2 layers55.9 × 23.5 mm
2 layers157.8 × 122.4 mm
Power module
xDocka15/Bachelor_projectV návrhu DPS nejsou provedeny změny popsané v kapitole 3.5.2
- Size
- 157.8 × 122.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 58
- Nets
- 48
- Pads
- 188
- Tracks, vias
- 255, 40
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 27 Oct 2022
- Updated
- 5 Aug 2024
Overview
Power module is an open-source printed circuit board by xDocka15, from the xDocka15/Bachelor_project repository on GitHub. It is a 2-layer board of 157.8 × 122.4 mm with 58 parts on 48 nets, routed with 255 tracks and 40 vias.
It is built around the AMSRU-7815JZ-B, MCP14A0302-E/SN and RJ45, with the IXFP60N25X3 and MBR30150CT among its other parts. Its parts include 21 capacitors, 11 resistors, 7 connectors, 4 ICs and 3 diodes. It belongs with the ESP32 boards of this library.
Main components
5AMSRU-7815JZ-B
SIP,11.5x9mmSIP,11.5x9mm DC-DC Power Modules ROHSAimtecDC-DC Power Modules
MCP14A0302-E/SN
SOIC-8-40℃~+125℃ 1 12ns 13ns 15ns 18ns 360uA 3A 3A 4.5V~18V MOSFET SOIC-8 Gate Drivers ROHSMicrochip TechnologyGate Drivers
RJ45
TH-12PTH-12P SMT ROHSJLCPCB AssemblyUncategorised
IXFP60N25X3
ITO-220AB-31 N-channel 23mΩ@10V 250V 320W 4.5V 60A ITO-220AB-3 MOSFETs ROHSLittelfuse/IXYSMOSFETs
MBR30150CT
TO-220-55℃~+175℃ 1 Pair Common Cathode 100uA@150V 150V 250A 30A 850mV@15A TO-220 Schottky Diodes ROHSYangzhou Yangjie Electronic TechnologySchottky Diodes
README
DPS/Main_module/KiCad/README.mdV návrhu DPS nejsou provedeny změny popsané v kapitole 3.5.2
Parts
58| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 560uF | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 6 | TestPoint_THTPad_D3.0mm_Drill1.5mm | TestPoint:TestPoint_THTPad_D3.0mm_Drill1.5mm | +5V, GND, GND, MOS_D, SEN1, SEN2 |
| 4 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C12, C19, C20, C21 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric | C14, C15, C16, C17 |
| 3 | 4k7 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R9, R10 |
| 2 | 10 | Resistor_THT:R_Axial_Power_L48.0mm_W12.5mm_P55.88mm | R5, R6 |
| 2 | 10 | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2, R8 |
| 2 | 100k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | TERM1, TERM2 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C11, C13 |
| 2 | 67R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R12 |
| 2 | LED | LED_THT:LED_D3.0mm | LED2, LED3 |
| 2 | RJ45 | Connector_RJ:RJ45_OST_PJ012-8P8CX_Vertical | J6, J7 |
| 1 | +48V | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal | J1 |
| 1 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | 2uF | Capacitor_THT:C_Rect_L24.0mm_W12.8mm_P22.50mm_MKT | C18 |
| 1 | 4R7 | Resistor_THT:R_Axial_Power_L48.0mm_W12.5mm_P55.88mm | R1 |
| 1 | AMSRU-7815JZ | Converter_DCDC:Converter_DCDC_RECOM_R-78HB-0.5_THT | U1 |
| 1 | COIL+NTC | Connector_Phoenix_MSTB:PhoenixContact_MSTBA_2,5_4-G_1x04_P5.00mm_Horizontal | J3 |
| 1 | Display | Connector_PinSocket_2.54mm:PinSocket_1x14_P2.54mm_Vertical | J4 |
| 1 | FAN | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | Heatsink_D1 | Heatsink:Heatsink_Fischer_SK104-STC-STIC_35x13mm_2xDrill2.5mm | HS1 |
| 1 | Heatsink_MOS | Heatsink:Heatsink_Fischer_SK104-STC-STIC_35x13mm_2xDrill2.5mm | HS2 |
| 1 | IXFP60N25X3 | Package_TO_SOT_THT:TO-220-3_Vertical | Q2 |
| 1 | MBR30150CT | Package_TO_SOT_THT:TO-220-3_Vertical | D1 |
| 1 | MC78L05ACHT1G | Package_TO_SOT_SMD:SOT-89-3 | U2 |
| 1 | MCP14A0302-E/SN | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Q_NMOS_GDS | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | UART | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J5 |
| 1 | esp32 | esp32_Library:ESP32 | U3 |
More from xDocka15/Bachelor_project
1Similar boards
- 2 layers113.1 × 44.7 mm
Wakeuplight
solderdev/wakeuplight_v2
ESP32 LED-strip wakeuplight with audio stream, NTP, etc.
82 partsGPL-3.0 - 2 layers33.7 × 97.8 mm
HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm
Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm
- 2 layers50 × 55.4 mm
- 2 layers67.9 × 47.8 mm
Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm
- 4 layers73.9 × 84.5 mm
Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51
Questions
How big is the Power module PCB?
It measures 157.8 × 122.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power module use?
58 parts, built around the AMSRU-7815JZ-B, MCP14A0302-E/SN, RJ45 and IXFP60N25X3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power module KiCad files?
From the xDocka15/Bachelor_project repository on GitHub, at the commit this page was made from: the board is DPS/Main_module/KiCad/power_module.kicad_pcb and its schematic DPS/Main_module/KiCad/power_module.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power module design in my own project?
Its repository states no licence, so its author keeps all rights: ask xDocka15 before reusing the design.