4 layers171.5 × 171.6 mm
2 layers
Apollo
rigidus/rigidus.ru20Contacts: email: i.am.rigidus טּ gmail.com jabber: rigidus@jabber.ru
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 111
- Nets
- 84
- Pads
- 319
- Tracks, vias
- 562, 0
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 15 Mar 2012
- Updated
- 30 Aug 2023
Overview
Apollo is an open-source printed circuit board by rigidus, from the rigidus/rigidus.ru repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board with 111 parts on 84 nets, routed with 562 tracks and 0 vias.
It is built around the ATMEGA168P-20PU, 74HC595 and PN2222A, with the SRD-05VDC-SL-C among its other parts. Its parts include 13 resistors, 5 transistors, 4 ICs, 4 connectors and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
4
ATMEGA168P-20PU
PDIP-2810bit 16KB 2.7V~5.5V 20MHz 23 AVR Power-on reset (POR)、Undervoltage detection (BOR/LVD/LVR/LVI)、Watchdog reset、External pin reset (NRST)、Built-in general-purpose timer、Programmable watchdog、Touch function PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)
74HC595
SOP-16-40℃~+85℃ 1 100ns@5V,50pF 10MHz 2V~6V 74HC 8 Serial-to-Serial or Parallel Tri-State SOP-16 Shift Registers ROHSGRShift Registers
PN2222A
TO-92-3-55℃~+150℃ 1 NPN 1A 300MHz 300mV 40V 625mW NPN TO-92-3 Bipolar (BJT) ROHSNTE ElectronicsBipolar (BJT)
SRD-05VDC-SL-C
插件,19.2x15.6mm100mΩ 10ms 10ms 15A 250V@AC 360mW 5 5V 70Ω Non-Polarized - Single Coil One set changeover: 1C (SPDT - changeover) 插件,19.2x15.6mm Power Relays ROHS松乐Power Relays
README
READMEMy home page written on Common Lisp
Contacts: email: i.am.rigidus טּ gmail.com jabber: rigidus@jabber.ru
Parts
111| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SW_SPST_DIODE | apollo:gateron | SW_0_0, SW_0_1, SW_0_2, SW_0_3, SW_0_4, SW_0_5, SW_0_6, SW_0_7, SW_1_0, SW_1_1, SW_1_2, SW_1_3, SW_1_4, SW_1_5, SW_1_6, SW_1_7 |
| 12 | R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2, R3, R4, R5, R6, R7, R8, Rb1, Rb2, Rb3, Rb4 |
| 9 | Conn_01x01_Male | Connector_Pin:Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork | J_MISO_1, J_MOSI_1, J_SCK_1, J4, J6, J7, J8, J13, J17 |
| 5 | PN2222A | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q6 |
| 2 | 100 Ohm | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R_RED_1, R11 |
| 2 | Conn_01x01_Male | Connector_Pin:Pin_D1.0mm_L10.0mm | J12, J12 |
| 2 | Conn_01x01_Male | apollo:PIN | J1, J2 |
| 2 | LED | LED_THT:LED_D5.0mm_FlatTop | D_RED_1, D3 |
| 1 | 4,3KOhm | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R12 |
| 1 | 5461AS-1 | apollo:5461AS-1 | U2 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm | U1 |
| 1 | 74HC595 | Package_DIP:DIP-16_W7.62mm_LongPads | U3 |
| 1 | ATmega168P-20PU | Package_DIP:DIP-28_W7.62mm | U4 |
| 1 | Buzzer | Buzzer_Beeper:Buzzer_12x9.5RM7.6 | BZ1 |
| 1 | DIODE | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | Pin_D1.0mm_L10.0mm | Connector_Pin:Pin_D1.0mm_L10.0mm | e |
| 1 | SRD-05VDC-SL-C | apollo:RELAY_SRD-05VDC-SL-C | K1 |
The 59 most common of 111 parts.
Questions
What parts does the Apollo use?
111 parts, built around the ATMEGA168P-20PU, 74HC595, PN2222A and SRD-05VDC-SL-C. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Apollo KiCad files?
From the rigidus/rigidus.ru repository on GitHub, at the commit this page was made from: the board is org/lrn/apollo/apollo/apollo.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Apollo design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).
Similar boards
- 2 layers23.2 × 52.1 mm
- 2 layers53 × 40 mm
Doorbell mod
Djayden-R/Smart-Doorbell-Kit
A device that makes a standard doorbell smart and connect it to Home Assistant
12 parts - 2 layers148.3 × 127.5 mm
ISLKey
ISLKey/islkey
ISLKey access-control platform — ESP32 firmware, Electron flasher, Flutter app, KiCad schematic (ISL Technologies)
47 parts - 2 layers50 × 50 mm
- 2 layers99 × 99 mm
- 2 layers142.2 × 99.1 mm
CowPi mk3a
DocBohn/CowPi
Library for the Cow Pi hardware kit used to teach memory-mapped I/O, polling, and interrupts.
65 parts1Apache-2.0 - 2 layers50 × 50 mm
PectenAlphaSMD
Mucio-18/Herramientas_Microchip_XC8-PicAs
Repositorio con archivos include de códigos para microcontroladores PIC con el compilador XC8 pic-as
31 parts1