2 layers252 × 267.5 mm
2 layers68.5 × 70 mm
Impuls Modul
yannickbock/saba- Size
- 68.5 × 70 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 26
- Nets
- 20
- Pads
- 67
- Tracks, vias
- 93, 1
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 13 May 2022
- Updated
- 14 Aug 2024
Overview
Impuls Modul is an open-source printed circuit board by yannickbock, from the yannickbock/saba repository on GitHub. It is a 2-layer board of 68.5 × 70 mm with 26 parts on 20 nets, routed with 93 tracks and 1 via.
It is built around the BC557, BC547 and BC327, with the ZPD8.2 among its other parts. Its parts include 15 resistors, 3 capacitors, 1 diode and 1 connector.
Main components
4
BC557
TO-921 PNP 100mA 100nA 150MHz 45V 500mW 6V 800 90mV、250mV PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)BC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)BC327
TO-921 PNP 100MHz 45V 5V 625mW 630 700mV 800mA PNP TO-92 Bipolar (BJT) ROHSDDFBipolar (BJT)ZPD8.2
DO-35-50℃~+175℃ 1 Independent 100nA@6V 500mW 7.7V~8.7V 8.2V ±5% DO-35 Zener Diodes ROHSDIOTECZener Diodes
Parts
26| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 22k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R771, R773, R774, R776, R778, R781, R786, R794 |
| 4 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R772, R777, R782, R793 |
| 3 | BC557 | Package_TO_SOT_THT:TO-92_Wide | T772, T777, T788 |
| 2 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R788, R791 |
| 2 | BC547 | Package_TO_SOT_THT:TO-92_Wide | T774, T781 |
| 1 | 100nF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C784 |
| 1 | 100µF | Capacitor_THT:CP_Radial_D6.3mm_P2.50mm | C772 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R787 |
| 1 | 47nF | Capacitor_THT:C_Rect_L7.0mm_W2.0mm_P5.00mm | C797 |
| 1 | BC327 | Package_TO_SOT_THT:TO-92_Wide | T792 |
| 1 | Conn_01x13 | Relais-Modul:Connector_01x11_5mm | J1 |
| 1 | ZPD8.2 | Diode_THT:D_DO-35_SOD27_P10.16mm_Horizontal | D794 |
Questions
How big is the Impuls Modul PCB?
It measures 68.5 × 70 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Impuls Modul use?
26 parts, built around the BC557, BC547, BC327 and ZPD8.2. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Impuls Modul KiCad files?
From the yannickbock/saba repository on GitHub, at the commit this page was made from: the board is Module/Impuls-Modul/Impuls-Modul.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Impuls Modul design in my own project?
Its repository states no licence, so its author keeps all rights: ask yannickbock before reusing the design.
More from yannickbock/saba
12- 2 layers252 × 172.5 mm
- 2 layers137 × 102 mm
- 2 layers95 × 70 mm
- 2 layers195 × 95 mm
- 2 layers95 × 60 mm
- 2 layers275 × 98 mm
- 2 layers137 × 102 mm
- 2 layers95 × 60 mm
- 2 layers155 × 47.5 mm
- 2 layers95 × 60 mm
- 2 layers80 × 70 mm
Similar boards
- 2 layers148.8 × 132.2 mm
Usbflashprog
robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.
125 parts36 - 2 layers83.8 × 72.4 mm
- 2 layers310 × 260 mm
- 2 layers42.5 × 64.1 mm
- 2 layers160 × 100 mm
Kneipp thermometer
MartinFeichtinger/kneippometer
This is a project to build an self-sufficient temperatur display for the local kneipp bath
140 parts - 2 layers47 × 49.5 mm
- 2 layers
- 2 layers153.5 × 53 mm
