Skip to the content
2 layers35 × 40 mmLED Driver V2, the printed circuit board in 3D

In this repo there is detailed PCB projects I made with proper files and notes.

Size
35 × 40 mm
Copper layers
2
Thickness
1.6 mm
Parts
10
Nets
6
Pads
17
Tracks, vias
15, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
25 May 2026
Updated
1 Aug 2026

Overview

LED Driver V2 is an open-source printed circuit board by yash-workspace, from the yash-workspace/PCB-Projects repository on GitHub. It is a 2-layer board of 35 × 40 mm with 10 parts on 6 nets, routed with 15 tracks and 0 vias.

It is built around the PN2222A. Its parts include 2 resistors, 1 diode, 1 transistor, 1 connector and 1 switch.

Main components

1

README

README.md

My PCB Design Journey

Welcome! This repository is a living document of my hands-on journey into the world of PCB design and practical electronics using KiCad.

For me, this isn't just about connecting dots on a screen or getting an LED to blink. It’s about deeply understanding what happens beneath the surface—mastering current flow, grounding, return paths, routing strategies, and designing for actual manufacturability.

Instead of blindly copying tutorial schematics, I build these projects from the ground up using datasheets, engineering research, messy experimentation, and iterative redesigns based on real-world feedback.


The Toolkit

  • Design: KiCad 10
  • Version Control: Git & GitHub (because breaking things is part of the process)
  • Validation: Rigorous DRC/ERC workflows
  • Knowledge Base: Deep-dives into datasheets & community code reviews

Repository Structure

text
PCB-Projects/
│
├── Project_01_LED_Driver/   # My gateway project (Transistor-based)
│
├── Project_02_...          # Incoming designs...
│
└── Future Projects/         # The roadmap

The Projects

Project 01 - LED Driver PCB (V2)

Project 02 - ESP32 LED Strip Driver

Project 03 - TP4056_Module

Project Status

Actively building, breaking, and iterating. Feel free to look around, check out the schematics, or drop some feedback if you see room for improvement!

Parts

10
QtyValueFootprintReferences
1560RResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR4
15K6Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR6
1Conn_01x02_PinConnector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_VerticalJ2
1LED_RLED_THT:LED_D5.0mmD2
1PN2222APackage_TO_SOT_THT:TO-92_Inline_WideQ2
1~Button_Switch_THT:SW_CW_GPTS203211BSW2

The 6 most common of 10 parts.

More from yash-workspace/PCB-Projects

2
  • 2 layers112 × 47 mmESP32 - LED Strip Driver, the printed circuit board in 3D

    ESP32 - LED Strip Driver

    yash-workspace/PCB-Projects

    In this repo there is detailed PCB projects I made with proper files and notes.

    29 parts
  • 2 layers40.1 × 15.7 mmProject 3 TP4056 module, the printed circuit board in 3D

    Project 3 TP4056 module

    yash-workspace/PCB-Projects

    In this repo there is detailed PCB projects I made with proper files and notes.

    20 parts

Similar boards

  • 2 layers152.4 × 101.6 mm8088-FE2010A SBC, the printed circuit board in 3D

    8088-FE2010A SBC

    skiselev/micro_8088

    Micro 8088 - IBM XT Compatible Processor Board based on Faraday FE2010 chipset

    72 parts412GPL-3.0
  • 2 layers33.7 × 66 mmSmartbell, the printed circuit board in 3D

    Smartbell

    Staacks/there.oughta.be

    Projects featured on my blog at https://there.oughta.be

    27 parts108GPL-3.0
  • 4 layers100 × 100 mm2063-Z80, the printed circuit board in 3D

    2063-Z80

    Z80-Retro/2063-Z80

    Retro Z80 CPU Board

    86 parts96
  • 2 layers30.7 × 76.1 mmRepeater v2, the printed circuit board in 3D

    Repeater v2

    plusvic/simplebus2-intercom

    General description of the Simplebus2 protocol used by some Comelit's intercoms. Hardware for retransmitting Simplebus2 messages over UART.

    17 parts95CC0-1.0
  • 2 layers28.8 × 43.8 mmAdv pcb, the printed circuit board in 3D

    Adv pcb

    Vail-CW/vail-adapter

    Adapter for cw morse keys to USB

    13 parts81MIT
  • 2 layers23.2 × 52.1 mmOpenC64Saver, the printed circuit board in 3D

    OpenC64Saver

    SukkoPera/OpenC64Saver

    Protect your Commodore 64 from killer power supplies!

    17 parts79
  • 4 layers184.2 × 169.5 mmSB mini II, the printed circuit board in 3D

    SB mini II

    simonboak/SB-mini-II

    A homebrewed Apple II clone

    97 parts76MIT
  • 2 layers49.5 × 30 mmAirpcb smd old, the printed circuit board in 3D

    Airpcb smd old

    issalig/toshiba_air_cond

    AB protocol decoder for toshiba air conditioners

    30 parts65

Questions

How big is the LED Driver V2 PCB?

It measures 35 × 40 mm and has 2 copper layers, 1.6 mm thick.

What parts does the LED Driver V2 use?

10 parts, built around the PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the LED Driver V2 KiCad files?

From the yash-workspace/PCB-Projects repository on GitHub, at the commit this page was made from: the board is Project_01_LED_Driver/LED_Driver_V2/LED_Driver_V2.kicad_pcb and its schematic Project_01_LED_Driver/schematic/LED_Driver_V2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the LED Driver V2 design in my own project?

Its repository states no licence, so its author keeps all rights: ask yash-workspace before reusing the design.