2 layers
Apollo
rigidus/rigidus.ru
Contacts: email: i.am.rigidus טּ gmail.com jabber: rigidus@jabber.ru
111 parts20AGPL-3.0
2 layers104.1 × 89.9 mm
Ledcube 5
xermicus/pcbShelter for my Schemas and PCB stuff
- Size
- 104.1 × 89.9 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 74
- Nets
- 76
- Pads
- 178
- Tracks, vias
- 455, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 7 Aug 2021
- Updated
- 12 Jan 2022
Overview
Ledcube 5 is an open-source printed circuit board by xermicus, from the xermicus/pcb repository on GitHub, published under the MPL-2.0 licence. It is a 2-layer board of 104.1 × 89.9 mm with 74 parts on 76 nets, routed with 455 tracks and 0 vias.
It is built around the 74HC595 and PN2222A. Its parts include 30 resistors, 25 diodes, 6 connectors, 5 transistors and 4 ICs.
Main components
2README
README.mdSchemas and PCB
Shelter for my Schemas and PCB stuff
LICENSE
This project is licensed under the Mozilla Public License
Parts
74| Qty | Value | Footprint | References |
|---|---|---|---|
| 25 | 100R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23 +9 |
| 25 | LED | Connector_Pin:Pin_D1.0mm_L10.0mm | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +9 |
| 5 | 510 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R26, R27, R28, R29, R30 |
| 5 | Conn_01x01 | Connector_Pin:Pin_D1.0mm_L10.0mm | J2, J3, J4, J5, J6 |
| 5 | PN2222A | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4, Q5 |
| 4 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U1, U2, U3, U4 |
| 1 | Conn_01x05_MountingPin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1 |
The 70 most common of 74 parts.
Questions
How big is the Ledcube 5 PCB?
It measures 104.1 × 89.9 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ledcube 5 use?
74 parts, built around the 74HC595 and PN2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ledcube 5 KiCad files?
From the xermicus/pcb repository on GitHub, at the commit this page was made from: the board is ledcube_5/ledcube_5.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ledcube 5 design in my own project?
Its repository publishes it under the MPL-2.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers142.2 × 99.1 mm
CowPi mk3a
DocBohn/CowPi
Library for the Cow Pi hardware kit used to teach memory-mapped I/O, polling, and interrupts.
65 parts1Apache-2.0 - 2 layers50 × 50 mm
PectenAlphaSMD
Mucio-18/Herramientas_Microchip_XC8-PicAs
Repositorio con archivos include de códigos para microcontroladores PIC con el compilador XC8 pic-as
31 parts1 - 2 layers78.7 × 53.3 mm
Coffee timer
tibordp/coffee-timer
Kitchen timer on an ATtiny85 with a 7-segment display and a couple of shift registers
28 parts1GPL-2.0 - 2 layers202.6 × 43.9 mm
- 2 layers301 × 262.6 mm
1 Sistema FINAL
felipesantiagoach-ops/cdp1802-8bit-computer
8-bit microcomputer based on the RCA CDP1802, the first CMOS microprocessor. Three stages designed in KiCad: two built and tested (assembly programs, UART, Tiny BASIC, Elf/OS) and a final design with an ADC, I²C/SPI…
207 parts - 2 layers77.3 × 76.7 mm
Led matrix 8x4 module
jkga/led_matrix_8x4_module
This repository aims to provide a basic program, schematic diagram, and PCB design for an eight by four (8x4) LED matrix with Arduino and SN74HC595 shift register IC
69 partsMIT - 2 layers117.2 × 115.1 mm
