

CornConStranger
Repo for ongoing Badge work
- Size
- 73.8 × 143.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 69
- Nets
- 66
- Pads
- 259
- Tracks, vias
- 858, 157
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20210228)
- Created
- 6 May 2019
- Updated
- 29 Apr 2026
Overview
CornConStranger is an open-source printed circuit board by wrickert, from the wrickert/RMABadge repository on GitHub. It is a 2-layer board of 73.8 × 143.7 mm with 69 parts on 66 nets, routed with 858 tracks and 157 vias.
It is built around the ESP32-S2-WROVER-I(4M), HX4055M and WS2812B. Its parts include 14 capacitors, 9 diodes, 6 resistors, 6 connectors and 4 ICs. It belongs with the ESP32 boards of this library.
Main components
3ESP32-S2-WROVER-I(4M)
18x31x3.3mm18x31x3.3mm WiFi Modules ROHSEspressif SystemsWiFi ModulesHX4055M
SOT-23-5-40℃~+85℃ 1 4.2V 40uA 4V~9V 500mA Charging IC Constant current charging、Constant voltage charging、Trickle charging、Automatic recharge、Charge termination、Programmable charging current、Soft-start、Under-voltage lockout Lithium Battery Not supported Not supported SOT-23-5 Battery Management ROHSHXBattery ManagementWS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdRMABadge
Parts
69| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | G*** | svg2mod | svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod, svg2mod |
| 9 | 100nF | Capacitor_SMD:C_0805_2012Metric | C4, C5, C7, C8, C9, C10, C11, C12, C14 |
| 7 | LOGO | LOGO | G***, G***, G***, G***, G***, G***, G*** |
| 7 | WS2812B | cafebabe:SK6812-E_Reverse | D2, D4, D5, D6, D7, D8, D9 |
| 2 | 14Seg | CornConStranger:JSS-4021AUR-21-14Seg | U2, U3 |
| 2 | 1k | Resistor_SMD:R_0805_2012Metric | R1, R6 |
| 2 | 20pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | R_Small | Resistor_SMD:R_0805_2012Metric | R3, R4 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric | C1 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C13 |
| 1 | 47-220 Ohm | Resistor_SMD:R_0805_2012Metric | R5 |
| 1 | 5.1k | Resistor_SMD:R_Array_Convex_4x0603 | RN1 |
| 1 | Battery_Cell | Tests:Dongguan14500 | BT1 |
| 1 | Buzzer | CornConStranger:FUET-1030-3V-Buzzer | BZ1 |
| 1 | C_Small | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | Cap Sense | CornConStranger:CapSence | J4 |
| 1 | Charger Bypass | Resistor_SMD:R_0805_2012Metric | R2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J5 |
| 1 | ESP32-S2-WROVER | RF_Module:ESP32-S2-WROVER | U4 |
| 1 | HX4055M | Package_TO_SOT_SMD:SOT-23-5 | U1 |
| 1 | IR Rx | CornConStranger:IRM-H936 | J2 |
| 1 | LED_Small | LED_SMD:LED_0805_2012Metric | D1 |
| 1 | LED_Small | CornConStranger:IR26-61C | D3 |
| 1 | LOGO | CornConLogo:F.SilkS_g3552 | G*** |
| 1 | Program | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | SW_DIP_x01 | CornConStranger:TS36CA-0.7-Button | SW2 |
| 1 | SW_SPDT | BreadBoardPwr:SK-3296S_switch | SW1 |
| 1 | USB_C_Plug_corrected | BadgePirates:USB_C_Receptical-Jing | P1 |
| 1 | Val** | cafebabe:UELogoAbove | Ref** |
The 68 most common of 69 parts.
More from wrickert/RMABadge
12- 2 layers104.9 × 91.1 mm

- 2 layers87.7 × 135.7 mm

- 2 layers98.7 × 84.6 mm

- 2 layers69.9 × 136.6 mm

- 2 layers98.5 × 89.5 mm

- 2 layers90.2 × 64.4 mm

- 2 layers88.7 × 89.9 mm

- 2 layers90.2 × 45.7 mm

- 2 layers76.9 × 133.3 mm

- 2 layers42 × 110.9 mm

- 2 layers130.4 × 110.8 mm

- 2 layers42 × 42 mm

Similar boards
- 2 layers100 × 100 mm

ESP32S2 MIDI
jildertviet/ESP32S2_MIDI_controller
ESP32S2 based MIDI controller with 5 sliders
29 parts2 - 2 layers82.5 × 140 mm

QCamPCR
GaudiLabs/qPocketPCR
Quantitative PCR machine detecting fluorescence using a camera
113 parts22GPL-3.0 - 2 layers81 × 59 mm

Alarmbuddy
gcormier/alarmbuddy
The output current for sensors is limited to a few milliamps.
34 parts22 - 2 layers56.2 × 53.3 mm

- 6 layers90 × 90 mm

Cansat
DevKiDCosmo/SATELLITE-EDGE-MODULE
A satellite edge module ready for competition
220 parts2GPL-3.0 - 2 layers40 × 43 mm

- 2 layers40 × 40 mm

Esp32Drone
HexaBitsEdu/ESP32-MiniDrone
this project is a drone based on esp32 microcontroller and coreless DC motor
83 parts2 - 2 layers133.8 × 95.4 mm

Questions
How big is the CornConStranger PCB?
It measures 73.8 × 143.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CornConStranger use?
69 parts, built around the ESP32-S2-WROVER-I(4M), HX4055M and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CornConStranger KiCad files?
From the wrickert/RMABadge repository on GitHub, at the commit this page was made from: the board is Badges/CornCon21/Schematics/CornConStranger.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CornConStranger design in my own project?
Its repository states no licence, so its author keeps all rights: ask wrickert before reusing the design.