
ErgoSNM v3 left
siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

Rpi nrf52840-hat is an open-source printed circuit board by wrink, from the wrink/wrink-hw repository on GitHub. It is a 2-layer board of 65 × 56 mm with 31 parts on 74 nets, routed with 312 tracks and 122 vias.
It is built around the E73-2G4M08S1C, 24C32BN(XBLW) and TCC0805X7R475K500FT, with the A254UP-ZS04P and HDGCPH2.54-PZS-2X20 among its other parts. Its parts include 15 resistors, 4 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the nRF52 and nRF5x boards of this library.

| Qty | Value | References | Footprint | Part |
|---|---|---|---|---|
| 2 | 4.7uF | C1, C5 | C0805 | C20416422, TCC0805X7R475K500FT |
| 2 | 18pF | C2, C3 | C0603 | C1647, CL10C180JB8NNNC |
| 1 | RGB_CA | D1 | LED_RGB_1.6x1.5mm_CA_P4-1615 | C7496855, P4-1615G2B2R4TS2-06T-001-24 |
| 2 | Conn_02x04_Odd_Even | J1, J3 | PinHeader_2x04_P2.54mm_Vertical | C41413841, A254UP-ZS04P |
| 1 | Raspberry_Pi_4 | J2 | PinSocket_2x20_P2.54mm_Vertical | C19725278, HDGCPH2.54-PZS-2X20 |
| 11 | 330Ω | R1, R2, R3, R4, R5, R6, R7, R8, R12, R13, R15 | R0603 | C23138, 0603WAF3300T5E |
| 1 | 4.7kΩ | R11 | R0603 | C23162, 0603WAF4701T5E |
| 1 | E73-2G4M08S1C | U1 | WIRELM-SMD_E73-2G4M08S1C | C356849 |
| 1 | 24C32 | U2 | SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | C18723546, 24C32BN(XBLW) |
| 1 | 32.768kHz 12.5pF | X1 | CRYSTAL-SMD_L3.2-W1.5-1 | C7462182 |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 330Ω | jlcpcb:R0603 | R1, R2, R3, R4, R5, R6, R7, R8, R12, R13, R15 |
| 4 | 4.7kΩ | jlcpcb:R0603 | R9, R10, R11, R14 |
| 4 | MountingHole_2.7mm_M2.5 | project:MountingHole_2.7mm_M2.5 | MH1, MH2, MH3, MH4 |
| 2 | 18pF | jlcpcb:C0603 | C2, C3 |
| 2 | 4.7uF | jlcpcb:C0805 | C1, C5 |
| 2 | Conn_02x04_Odd_Even | project:PinHeader_2x04_P2.54mm_Vertical | J1, J3 |
| 1 | 24C32 | jlcpcb:SOP-8_L4.9-W3.9-P1.27-LS6.0-BL | U2 |
| 1 | 32.768kHz 12.5pF | jlcpcb:CRYSTAL-SMD_L3.2-W1.5-1 | X1 |
| 1 | E73-2G4M08S1C | jlcpcb:WIRELM-SMD_E73-2G4M08S1C | U1 |
| 1 | ID_WP | project:PinHeader_1x01_P2.54mm_Vertical | TP1 |
| 1 | RGB_CA | project:LED_RGB_1.6x1.5mm_CA_P4-1615 | D1 |
| 1 | Raspberry_Pi_4 | project:PinSocket_2x20_P2.54mm_Vertical | J2 |

siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

weteor/LuttUnLutt
Lütt Un Lütt is a small 3x5+2 split ortho keyboard with encoder



siderakb/calcite
60/52 keys Kailh Choc V1 low profile switches ortho keyboard

neuman/gripster
thumbdeck — wireless split thumb keyboard (nRF52840 + ZMK, BLE split, i8+-inspired). Layout converged & graded PASS.

ericrlau/SP56
Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.

Rogger/schneggi-sensor
A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.
It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.
31 parts, built around the E73-2G4M08S1C, 24C32BN(XBLW), TCC0805X7R475K500FT and A254UP-ZS04P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wrink/wrink-hw repository on GitHub, at the commit this page was made from: the board is rpi-nrf52840-hat/rpi-nrf52840-hat.kicad_pcb and its schematic rpi-nrf52840-hat/rpi-nrf52840-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wrink before reusing the design.