

Bizcard
Drum machine business card
- Size
- 85 × 55 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 22
- Pads
- 185
- Tracks, vias
- 541, 20
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 20 Mar 2018
- Updated
- 22 Mar 2018
Overview
Bizcard is an open-source printed circuit board by wsaudio, from the wsaudio/Bizcard repository on GitHub. It is a 2-layer board of 85 × 55 mm with 54 parts on 22 nets, routed with 541 tracks and 20 vias.
It is built around the LM358 and TLV70012DDCR. Its parts include 19 switches, 16 diodes, 8 resistors, 4 capacitors and 3 ICs. It belongs with the STM32 boards of this library.
Main components
2LM358
SOP-8-18V~18V 0℃~+70℃ 1.2MHz 10nA 2 24mA 3V~36V 500uA 50nA 5mV 80dB Built-in compensation SOP-8 Operational Amplifier ROHSMSKSEMIOperational AmplifierTLV70012DDCR
SOT-23-5-40℃~+125℃@(Tj) 1 1.2V 200mA 250mV@(200mA) 48uVrms 5.5V 55uA 68dB@(1kHz) Fixed Positive Under Voltage Lockout、Over Current Protection、Over Temperature Protection、Enable SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
README
README.mdBizcard
Drum machine business card: STM32F030 Based drum machine with 4 sounds and 16 pads
FOLDERS Hardware: - Schematics: PDF of schematics - Gerbers: Gerber and drill files required for manufacturer - Project Files: KiCad V4.0.0 (or later) required to open - BOM: Bill of materials required for manufacture Software: Created with Keil uVision 5.0
Pins configuration: PA7: Audio output (TIM1 PWM1) PA0, PA1, PA2, PA3, PA4: LED/Button MUX Out PA5, PA6, PA9, PA10: LED MUX In PA13, PA14, PF0, PF1: Button MUX In
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 10K | Resistors_SMD:R_0402 | R1, R2, R4, R5, R6, R7, R8 |
| 2 | 0.1uF | Capacitors_SMD:C_0402 | C2, C3 |
| 1 | + | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW18 |
| 1 | - | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW19 |
| 1 | 0.8nF | Capacitors_SMD:C_0402 | C1 |
| 1 | 100uF | Capacitors_SMD:CP_Elec_6.3x4.5 | C4 |
| 1 | C | Capacitors_SMD:C_0402 | 0.1uF1 |
| 1 | CONN_01X02 | Pin_Headers:Pin_Header_Straight_1x02_Pitch2.00mm | P1 |
| 1 | EDIT | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW17 |
| 1 | JACK_TRS_6PINS | Connectors_USB:Tayda_3.5mm_stereo_TRS_jack_A-853 | J1 |
| 1 | LED_0 | LEDs:LED_0603 | D1 |
| 1 | LED_1 | LEDs:LED_0603 | D5 |
| 1 | LED_10 | LEDs:LED_0603 | D11 |
| 1 | LED_11 | LEDs:LED_0603 | D15 |
| 1 | LED_12 | LEDs:LED_0603 | D4 |
| 1 | LED_13 | LEDs:LED_0603 | D8 |
| 1 | LED_14 | LEDs:LED_0603 | D12 |
| 1 | LED_15 | LEDs:LED_0603 | D16 |
| 1 | LED_2 | LEDs:LED_0603 | D9 |
| 1 | LED_3 | LEDs:LED_0603 | D13 |
| 1 | LED_4 | LEDs:LED_0603 | D2 |
| 1 | LED_5 | LEDs:LED_0603 | D6 |
| 1 | LED_6 | LEDs:LED_0603 | D10 |
| 1 | LED_7 | LEDs:LED_0603 | D14 |
| 1 | LED_8 | LEDs:LED_0603 | D3 |
| 1 | LED_9 | LEDs:LED_0603 | D7 |
| 1 | LM358 | Housings_SOIC:SOIC-8_3.9x4.9mm_Pitch1.27mm | U2 |
| 1 | PUSH_0 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW1 |
| 1 | PUSH_1 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW5 |
| 1 | PUSH_10 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW11 |
| 1 | PUSH_11 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW15 |
| 1 | PUSH_12 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW4 |
| 1 | PUSH_13 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW8 |
| 1 | PUSH_14 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW12 |
| 1 | PUSH_15 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW16 |
| 1 | PUSH_2 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW9 |
| 1 | PUSH_3 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW13 |
| 1 | PUSH_4 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW2 |
| 1 | PUSH_5 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW6 |
| 1 | PUSH_6 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW10 |
| 1 | PUSH_7 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW14 |
| 1 | PUSH_8 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW3 |
| 1 | PUSH_9 | Buttons_Switches_ThroughHole:SW_PUSH_6mm | SW7 |
| 1 | R | Resistors_SMD:R_0402 | R3 |
| 1 | STM32F030F4Px | Housings_SSOP:TSSOP-20_4.4x6.5mm_Pitch0.65mm | U1 |
| 1 | TLV70012DDC | TO_SOT_Packages_SMD:SOT-23-5 | U3 |
| 1 | USB_OTG | Connectors_USB:USB_Micro-B_Wuerth-629105150521 | P2 |
Similar boards
- 4 layers76.2 × 63.5 mm

- 2 layers132.1 × 45.7 mm

IPoS
peterheinrich/InternetOverSpaghetti
Transmitting IP packages over a pair of spaghetti thus demonstrating how media independent IP really is.
42 parts342 - 2 layers68.8 × 53.6 mm

ZArduino
zmaker/arduino_cookbook
gli sketch del nuovo progetto Arduino Cookbook e dei video di YouTube
46 parts269 - 2 layers152 × 88 mm

RFBitBangSMT
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
271 parts222 - 2 layers118 × 103.5 mm

- 2 layers113 × 62.2 mm

FullScope
tvlad1234/pillScopePlus
Oscilloscope based around the STM32F401 Black Pill and a color LCD screen
15 parts165Apache-2.0 - 2 layers75.2 × 61.1 mm

- 2 layers144.1 × 182.2 mm

SHVC CPU-01
starlightk7/OpenSFC
OSHW Reproduction Parts related to the Super Famicom / Super Nintendo game console
498 parts114CERN-OHL-S-2.0
Questions
How big is the Bizcard PCB?
It measures 85 × 55 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Bizcard use?
54 parts, built around the LM358 and TLV70012DDCR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Bizcard KiCad files?
From the wsaudio/Bizcard repository on GitHub, at the commit this page was made from: the board is Hardware/Project Files/Bizcard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Bizcard design in my own project?
Its repository states no licence, so its author keeps all rights: ask wsaudio before reusing the design.