Skip to the content
2 layers40.1 × 15.7 mmProject 3 TP4056 module, the printed circuit board in 3D

Project 3 TP4056 module

yash-workspace/PCB-Projects

In this repo there is detailed PCB projects I made with proper files and notes.

Size
40.1 × 15.7 mm
Copper layers
2
Thickness
1.6 mm
Parts
20
Nets
25
Pads
68
Tracks, vias
83, 3
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
25 May 2026
Updated
1 Aug 2026

Overview

Project 3 TP4056 module is an open-source printed circuit board by yash-workspace, from the yash-workspace/PCB-Projects repository on GitHub. It is a 2-layer board of 40.1 × 15.7 mm with 20 parts on 25 nets, routed with 83 tracks and 3 vias.

It is built around the DW01A and TP4056. Its parts include 7 connectors, 5 resistors, 3 capacitors, 3 ICs and 2 diodes.

Main components

2

README

README.md

My PCB Design Journey

Welcome! This repository is a living document of my hands-on journey into the world of PCB design and practical electronics using KiCad.

For me, this isn't just about connecting dots on a screen or getting an LED to blink. It’s about deeply understanding what happens beneath the surface—mastering current flow, grounding, return paths, routing strategies, and designing for actual manufacturability.

Instead of blindly copying tutorial schematics, I build these projects from the ground up using datasheets, engineering research, messy experimentation, and iterative redesigns based on real-world feedback.


The Toolkit

  • Design: KiCad 10
  • Version Control: Git & GitHub (because breaking things is part of the process)
  • Validation: Rigorous DRC/ERC workflows
  • Knowledge Base: Deep-dives into datasheets & community code reviews

Repository Structure

text
PCB-Projects/
│
├── Project_01_LED_Driver/   # My gateway project (Transistor-based)
│
├── Project_02_...          # Incoming designs...
│
└── Future Projects/         # The roadmap

The Projects

Project 01 - LED Driver PCB (V2)

Project 02 - ESP32 LED Strip Driver

Project 03 - TP4056_Module

Project Status

Actively building, breaking, and iterating. Feel free to look around, check out the schematics, or drop some feedback if you see room for improvement!

Parts

20
QtyValueFootprintReferences
31kResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR2, R3, R4
210uFCapacitor_SMD:C_0603_1608MetricC1, C2
2LEDLED_SMD:LED_0201_0603MetricD1, D2
10.1uFCapacitor_SMD:C_0603_1608MetricC3
1100RResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR5
11k2Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1
1Bat+Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mmJ1
1Bat-Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mmJ2
1DW01APackage_TO_SOT_SMD:SOT-23-6U2
1GNDConnector_Wire:SolderWirePad_1x01_SMD_1.5x3mmJ4
1OUT+Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mmJ6
1OUT-Connector_Wire:SolderWirePad_1x01_SMD_1.5x3mmJ5
1TP4056Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mmU1
1USB_B_MicroConnector_USB:USB_Micro-B_Molex_47346-0001J7
1VinConnector_Wire:SolderWirePad_1x01_SMD_1.5x3mmJ3
1~Package_SO:TSSOP-8_4.4x3mm_P0.65mmU3

More from yash-workspace/PCB-Projects

2
  • 2 layers112 × 47 mmESP32 - LED Strip Driver, the printed circuit board in 3D

    ESP32 - LED Strip Driver

    yash-workspace/PCB-Projects

    In this repo there is detailed PCB projects I made with proper files and notes.

    29 parts
  • 2 layers35 × 40 mmLED Driver V2, the printed circuit board in 3D

    LED Driver V2

    yash-workspace/PCB-Projects

    In this repo there is detailed PCB projects I made with proper files and notes.

    10 parts

Similar boards

  • 2 layers192.4 × 50 mmOmote, the printed circuit board in 3D

    Omote

    OMOTE-Community/OMOTE-Hardware

    Open Source Remote - Hardware

    187 parts157GPL-3.0
  • 2 layers230 × 85 mmLe chiff ble hotswap, the printed circuit board in 3D

    Le chiff ble hotswap

    MangoIV/le_chiff_ble

    A drop-in replacement-PCB for the beautiful le_chiffre

    117 parts52GPL-3.0
  • 2 layers79 × 30 mmLIA, the printed circuit board in 3D

    LIA

    JGAguado/LIA

    Low-power pet tracking platform built around Meshtastic and LoRa mesh networking

    81 parts29
  • 2 layers52.5 × 28 mmKitchen timer, the printed circuit board in 3D

    Kitchen timer

    hggh/kitchen-timer

    kitchen timer

    35 parts16GPL-3.0
  • 2 layers100 × 90 mmAudMix, the printed circuit board in 3D

    AudMix

    I-AM-ENGINEER/AudMX

    Alternative for Deej ( https://github.com/omriharel/deej ) with more features

    85 parts12
  • 2 layers190 × 75 mmAVT2022 Badge Final, the printed circuit board in 3D

    AVT2022 Badge Final

    epremeaux/AVTokyo_2022_Badge

    AVTokyo 2022 event badge PCB, firmware and server code.

    72 parts9
  • 4 layers53 × 33 mmLiPo BuckBoost Charger, the printed circuit board in 3D

    LiPo BuckBoost Charger

    potpurri/LiPo_Charger_TP4056_BuckBoost_TPS63020

    This PCB is designed to safely charge a lithium-ion cell and provide a selectable 3.3V or 5V output. It's equipped with components that ensure safe charging and protection for the battery and supports flexible output…

    63 parts9Apache-2.0
  • 2 layers35 × 100 mmWalkieTalkie, the printed circuit board in 3D

    WalkieTalkie

    GuzziFlipFlops/ESP32-Walkie-Talkie

    An open source ESPNOW based walkie talkie with a 600 meter tested distance, with an OLED and multiple buttons to interact with

    66 parts7MIT

Questions

How big is the Project 3 TP4056 module PCB?

It measures 40.1 × 15.7 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Project 3 TP4056 module use?

20 parts, built around the DW01A and TP4056. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project 3 TP4056 module KiCad files?

From the yash-workspace/PCB-Projects repository on GitHub, at the commit this page was made from: the board is Project_3_TP4056_module/PCB/Project_3_TP4056_module.kicad_pcb and its schematic Project_01_LED_Driver/schematic/LED_Driver_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project 3 TP4056 module design in my own project?

Its repository states no licence, so its author keeps all rights: ask yash-workspace before reusing the design.