2 layers136.2 × 85.9 mm
BATDATUNIT01
mlab-modules/BATDATUNIT01
Multiple parallel Li-ion 18650 battery cell module with BMS and data storage with MCU control.
225 parts5GPL-3.0
2 layers24.6 × 27.4 mm
Flightcontroller
wyarmstrong/THETIMETER- Size
- 24.6 × 27.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 4
- Nets
- 50
- Pads
- 50
- Tracks, vias
- 0, 1
- Pours
- 2
- Routed
- Not yet
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 30 Jun 2026
- Updated
- 1 Jul 2026
Overview
Flightcontroller is an open-source printed circuit board by wyarmstrong, from the wyarmstrong/THETIMETER repository on GitHub. It is a 2-layer board of 24.6 × 27.4 mm with 4 parts on 50 nets.
It is built around the XMC1302T028X0016ABXUMA1 and MS561101BA03-50. Its parts include 3 ICs and 1 switch. It belongs with the robots and motor control boards of this library.
Main components
2
XMC1302T028X0016ABXUMA1
TSSOP-28-40℃~+105℃ 1.8V~5.5V 12bit 16KB 16KB 26 32 Bit 32MHz ARM Cortex-M0 Built-in FLASH TSSOP-28 Microcontrollers (MCU/MPU/SOC) ROHSInfineon TechnologiesMicrocontrollers (MCU/MPU/SOC)
MS561101BA03-50
QFN-8(3x5)-40℃~+85℃ 1.8V~3.6V 140nA 150pa 1Kpa~1.2bar 8.22ms I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output Yes QFN-8(3x5) Pressure Sensors ROHSTE ConnectivityPressure Sensors
Parts
4| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 1571983-4 | 1571983-4:SW4_1571983_4P_TEC | SW1 |
| 1 | MS561101BA03-50 | MS5611-01BA03:SON8_MS5611_TEC | U1 |
| 1 | TLV70233DSER | TLV70233DSER:DSE0006A | U3 |
| 1 | XMC1302T028X0016ABXUMA1 | Downloads1:SOP65P640X120-28N-2-V1 | U2 |
Questions
How big is the Flightcontroller PCB?
It measures 24.6 × 27.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Flightcontroller use?
4 parts, built around the XMC1302T028X0016ABXUMA1 and MS561101BA03-50. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Flightcontroller KiCad files?
From the wyarmstrong/THETIMETER repository on GitHub, at the commit this page was made from: the board is flightcontroller.kicad_pcb and its schematic flightcontroller.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Flightcontroller design in my own project?
Its repository states no licence, so its author keeps all rights: ask wyarmstrong before reusing the design.
Similar boards
- 4 layers70 × 40 mm
Flight comp srad-2026
vito-pp/FlightComputer-SRAD-2026
HW and SW documentation of a Student Researched And Developed (SRAD) flight computer in charge of telemetry for ITBA's rocketry team 2026
86 parts3 - 4 layers101.6 × 26.9 mm
- 4 layers91 × 30.1 mm
Strelka Flight Computer
LulaUAV/Strelka-Flight-Computer
Strelka exists in the family of rocket dog flight computers. This flight computer is fully capable of deploying recovery events.
170 parts2 - 4 layers50 × 75 mm
OneroiV1
HomeOnDuna/Nyx-Flight-Computers
Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.
166 parts1 - 4 layers38.4 × 82.8 mm
- 4 layers44.5 × 44.5 mm
QUT Autopilot Pixracer
Heckus/QUT-OpenFCU
The primary objective is to create an alternative to the difficult-to-source off-the-shelf Pixhawk 6. This work builds upon a edited pixracer version produced by KAI (Wesley) in 2022.
145 parts - 6 layers40 × 40 mm
Kestrel fc
HeyPCB/kestrel-fc
Kestrel H7: STM32H743 FPV flight controller with ICM-20602 + BMI088, MS5611, 16 MB blackbox, 5 V and switchable 10 V BECs.
114 partsCERN-OHL-S-2.0