
Gruzik2.0
NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition

XLR8V2 is an open-source printed circuit board by XLR8-Team, from the XLR8-Team/XLR8V2 repository on GitHub. It is a 2-layer board of 120 × 200 mm with 20 parts on 48 nets, routed with 280 tracks and 40 vias.
It is built around the HC-05. Its parts include 6 ICs, 4 connectors, 3 resistors, 3 switches and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 220 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3 |
| 2 | LED | LED_THT:LED_D3.0mm | D1, D2 |
| 2 | SW_DPDT_x2 | Button_Switch_THT:SW_CuK_OS102011MA1QN1_SPDT_Angled | SW2, SW3 |
| 2 | Screw_Terminal_01x02 | TerminalBlock:TerminalBlock_bornier-2_P5.08mm | J1, J2 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano_WithMountingHoles | A1 |
| 1 | ESC_IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | ESC_SIGNALS | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U4 |
| 1 | HC-05 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | U3 |
| 1 | LIPO 2S | Connector_AMASS:AMASS_XT30U-M_1x02_P5.0mm_Vertical | J3 |
| 1 | LOGO | XLR8_V2:LOGO_V2 | G*** |
| 1 | M_ARRANQUE | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | U1 |
| 1 | QTR-8A | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | U6 |
| 1 | SW_Push_Dual | Button_Switch_THT:SW_PUSH_6mm | SW1 |
| 1 | TB6612FNG | XLR8_V2:TB6612FNG | U2 |
| 1 | XL4015 DC-DC | XL4015_converter:XL4015_Converter | U5 |

NYDEREK/LineFollower_GRUZIK2.0-light
GRUZIK2.0 is simple light construction made for "line follower light" competition


duongngochoan/Self_balancing_robot_PID
Used a PID control algorithm and MPU605 sensor to balance a two-wheeled robot.

leikoilja/muscle-imbalance-detection
A device to assist patients with the rehabilitation of the knee joint after a knee surgery using EMG biofeedback. The device can reliably detect muscle activity and display it in an easy-to-use mobile application.

xtarke/automated_buggy
This shield connects microcontroller (MSP-EXP430FR2355) pins to the car's power board. Go to Power Board for more hardware information.



It measures 120 × 200 mm and has 2 copper layers, 0.8 mm thick.
20 parts, built around the HC-05. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the XLR8-Team/XLR8V2 repository on GitHub, at the commit this page was made from: the board is XLR8_V2/XLR8_V2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask XLR8-Team before reusing the design.