
FREE ENERGY ESP
Sureshbkmr/Energy-Harvesting-Based-on-Beaden-Research-Paper
Based on Beaden Research Paper full custom PCB

InatorStation - Soldering Station
InatorStation is an open-source printed circuit board by HiIamChaitanya, from the HiIamChaitanya/InatorStation repository on GitHub, published under the CERN-OHL-S-2.0 licence. It is a 2-layer board of 70 × 80 mm with 37 parts on 43 nets, routed with 275 tracks and 19 vias.
It is built around the LM2596S-5.0, LM358 and IRLIZ44N, with the 2N2222A and SS34 among its other parts. Its parts include 12 resistors, 7 capacitors, 7 diodes, 3 ICs and 1 transistor. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Hey! This is my open-source soldering station design. This project marks my transition to open-source hardware. InatorStation is designed to be versatile, repairable, and upgradable. It currently supports the T12 handle, with plans to expand compatibility to the JBC T210 handle in the future. The design files and firmware are fully open-source, allowing you to customize, repair, or upgrade the station to suit your needs. I mostly prefer 2 layer home-brewed PCB for repeatability, but later versions will use 4 layers due to complex design (upgrading handle and adding some sensors for precise work).
| Feature | Details |
|---|---|
| Power Supply | 24V, 4A |
| Max Thermal Transfer | 80W |
| Temperature Range | 200℃ - 400℃ |
| Control | PID Auto-Tune |
| Additional Features | Temperature Data Logging |
| **Handle support | T12 , T210 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 10K | Resistor_SMD:R_1206_3216Metric | R1, R3, R4, R6, R7, R11, R13, R14 |
| 3 | 1N4007 | Diode_SMD:D_SMA | D2, D5, D7 |
| 2 | 10uf 35V | Capacitor_SMD:CP_Elec_5x5.7 | C7, C13 |
| 2 | 220uf | Capacitor_SMD:CP_Elec_8x10 | C4, C5 |
| 1 | 100nF | Capacitor_SMD:C_1206_3216Metric | C1 |
| 1 | 100nf | Capacitor_SMD:C_1206_3216Metric | C3 |
| 1 | 18v | Diode_SMD:D_MiniMELF_Handsoldering | D4 |
| 1 | 1K | Resistor_SMD:R_1206_3216Metric | R9 |
| 1 | 1N5819 | Diode_SMD:D_SOD-123 | D1 |
| 1 | 200K | Resistor_SMD:R_1206_3216Metric | R8 |
| 1 | 2N2222A | Package_TO_SOT_SMD:SOT-23_Handsoldering | Q1 |
| 1 | 2nF | Capacitor_SMD:C_1206_3216Metric | C8 |
| 1 | 330uH | Inductor_SMD:L_Coilcraft_LPS4414 | L1 |
| 1 | 4.7K | Resistor_SMD:R_1206_3216Metric | R5 |
| 1 | 47K | Resistor_SMD:R_1206_3216Metric | R12 |
| 1 | 5V | Diode_SMD:D_MicroMELF_Handsoldering | D3 |
| 1 | Arduino_Nano_Every | Module:Arduino_Nano | A1 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | Conn_01x02_Pin | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal | J1 |
| 1 | Conn_01x05_Pin | TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01605HBWC_1x05_P5.08mm_Horizontal | Iron_conect1 |
| 1 | IRLIZ44N | Package_TO_SOT_THT:TO-220F-3_Vertical | U2 |
| 1 | LM2596S-5 | Package_TO_SOT_SMD:TO-263-5_TabPin3 | U3 |
| 1 | LM358 | Package_SO:TSSOP-8_3x3mm_P0.65mm | U1 |
| 1 | RotaryEncoder_Switch_MP | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |
| 1 | SS34 | Diode_SMD:D_SMA | D6 |
| 1 | SSD1306 | library:128x64OLED | Brd1 |

Sureshbkmr/Energy-Harvesting-Based-on-Beaden-Research-Paper
Based on Beaden Research Paper full custom PCB

TCC-Sumo-Telemetria/Eletronica_Sumo_Telemetria
Projetos eletrônicos relacionados ao trabalho de conclusão de curso "SISTEMA DE TELEMETRIA PARA A AVALIAÇÃO DE DESEMPENHO DE UM ROBÔ DE MEGA SUMÔ AUTÔNOMO".




jiroegbu-eng/Temperature_Activated_Fan_Controller
A 12V fan controller circuit designed in KiCad. The board turns a cooling fan on or off based on temperature using a 10k NTC thermistor, an LM358 comparator, and an IRLIZ44N MOSFET.


jastikai/Embedded-System-Project
Repository for Embedded System Project course of University of Oulu, Spring 2024.
It measures 70 × 80 mm and has 2 copper layers, 1.6 mm thick.
37 parts, built around the LM2596S-5.0, LM358, IRLIZ44N and 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HiIamChaitanya/InatorStation repository on GitHub, at the commit this page was made from: the board is PCB/main-board/main-board.kicad_pcb and its schematic PCB/main-board/main-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the CERN-OHL-S-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).