

Mono Stumm Modul
- Size
- 68.5 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 32
- Nets
- 27
- Pads
- 89
- Tracks, vias
- 142, 7
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 May 2022
- Updated
- 14 Aug 2024
Overview
Mono Stumm Modul is an open-source printed circuit board by yannickbock, from the yannickbock/saba repository on GitHub. It is a 2-layer board of 68.5 × 70 mm with 32 parts on 27 nets, routed with 142 tracks and 7 vias.
It is built around the TDA1028, BC557 and BC547. Its parts include 15 resistors, 5 capacitors, 4 diodes, 4 connectors and 1 IC.
Main components
3TDA1028
TO-220B-9LAutomatic mute/no-noise switch、Enable/shutdown function、ESD protection TO-220B-9L Audio Amplifiers ROHSYWAudio AmplifiersBC557
TO-921 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)
Parts
32| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R702, R707, R708, R727, R728 |
| 4 | 6.8k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R716, R717, R724, R726 |
| 3 | 1N4148 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D702, D703, D704 |
| 2 | 12k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R722, R723 |
| 2 | 2.2µ | Capacitor_THT:C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 | C713, C714 |
| 2 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R706, R711 |
| 2 | BC557 | Package_TO_SOT_THT:TO-92_Wide | T703, T707 |
| 2 | Conn_01x01 | TestPoint:TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded | J2, J3 |
| 1 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R703 |
| 1 | 150k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R704 |
| 1 | 2.2n | Capacitor_THT:C_Rect_L10.0mm_W2.5mm_P7.50mm_MKS4 | C702 |
| 1 | 2.2µF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C711 |
| 1 | 4.7k | Potentiometer_THT:Potentiometer_Piher_PT-10-H01_Horizontal | P723 |
| 1 | 47µF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C708 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Wide | T727 |
| 1 | BZ102/1V4 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D727 |
| 1 | Conn_01x13 | NF-Filter-Modul:Connector_01x11_5mm | J1 |
| 1 | TDA1028 | Package_DIP:DIP-16_W7.62mm | U721 |
More from yannickbock/saba
12- 2 layers252 × 267.5 mm

- 2 layers252 × 172.5 mm

- 2 layers137 × 102 mm

- 2 layers95 × 70 mm

- 2 layers195 × 95 mm

- 2 layers95 × 60 mm

- 2 layers275 × 98 mm
%2B9241/hardware/Skalen-Beleuchtung.kicad_pcb.jpg?size=s&soon)
- 2 layers137 × 102 mm

- 2 layers95 × 60 mm

- 2 layers155 × 47.5 mm

- 2 layers95 × 60 mm

- 2 layers80 × 70 mm

Similar boards
- 2 layers56 × 65 mm

SeaTalk1
dotnet/iot
This repo includes .NET Core implementations for various IoT boards, chips, displays and PCBs.
24 parts2.4kMIT - 2 layers148.8 × 132.2 mm

Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers83.8 × 72.4 mm

- 2 layers13 × 0.5 mm

- 2 layers167.8 × 200.6 mm

Random Jazz Generator
telec16/modular-synth
Little side project, don't expect much updates.
132 parts16 - 2 layers100 × 100 mm

WhiteBoy
nodep/NovaBox
Circuit and PCB design of simple Bluetooth stereo receiver and amplifier
111 parts11GPL-3.0 - 2 layers53 × 55.1 mm

- 2 layers135.8 × 128.4 mm

Questions
How big is the Mono Stumm Modul PCB?
It measures 68.5 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Mono Stumm Modul use?
32 parts, built around the TDA1028, BC557 and BC547. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Mono Stumm Modul KiCad files?
From the yannickbock/saba repository on GitHub, at the commit this page was made from: the board is Module/Mono-Stumm-Modul/Mono-Stumm-Modul.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Mono Stumm Modul design in my own project?
Its repository states no licence, so its author keeps all rights: ask yannickbock before reusing the design.