2 layers
Scoreboard
woongzeyi/project_archive
Bunch of un-git-ted finished projects that are archived "properly".
13 parts
2 layers
Ardupotentio
woongzeyi/project_archiveBunch of un-git-ted finished projects that are archived "properly".
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 43
- Nets
- 74
- Pads
- 235
- Tracks, vias
- 141, 0
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 22 Oct 2023
- Updated
- 10 Dec 2024
Overview
Ardupotentio is an open-source printed circuit board by woongzeyi, from the woongzeyi/project_archive repository on GitHub. It is a 2-layer board with 43 parts on 74 nets, routed with 141 tracks and 0 vias.
It is built around the ADS1115IDGS, ADR421ARMZ and ADR425ARMZ. Its parts include 15 capacitors, 14 resistors, 12 ICs and 2 connectors. It belongs with the RP2040 boards of this library.
Main components
3
ADS1115IDGS
MSOP10Ultra-Small, Low-Power, 4 Channels 16-Bit Analog-to-Digital Converter with Internal ReferenceTexas InstrumentsUncategorised
ADR421ARMZ
MSOP-8-40℃~+125℃@(Ta) 1.75uVp-p 10mA 2.5V 3ppm/℃ 4.5V~18V 500uA Fixed Series ±0.12% MSOP-8 Voltage Reference ROHSAnalog DevicesVoltage ReferencesADR425ARMZ
MSOP-8-40℃~+125℃@(Ta) 10mA 10ppm/℃ 3.4uVp-p 5V 600uA 7V~18V Fixed Series ±0.12% MSOP-8 Voltage Reference ROHSAnalog DevicesVoltage References
README
README.mdProject Archive
| Name | Description |
|---|---|
| T1 Robot | Gamepad-controlled RC car with line-follower code. |
| Flavor Tracker | Simple and compact food analyzer that reveals its composition deep to molecular level. |
| Artificial Intelligence Attendance System (AIAS) | Digital attendance system by face-recognition. |
Parts
43| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C3, C4, C6, C7, C8, C9, C11, C13, C15 |
| 5 | Opamp_Dual | Package_DIP:DIP-8_W7.62mm_Socket | U3, U4, U8, U10, U11 |
| 4 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R11, R12 |
| 4 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R7, R8, R9, R10 |
| 3 | 10uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C1, C5, C10 |
| 2 | 10nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C12, C14 |
| 2 | 5.6kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R4 |
| 2 | Conn_01x03 | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J1, J2 |
| 2 | MCP4725xxx-xCH | Package_TO_SOT_SMD:SOT-23-6 | U2, U9 |
| 1 | 1.2kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R5 |
| 1 | 16.2kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 1uF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 29.4kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R14 |
| 1 | 845Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R13 |
| 1 | ADR421ARMZ | Package_SO:MSOP-8_3x3mm_P0.65mm | U7 |
| 1 | ADR425ARMZ | Package_SO:MSOP-8_3x3mm_P0.65mm | U6 |
| 1 | ADS1115IDGS | Package_SO:TSSOP-10_3x3mm_P0.5mm | U12 |
| 1 | LM2950L-5.0 | Package_TO_SOT_THT:TO-92_Inline | U5 |
| 1 | Pico | RPi_Pico:RPi_Pico_SMD_TH | U1 |
More from woongzeyi/project_archive
2- 2 layers33 × 99.1 mm
Flavor tracker daq
woongzeyi/project_archive
Bunch of un-git-ted finished projects that are archived "properly".
5 parts
Similar boards
- 4 layers147.2 × 96.3 mm
ShieldPCB
AErbsloeh/stimulation_genv3
Hardware Design Files for Experimental Stimulation Platform (Gen 3)
142 partsMIT - 2 layers106.7 × 78.4 mm
- 2 layers69.5 × 47 mm
BackupECG2
namtu06/ecg-amplifier
Designing an ECG amplifier from scratch with KiCad (part of Biomedical Instrumentation coursework)
30 parts - 4 layers70 × 43 mm
USMU v10
joeltroughton/uSMU
Credit card-sized, USB-powered 4 quadrant source-measure unit hardware and firmware
137 parts187 - 4 layers66.3 × 40.2 mm
Cm4 drone
dridri/bcflight
Raspberry Pi based drone flight controller and remote control
56 parts175GPL-3.0 - 4 layers192.1 × 126.9 mm
Stradex1
Bylin-code/Stradex1
STRADEX1 Documentation and Build Instructions ============== I've always wanted to put my violin skills to use in a MIDI environment, but there really isn't a controller on the market that can emulate the feel of a…
24 parts101 - 4 layers100 × 49.8 mm
- 2 layers96 × 74.4 mm
Monolith
luftaquila/monolith
DIY wireless real-time datalogging platform for Student Formula and Baja.
138 parts45
Questions
What parts does the Ardupotentio use?
43 parts, built around the ADS1115IDGS, ADR421ARMZ and ADR425ARMZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ardupotentio KiCad files?
From the woongzeyi/project_archive repository on GitHub, at the commit this page was made from: the board is flavor_tracker/schematics/ardupotentio/ardupotentio.kicad_pcb and its schematic flavor_tracker/schematics/ardupotentio/ardupotentio.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ardupotentio design in my own project?
Its repository states no licence, so its author keeps all rights: ask woongzeyi before reusing the design.