

- Size
- 57.6 × 54.1 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 35
- Nets
- 57
- Pads
- 185
- Tracks, vias
- 210, 9
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 20 Jan 2024
- Updated
- 10 Jul 2024
Overview
BPN is an open-source printed circuit board by Xingzhou-Chen, from the Xingzhou-Chen/MT repository on GitHub. It is a 2-layer board of 57.6 × 54.1 mm with 35 parts on 57 nets, routed with 210 tracks and 9 vias.
It is built around the NJM2904D, LM317 and 2N2222A, with the IRLIZ44N among its other parts. Its parts include 15 resistors, 6 capacitors, 4 ICs, 4 diodes and 4 connectors. It belongs with the RP2040 boards of this library.
Main components
4NJM2904D
DIP-8-40℃~+85℃ 1V/us 2 250nA 30mA 3V~32V 5nA 700uA 7mV 85dB Built-in compensation DIP-8 Operational Amplifier ROHSNisshinbo Micro Devices Inc.Operational AmplifierLM317
SOT-223-40℃~+85℃@(Ta) 0.003%Vout 1 1.3V~37V 1A 40V 80dB@(120Hz) Adjustable Positive Short Circuit Protection、Thermal shutdown SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSJSMSEMIVoltage Regulators - Linear, Low Drop Out (LDO) Regulators2N2222A
TO-92-55℃~+150℃ 1 NPN 100MHz 100nA 400 40V 5V 600mA 600mV 625mW NPN TO-92 Bipolar (BJT) ROHSSlkorBipolar (BJT)IRLIZ44N
TO-220-FP1 N-channel 1.7nF@25V 22mΩ@17A,10V 2V@250uA 30A 48nC@5V 55V TO-220-FP MOSFETsInfineon TechnologiesMOSFETs
Parts
35| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R14, R15 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R10, R11 |
| 3 | 1N4002 | Diode_THT:D_DO-41_SOD81_P3.81mm_Vertical_AnodeUp | D2, D3, D4 |
| 2 | 0.1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C6 |
| 2 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C5 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2 |
| 1 | 10 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | 2.52k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 240 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 2N2222A | Package_TO_SOT_THT:TO-92 | Q1 |
| 1 | 33k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 390 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | AMS6915 | MedVet_FP:AMS_6915_FP | U4 |
| 1 | IRLIZ44N | IRLZ44N:TO254P1054X469X1930-3 | Q2 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | LM317 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | NJM2904D | Package_DIP:DIP-8_W7.62mm_Socket | U3 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U2 |
| 1 | Pumpe | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Sensor_2 | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J4 |
| 1 | USB_C_Receptacle_PowerOnly_6P | Connector_USB:USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal | J1 |
| 1 | Valve | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
More from Xingzhou-Chen/MT
1- 2 layers95.9 × 58.9 mm

Similar boards
- 2 layers70 × 80 mm

- 4 layers95 × 54.4 mm

SmartVent AdvancedPCB
ishron256/TSI_SmartVent_KiCAD_May2026
This repository contains the KiCAD design documents for the TSI SmartVent project. All schematics, PCB layouts, libraries, and fabrication outputs are stored here and will be regularly updated.
48 parts - 2 layers

Led kitchen light controller
mattwach/avr_pico
My AVR libraries I've created over the years. Many of them have been augmented to be usable with Pi Pico as well.
15 parts6 - 2 layers

- 2 layers102.9 × 105.4 mm

- 2 layers160 × 100 mm

PCB multi-160x100
mkeller0815/MOSFET-RGB-PWM-Control
A small controllerboard that can be used by microcrontrollers to control bigger loads with MOSFET drivers
121 parts1CC0-1.0 - 2 layers80 × 40 mm

- 2 layers120 × 76.1 mm

Temperature Activated Fan Controller
jiroegbu-eng/Temperature_Activated_Fan_Controller
A 12V fan controller circuit designed in KiCad. The board turns a cooling fan on or off based on temperature using a 10k NTC thermistor, an LM358 comparator, and an IRLIZ44N MOSFET.
15 parts
Questions
How big is the BPN PCB?
It measures 57.6 × 54.1 mm and has 2 copper layers, 1.6 mm thick.
What parts does the BPN use?
35 parts, built around the NJM2904D, LM317, 2N2222A and IRLIZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the BPN KiCad files?
From the Xingzhou-Chen/MT repository on GitHub, at the commit this page was made from: the board is bppy/PCB/BPN_2/BPN.kicad_pcb and its schematic bppy/PCB/BPN_2/BPN.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the BPN design in my own project?
Its repository states no licence, so its author keeps all rights: ask Xingzhou-Chen before reusing the design.