Skip to the content
2 layers65 × 56 mmRpi nrf52840-hat, the printed circuit board in 3D

Rpi nrf52840-hat

wrink/wrink-hw
Size
65 × 56 mm
Copper layers
2
Thickness
1.6 mm
Parts
31
Nets
74
Pads
156
Tracks, vias
312, 122
Pours
2
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
12 May 2026
Updated
16 Oct 2026

Overview

Rpi nrf52840-hat is an open-source printed circuit board by wrink, from the wrink/wrink-hw repository on GitHub. It is a 2-layer board of 65 × 56 mm with 31 parts on 74 nets, routed with 312 tracks and 122 vias.

It is built around the E73-2G4M08S1C, 24C32BN(XBLW) and TCC0805X7R475K500FT, with the A254UP-ZS04P and HDGCPH2.54-PZS-2X20 among its other parts. Its parts include 15 resistors, 4 capacitors, 3 connectors, 2 ICs and 1 diode. It belongs with the nRF52 and nRF5x boards of this library.

Main components

5

README

rpi-nrf52840-hat/README.md

rpi-nrf52840-hat

PCB

Top Bottom

Schematic

Main

Bill of materials

QtyValueReferencesFootprintPart
24.7uFC1, C5C0805C20416422, TCC0805X7R475K500FT
218pFC2, C3C0603C1647, CL10C180JB8NNNC
1RGB_CAD1LED_RGB_1.6x1.5mm_CA_P4-1615C7496855, P4-1615G2B2R4TS2-06T-001-24
2Conn_02x04_Odd_EvenJ1, J3PinHeader_2x04_P2.54mm_VerticalC41413841, A254UP-ZS04P
1Raspberry_Pi_4J2PinSocket_2x20_P2.54mm_VerticalC19725278, HDGCPH2.54-PZS-2X20
11330ΩR1, R2, R3, R4, R5, R6, R7, R8, R12, R13, R15R0603C23138, 0603WAF3300T5E
14.7kΩR11R0603C23162, 0603WAF4701T5E
1E73-2G4M08S1CU1WIRELM-SMD_E73-2G4M08S1CC356849
124C32U2SOP-8_L4.9-W3.9-P1.27-LS6.0-BLC18723546, 24C32BN(XBLW)
132.768kHz 12.5pFX1CRYSTAL-SMD_L3.2-W1.5-1C7462182

Parts

31
QtyValueFootprintReferences
11330Ωjlcpcb:R0603R1, R2, R3, R4, R5, R6, R7, R8, R12, R13, R15
44.7kΩjlcpcb:R0603R9, R10, R11, R14
4MountingHole_2.7mm_M2.5project:MountingHole_2.7mm_M2.5MH1, MH2, MH3, MH4
218pFjlcpcb:C0603C2, C3
24.7uFjlcpcb:C0805C1, C5
2Conn_02x04_Odd_Evenproject:PinHeader_2x04_P2.54mm_VerticalJ1, J3
124C32jlcpcb:SOP-8_L4.9-W3.9-P1.27-LS6.0-BLU2
132.768kHz 12.5pFjlcpcb:CRYSTAL-SMD_L3.2-W1.5-1X1
1E73-2G4M08S1Cjlcpcb:WIRELM-SMD_E73-2G4M08S1CU1
1ID_WPproject:PinHeader_1x01_P2.54mm_VerticalTP1
1RGB_CAproject:LED_RGB_1.6x1.5mm_CA_P4-1615D1
1Raspberry_Pi_4project:PinSocket_2x20_P2.54mm_VerticalJ2

Similar boards

  • 2 layers115.6 × 106.7 mmErgoSNM v3 left, the printed circuit board in 3D

    ErgoSNM v3 left

    siderakb/ergo-snm-keyboard

    ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

    90 parts172CERN-OHL-P-2.0
  • 2 layers111.5 × 76.8 mmLul left, the printed circuit board in 3D

    Lul left

    weteor/LuttUnLutt

    Lütt Un Lütt is a small 3x5+2 split ortho keyboard with encoder

    54 parts70CERN-OHL-P-2.0
  • 2 layers133 × 114.7 mmBlade right, the printed circuit board in 3D

    Blade right

    ufan/mykeyboard

    A collection of pcb boards designed by me

    106 parts23
  • 2 layers85 × 99.6 mmBadge, the printed circuit board in 3D

    Badge

    urish/aramcon-badge

    Just a badge

    93 parts18
  • 2 layers226 × 94.2 mmCalcite60, the printed circuit board in 3D

    Calcite60

    siderakb/calcite

    60/52 keys Kailh Choc V1 low profile switches ortho keyboard

    196 parts12CERN-OHL-P-2.0
  • 4 layers71.9 × 94 mmThumbdeck right, the printed circuit board in 3D

    Thumbdeck right

    neuman/gripster

    thumbdeck — wireless split thumb keyboard (nRF52840 + ZMK, BLE split, i8+-inspired). Layout converged & graded PASS.

    114 parts11Apache-2.0
  • 2 layers272.1 × 112.3 mmPanel, the printed circuit board in 3D

    Panel

    ericrlau/SP56

    Bluetooth low engery keyboard. Layout based on Sofle keyboard with some modifications. NRF52840 powered. Designed around Kaihl Choc switches and spacing.

    198 parts9CC-BY-SA-4.0
  • 2 layers35 × 30 mmE73-2G4M08S1C-52840, the printed circuit board in 3D

    E73-2G4M08S1C-52840

    Rogger/schneggi-sensor

    A low-power ZigBee sensor integrated with HomeAssistant for monitoring temperature, humidity, and CO2.

    28 parts9GPL-3.0

Questions

How big is the Rpi nrf52840-hat PCB?

It measures 65 × 56 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Rpi nrf52840-hat use?

31 parts, built around the E73-2G4M08S1C, 24C32BN(XBLW), TCC0805X7R475K500FT and A254UP-ZS04P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Rpi nrf52840-hat KiCad files?

From the wrink/wrink-hw repository on GitHub, at the commit this page was made from: the board is rpi-nrf52840-hat/rpi-nrf52840-hat.kicad_pcb and its schematic rpi-nrf52840-hat/rpi-nrf52840-hat.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Rpi nrf52840-hat design in my own project?

Its repository states no licence, so its author keeps all rights: ask wrink before reusing the design.