Skip to the content
2 layersLed kitchen light controller, the printed circuit board in 3D

Led kitchen light controller

mattwach/avr_pico6

My AVR libraries I've created over the years. Many of them have been augmented to be usable with Pi Pico as well.

Copper layers
2
Thickness
1.6 mm
Parts
15
Nets
13
Pads
41
Tracks, vias
66, 0
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
12 May 2025
Updated
29 May 2026

Overview

Led kitchen light controller is an open-source printed circuit board by mattwach, from the mattwach/avr_pico repository on GitHub. It is a 2-layer board with 15 parts on 13 nets, routed with 66 tracks and 0 vias.

It is built around the ATTINY85-20PU and IRLIZ44N. Its parts include 5 connectors, 3 capacitors, 2 resistors, 2 ICs and 2 transistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

avr_pico

My AVR libraries I've created over the years. Many of them have been augmented to be usable with Pi Pico as well.

Everything is C based and no external frameworks are needed.

You'll need to install avr-gcc yourself before using. Some optional tooling also needs Python3. Only tested on Linux but it should also work in other OSes with approprate tweaking.

Getting Started

text
cd examples/blink_atmel328p
make

Other Examples (As of 2025-5-12)

text
.
├── adc
│   └── entropy
├── atmega_pwm
├── blink_32k_osc
├── blink_atmel328p
├── blink_attiny84
├── blink_attiny85
├── digital_pot_sweep
├── dotstar
│   ├── basic
│   └── counter
├── ds3231
├── epaper
│   ├── bitmap
│   ├── counter
│   ├── lowlevel
│   └── text_16x32
├── ina260
├── ina260_with_oled
├── lowpower
├── ms8607
├── ms8607_with_32k_osc
├── nmea_oled

Also some more complex projects:

text
battery_discharge_monitor  light_bulb_changer.txt         simple_soil_sensor_nrf2401  voltage_meter_lipo_1s_v2
coded_door                 motion_detector_rf24_receiver  square_wave_generator       voltage_monitor_for_siggen
epaper_clock_readme.txt    motion_detector_rf24_sender    truck_backup_beeper
led_kitchen_lights         servo_arm_draw                 voltage_cutoff_lipo_1s
led_lamp_readme.txt        simple_soil_sensor             voltage_meter_lipo_1s

Parts

15
QtyValueFootprintReferences
5Conn_02x01Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_VerticalJ1, J2, J3, J4, J5
21000Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_HorizontalR1, R2
2IRLIZ44NPackage_TO_SOT_THT:TO-220F-3_VerticalQ1, Q2
1100nCapacitor_THT:C_Disc_D5.1mm_W3.2mm_P5.00mmC3
11uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC1
12.2uCapacitor_THT:CP_Radial_D5.0mm_P2.50mmC2
1ATtiny85-20PUPackage_DIP:DIP-8_W7.62mmU2
1LP2950-5.0_TO92Package_TO_SOT_THT:TO-92_InlineU1
1SW_PushButton_Switch_THT:SW_PUSH-12mmSW1

More from mattwach/avr_pico

2
  • 2 layers53 × 24 mmVoltage cuttoff 1s minimal parts, the printed circuit board in 3D

    Voltage cuttoff 1s minimal parts

    mattwach/avr_pico

    My AVR libraries I've created over the years. Many of them have been augmented to be usable with Pi Pico as well.

    14 parts6
  • 2 layers56 × 13.3 mmBackup beeper kicad, the printed circuit board in 3D

    Backup beeper kicad

    mattwach/avr_pico

    My AVR libraries I've created over the years. Many of them have been augmented to be usable with Pi Pico as well.

    6 parts6

Similar boards

  • 2 layersRaposfly UPS, the printed circuit board in 3D

    Raposfly UPS

    LenaicElsig/ups-RaspberryPi

    Uninterrupted power supply for Raspberry Pi

    45 parts4
  • 2 layers102.9 × 105.4 mmLeder, the printed circuit board in 3D

    Leder

    Enweave/remolight

    136 parts1
  • 2 layers160 × 100 mmPCB multi-160x100, the printed circuit board in 3D

    PCB multi-160x100

    mkeller0815/MOSFET-RGB-PWM-Control

    A small controllerboard that can be used by microcrontrollers to control bigger loads with MOSFET drivers

    121 parts1CC0-1.0
  • 2 layers70 × 80 mmInatorStation, the printed circuit board in 3D

    InatorStation

    HiIamChaitanya/InatorStation

    InatorStation - Soldering Station

    37 partsCERN-OHL-S-2.0
  • 2 layers80 × 40 mmTest2, the printed circuit board in 3D

    Test2

    HydrogreenPollub/pcb-fuel-cell-module

    Current sensors, FC short and Current control

    25 partsMIT
  • 2 layers120 × 76.1 mmTemperature Activated Fan Controller, the printed circuit board in 3D

    Temperature Activated Fan Controller

    jiroegbu-eng/Temperature_Activated_Fan_Controller

    A 12V fan controller circuit designed in KiCad. The board turns a cooling fan on or off based on temperature using a 10k NTC thermistor, an LM358 comparator, and an IRLIZ44N MOSFET.

    15 parts
  • 2 layers79.9 × 40.1 mmOpenmv breakout, the printed circuit board in 3D

    Openmv breakout

    opinau/cv-2

    Projekt je sufinancirala Europska unija iz Europskog fonda za regionalni razvoj

    14 partsGPL-3.0

Questions

What parts does the Led kitchen light controller use?

15 parts, built around the ATTINY85-20PU and IRLIZ44N. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Led kitchen light controller KiCad files?

From the mattwach/avr_pico repository on GitHub, at the commit this page was made from: the board is projects/led_kitchen_lights/kicad/led_kitchen_light_controller/led_kitchen_light_controller.kicad_pcb and its schematic projects/truck_backup_beeper/schematic/backup_beeper_kicad/backup_beeper_kicad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Led kitchen light controller design in my own project?

Its repository states no licence, so its author keeps all rights: ask mattwach before reusing the design.