayette-FSAE/PacMan
A KiCad Schematic for PacMan, a Accumulator Management Board for the Lafayette FSAE Accumulator Management System
169 parts1 - 4 layers12.2 × 40.5 mm

- 4 layers120 × 100 mm

- 2 layers126.5 × 83 mm

Pcb pro controller
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
66 parts915 - 2 layers94.6 × 46.1 mm

- 2 layers56.9 × 35.2 mm

- 2 layers82 × 120 mm

Sample Numeric Keyboard
famichu/MagLev_Switch_MX
The 3D printable magnetic levitation contactless switch with the linear output hall effect sensor.
66 parts467
Questions
How big is the Sensor PCB?
It measures 29 × 31 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Sensor use?
66 parts, built around the ZXGD3005E6TA, CD74HC4046AM, OPA376AIDCK and BUK9Y22-30B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Sensor KiCad files?
From the Yatekii/project-powerline repository on GitHub, at the commit this page was made from: the board is hardware/pcb_backup/sensor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Sensor design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).