
DroidVR PCB
xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.

A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
ProDroidVR PCB is an open-source printed circuit board by xxdamlaxx, from the xxdamlaxx/DroidVR repository on GitHub. It is a 4-layer board of 30 × 100 mm with 64 parts on 65 nets, routed with 602 tracks and 146 vias.
It is built around the AMS1117-3.3, 100UF 10V and SS34. Its parts include 22 resistors, 17 capacitors, 13 connectors, 3 ICs and 2 diodes. It belongs with the STM32 boards of this library.
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.
DroidVR is available under a dual license model. Pick whichever fits your use case.
Use, modify, distribute, and sell DroidVR for free, as long as you provide clear and visible attribution in your project's documentation, about page, and repository.
Required attribution:
Built with DroidVR by xxdamlaxx
See LICENSE.md for full terms.
If you prefer not to include attribution, you can purchase a commercial license:
| Tier | Monthly Fee |
|---|---|
| Public / Open-Source Development | $500 / month |
| Private / Closed-Source Development | $5,000 / month |
See LICENSE-COMMERCIAL.md for full terms.
For commercial licensing inquiries, reach out via GitHub or email (coming soon).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | R_0805 33ohm | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R17, R18, R19, R20, R21, R22, R23, R24, R36 |
| 6 | R_0805 4.7K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R30, R31, R32, R33, R34, R35 |
| 5 | C_0603 100nF | PCM_Capacitor_SMD_AKL:C_0603_1608Metric | C11, C12, C13, C14, C15 |
| 5 | C_0805 100nF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C16, C17, C18, C20, C21 |
| 5 | PINHD_1x1_Male | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J11, J12, J14, J15, J16 |
| 3 | MountingHole_M3 | MountingHole:MountingHole_3.2mm_M3 | H1, H3, H4 |
| 3 | R_0805 10K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R11, R12, R29 |
| 3 | R_0805 330ohm | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R25, R26, R27 |
| 2 | C_0603 20pF | PCM_Capacitor_SMD_AKL:C_0603_1608Metric | C9, C10 |
| 2 | PINHD_1x3_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | pot/switch1, pot/switch2 |
| 1 | 100uF_10V | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C6 |
| 1 | 120Ω @ 100MHz 0805 | PCM_Resistor_SMD_AKL:R_0805_2012Metric | FB1 |
| 1 | 1uF_50V | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C5 |
| 1 | 470uF_16V | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C3 |
| 1 | 47uF_10V | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C7 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Battery Holder - | TestPoint:TestPoint_THTPad_2.0x2.0mm_Drill1.0mm | J4 |
| 1 | C_0805 10nF | PCM_Capacitor_SMD_AKL:C_0805_2012Metric | C19 |
| 1 | Crystal_8MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | LED_3mm | LED_THT:LED_D3.0mm | D2 |
| 1 | Led Header | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5 |
| 1 | MPU6500 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | NRF24L01_Breakout | RF_Module:nRF24L01_Breakout | U1 |
| 1 | PINHD_1x2_Female | Battery:BatteryHolder_MPD_BH-18650-PC2 | J8 |
| 1 | PINHD_1x2_Female | Battery:BatteryHolder_MYOUNG_BS-07-A1BJ001_CR2032 | J1 |
| 1 | PINHD_1x5_Female | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J2 |
| 1 | PINHD_1x5_Male | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | PINHD_1x9_Male | Connector_PinHeader_2.54mm:PinHeader_1x09_P2.54mm_Vertical | J7 |
| 1 | R_0805 1K | PCM_Resistor_SMD_AKL:R_0805_2012Metric | R28 |
| 1 | SS34 | PCM_Diode_SMD_AKL:D_SMC | D1 |
| 1 | STM32F103C8Tx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U4 |

xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.

xxdamlaxx/DroidVR
A DIY VR controller ecosystem — open-source hardware and firmware for SteamVR-compatible motion controllers.



Sid93/levram-biometric-attendance-scanner
ESP32-S3 face-recognition factory attendance terminal — firmware, KiCad PCB, OpenSCAD enclosure, BOM

8aChristian/InduLink-485
The board follows rigorous IPC (IPC-2152, IPC-2221, IPC-7351) standards, complete with galvanic isolation, industrial transient protection (TVS, Schottky, PTC Polyfuse), a wide-input step-down switching power…
Abdullah-Atif/gsm-gps-tracker
Live vehicle tracker: ESP32 / ESP32-C3 + NEO-M8N GPS + SIM800L (2G) -> MQTT -> live web map. Firmware, KiCad PCBs, wiring diagram.

pavan-firmware/EH-Master-Repo
This directory contains the KiCad Schematic and PCB Design Project for the EH Smart Switch (3X / 4X Channel with BL0942 Metering).

purpletue/TinyLilFella
An absolutely microscopic (metaphorically) microcontroller board based on an STM32C071. The name is fully deserved.

salvogendut/reverseMX4
An extension board for the Amstrad CPC which uses edge connectors instead of IDC ones
It measures 30 × 100 mm and has 4 copper layers, 1.6 mm thick.
64 parts, built around the AMS1117-3.3, 100UF 10V and SS34. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the xxdamlaxx/DroidVR repository on GitHub, at the commit this page was made from: the board is DroidVR_PCB/ProDroidVR-PCB/ProDroidVR-PCB.kicad_pcb and its schematic DroidVR_PCB/ArduinoProMicro.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask xxdamlaxx before reusing the design.