

DeauthBottom
Repo for ongoing Badge work
- Size
- 87.7 × 135.7 mm
- Copper layers
- 2
- Thickness
- 1.58 mm
- Parts
- 61
- Nets
- 61
- Pads
- 182
- Tracks, vias
- 283, 50
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 6 (file 20220331)
- Created
- 6 May 2019
- Updated
- 29 Apr 2026
Overview
DeauthBottom is an open-source printed circuit board by wrickert, from the wrickert/RMABadge repository on GitHub. It is a 2-layer board of 87.7 × 135.7 mm with 61 parts on 61 nets, routed with 283 tracks and 50 vias.
It is built around the ESP32-S2-SOLO-N8, HX4055M and TM-2023, with the SK6812 among its other parts. Its parts include 11 capacitors, 10 connectors, 5 diodes, 3 ICs and 2 resistors. It belongs with the ESP32 boards of this library.
Main components
4ESP32-S2-SOLO-N8
-- WiFi Modules ROHSEspressif SystemsWiFi ModulesHX4055M
SOT-23-5-40℃~+85℃ 1 4.2V 40uA 4V~9V 500mA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Under-voltage lockout Lithium Battery Not supported Not supported SOT-23-5 Battery Management ROHSHXBattery ManagementTM-2023
SMD-8P,9.5x9.5mmSMD-8P,9.5x9.5mm Multi-Directional Switches ROHSXKB ConnectionMulti-Directional SwitchesSK6812
SMD-4P,5.4x5mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 280mcd~515mcd 3.7V~5.5V 460nm~470nm 520nm~530nm 620nm~625nm 800Kbit/s 815mcd~1275mcd Built-in power-on reset circuit Semi-transparent lens SMD-4P,5.4x5mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
README
README.mdRMABadge
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 100nF | Capacitor_SMD:C_0805_2012Metric | C2, C5, C6, C7, C9, C10, C11 |
| 7 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G*** |
| 5 | SK6812 | LED_SMD:LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5 |
| 4 | Conn_01x01 | cafebabe:SMD Spacer M2.5 | J5, J6, J7, J8 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C3, C4 |
| 2 | Cap Sense | Bsides22:CapSense | J10, J13 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 1k | Resistor_SMD:R_0805_2012Metric | R4 |
| 1 | 2.5k | Resistor_SMD:R_0805_2012Metric | R3 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C8 |
| 1 | 5.1k | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | Battery_Cell | DeauthBottom:AFC12-S02DCC-00 | BT1 |
| 1 | Buzzer | Bsides22:FUET-9032-Buzzer | BZ1 |
| 1 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J3 |
| 1 | ESP32-S2-SOLO | Espressif:ESP32-S2-SOLO | U7 |
| 1 | G*** | kibuzzard-629D3B73 | kibuzzard-629D3B73 |
| 1 | G*** | kibuzzard-629D3ABB | kibuzzard-629D3ABB |
| 1 | G*** | kibuzzard-629D3AC7 | kibuzzard-629D3AC7 |
| 1 | G*** | kibuzzard-629CC9B7 | kibuzzard-629CC9B7 |
| 1 | G*** | kibuzzard-629D3B0B | kibuzzard-629D3B0B |
| 1 | G*** | kibuzzard-629D3AFA | kibuzzard-629D3AFA |
| 1 | G*** | kibuzzard-629CC968 | kibuzzard-629CC968 |
| 1 | G*** | kibuzzard-629D3AD2 | kibuzzard-629D3AD2 |
| 1 | G*** | kibuzzard-629D3AE1 | kibuzzard-629D3AE1 |
| 1 | G*** | kibuzzard-629CC9A4 | kibuzzard-629CC9A4 |
| 1 | G*** | kibuzzard-629CC9AE | kibuzzard-629CC9AE |
| 1 | G*** | kibuzzard-629D3AEB | kibuzzard-629D3AEB |
| 1 | G*** | kibuzzard-629CC9C0 | kibuzzard-629CC9C0 |
| 1 | G*** | kibuzzard-629CFC39 | kibuzzard-629CFC39 |
| 1 | G*** | kibuzzard-629D3B1D | kibuzzard-629D3B1D |
| 1 | G*** | kibuzzard-629CC972 | kibuzzard-629CC972 |
| 1 | HX4055M | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | Oled Display | Dragos:Oled | J2 |
| 1 | Program | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | SW_SPDT | BreadBoardPwr:SK-3296S_switch | SW4 |
| 1 | TM-2023 | DeauthBottom:TM-2023 | U2 |
| 1 | USB_C_Plug_corrected | BadgePirates:USB_C_Receptical-Jing | P1 |
| 1 | Val** | Deauth:wifiRadiation | Ref** |
| 1 | Val** | cafebabe:UELogoAbove | Ref** |
The 60 most common of 61 parts.
More from wrickert/RMABadge
12- 2 layers104.9 × 91.1 mm

- 2 layers73.8 × 143.7 mm

- 2 layers98.7 × 84.6 mm

- 2 layers69.9 × 136.6 mm

- 2 layers98.5 × 89.5 mm

- 2 layers90.2 × 64.4 mm

- 2 layers88.7 × 89.9 mm

- 2 layers90.2 × 45.7 mm

- 2 layers76.9 × 133.3 mm

- 2 layers42 × 110.9 mm

- 2 layers130.4 × 110.8 mm

- 2 layers42 × 42 mm

Similar boards
- 2 layers70 × 122.3 mm

ILI9341 ESP32 GBC
theBrutzler/ESP32_GBC_RETROFIT
A retrofit board with an esp32 for a gameboy color case
124 parts9 - 4 layers83.4 × 42.1 mm

H C3-ulp29
martinberlin/H-C3-029-eink
This is a joint project between Larry Bank and Fasani Corp with the purpouse to make an easy and unexpensive nRF52 BLE badge with a SPI 2.9", a QWIIC connector, and on board RTC
54 parts5MIT - 4 layers152.4 × 63.5 mm

- 2 layers25 × 30 mm

- 2 layers131.2 × 95.7 mm

Swadge S2-Devkit
AEFeinstein/Super-2023-Swadge-HW
Swadge devkit for an ESP32-S2 with all the bells and whistles
86 parts17MIT - 4 layers57 × 56 mm

Iot led strip pcb
0xjmux/iot_leddriver_hw
ESP32-based WS2812B LED Strip Driver PCB, designed for music visualization
85 parts9 - 4 layers48 × 55.4 mm

Minimap pcb v1
lucapoulos/minimap
See our final report for a technical overview of the demo we presented.
77 parts2 - 2 layers

Questions
How big is the DeauthBottom PCB?
It measures 87.7 × 135.7 mm and has 2 copper layers, 1.58 mm thick.
What parts does the DeauthBottom use?
61 parts, built around the ESP32-S2-SOLO-N8, HX4055M, TM-2023 and SK6812. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the DeauthBottom KiCad files?
From the wrickert/RMABadge repository on GitHub, at the commit this page was made from: the board is Badges/Defcon30/Schematics/bottom/DeauthBottom.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the DeauthBottom design in my own project?
Its repository states no licence, so its author keeps all rights: ask wrickert before reusing the design.