

Bela extra
A modular level interface for the bela beagle bone black cape
- Size
- 63 × 85.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 52
- Nets
- 77
- Pads
- 310
- Tracks, vias
- 841, 21
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 5 Dec 2016
- Updated
- 26 Apr 2017
Overview
Bela extra is an open-source printed circuit board by x37v, from the x37v/bela_modular repository on GitHub. It is a 2-layer board of 63 × 85.3 mm with 52 parts on 77 nets, routed with 841 tracks and 21 vias.
It is built around the 74LS125DC. Its parts include 23 resistors, 9 connectors, 8 diodes, 6 capacitors and 6 ICs. It belongs with the interfaces and adapters boards of this library.
Main components
1README
README.mdbela_modular
A modular level interface for the bela beagle bone black cape, kicad projects.
bela is a cape for the beagle bone black
- based off the audio expansion cape
- hardware info
Pin mappings
The digital i/o is mapped as such:
| Bela # | Board | Note |
|---|---|---|
| 00 | in 1 | |
| 01 | in 2 | |
| 02 | in 3 | |
| 03 | in 4 | |
| 04 | digtial in enable | pull low to enable |
| 05 | vfd ctrl enable | pull low to enable |
| 06 | encin2-btn | |
| 07 | encin2-b | |
| 08 | out 1 | |
| 09 | out 2 | |
| 10 | encin2-a | |
| 11 | out 3 | |
| 12 | out 5 | |
| 13 | out 4 | |
| 14 | out 7 | |
| 15 | out 6 |
VFD IO
| P8 | gpio | note | |
|---|---|---|---|
| 12 | ctrl enable | 1_12 | mapped in bela software |
| 14 | digital out enable | 0_26 | |
| 31 | P busy in | 0_10 | |
| 34 | vDE | 2_17 | |
| 35 | CS2 | 0_8 | |
| 36 | CS1 | 2_16 | |
| 37 | /RD and RW | 2_14 | |
| 38 | /WR and RS | 2_15 | |
| 39 | D7 | 2_12 | |
| 40 | D6 | 2_13 | |
| 41 | D5 | 2_10 | |
| 42 | D4 | 2_11 | |
| 43 | D3 | 2_8 | |
| 44 | D2 | 2_9 | |
| 45 | D1 | 2_6 | |
| 46 | D0 | 2_7 |
Errors/rework
The digital 'extra' board from 3/17 requires a rework for the digital out and control enable pins [P8 12 and 14]. These should be detached from 5V and attached to 3.3V.
Parts
52| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | D | Diodes_ThroughHole:D_DO-41_SOD81_P7.62mm_Horizontal | D6, D7, D8, D9, D10, D11, D12, D13 |
| 7 | 20k | xnorman:Resistor_Horizontal_RM10mm-xnorman | R33, R34, R35, R36, R37, R38, R39 |
| 6 | 10n | Capacitors_ThroughHole:C_Rect_L4_W2.5_P2.5 | C7, C8, C9, C10, C11, C12 |
| 6 | PULL | xnorman:Resistor_Horizontal_RM10mm-xnorman | R4, R5, R6, R7, R8, R9 |
| 5 | 74LS125 | Housings_DIP:DIP-14_W7.62mm_LongPads | U3, U4, U5, U6, U7 |
| 4 | 100k | xnorman:Resistor_Horizontal_RM10mm-xnorman | R21, R22, R23, R24 |
| 4 | 10k | xnorman:Resistor_Horizontal_RM10mm-xnorman | R27, R28, R29, R30 |
| 2 | bead | xnorman:Resistor_Vertical_RM5mm-xnor | R1, R3 |
| 1 | 74LS245-xnor | Housings_DIP:DIP-20_W7.62mm_LongPads | U8 |
| 1 | GU128x64E-U100 | Pin_Headers:Pin_Header_Straight_1x16_Pitch2.54mm | P10 |
| 1 | bbbp8 | Pin_Headers:Pin_Header_Straight_2x23_Pitch2.54mm | P2 |
| 1 | bbbp9 | Pin_Headers:Pin_Header_Straight_2x23_Pitch2.54mm | P1 |
| 1 | dig_out | Pin_Headers:Pin_Header_Straight_1x08_Pitch2.54mm | P13 |
| 1 | digital_in | Pin_Headers:Pin_Header_Straight_1x05_Pitch2.54mm | P12 |
| 1 | enc+btn1 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P3 |
| 1 | enc+btn2 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | P4 |
| 1 | ext_power | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | P14 |
| 1 | gui140x16j-7002 | Pin_Headers:Pin_Header_Straight_2x07_Pitch2.54mm | P11 |
More from x37v/bela_modular
3- 2 layers114.3 × 35.6 mm

- 2 layers111.8 × 33 mm

- 2 layers31.8 × 69.9 mm

Similar boards
- 2 layers231.1 × 106.7 mm

- 2 layers98 × 38 mm

Bldc control ver3
pekkaroi/bldc-drive
Cheap and simple brushless DC motor driver designed for CNC applications using STM32 microcontroller
68 parts199GPL-2.0 - 2 layers40 × 100 mm

Back pcb
ZeroPhone/ZeroPhone-PCBs
PCB files for ZeroPhone - for gerbers and schematics, go to "Releases" tab!
118 parts148GPL-3.0 - 2 layers128.3 × 50.8 mm

CD32 Controller
BleuLlama/AmigaSchematics
Schematics of various Commodore Amiga related items
33 parts58MIT - 4 layers337.6 × 105.7 mm

ISA CGA
hkzlab/CGA_Redux
The Color Graphics Adapter Redux board is a more or less faithful clone of the original IBM CGA, based on the original schematics
170 parts56 - 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0 - 2 layers68.6 × 53.3 mm

Fdshield
yas-sim/floppy_disk_shield_2d
This is a project to retain 2D/2DD floppy disk data as a raw bit-stream data. The project includes both HW and SW.
30 parts49Apache-2.0 - 4 layers231.1 × 340.4 mm

Sun3 60 layout2 routing2
54weasels/sun3_60
Notes on each section: - CPU - 68030 support left out entirely - 68881 in the schematics but left out of the PCB - MMU - U2001 which would be needed to support any video, either P4 or built-in not in the PCB - U314…
225 parts35
Questions
How big is the Bela extra PCB?
It measures 63 × 85.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bela extra use?
52 parts, built around the 74LS125DC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bela extra KiCad files?
From the x37v/bela_modular repository on GitHub, at the commit this page was made from: the board is extra/bela-extra.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bela extra design in my own project?
Its repository states no licence, so its author keeps all rights: ask x37v before reusing the design.