

Soft robot cam usbcv2
walid's favourite pcb designs
- Size
- 66 × 44 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 95
- Nets
- 78
- Pads
- 323
- Tracks, vias
- 764, 221
- Pours
- 32
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 11 Feb 2026
- Updated
- 3 Mar 2026
Overview
Soft robot cam usbcv2 is an open-source printed circuit board by wlatif-cmyk, from the wlatif-cmyk/pcbs repository on GitHub. It is a 4-layer board of 66 × 44 mm with 95 parts on 78 nets, routed with 764 tracks and 221 vias.
It is built around the ESP32-S3-WROOM-1-N16R8, SY8113IADC and PZ127-2-02-Z, with the XC6206P122MR, XC6206P282MR and 1N5819WS among its other parts. Its parts include 32 capacitors, 29 resistors, 9 connectors, 7 ICs and 3 diodes. It belongs with the robots and motor control boards and the ESP32 boards of this library.
Main components
8ESP32-S3-WROOM-1-N16R8
SMD,25.5x18mm-103.5dBm -40℃~+65℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA ESP32-S3R8 On-board PCB Antenna UART、SPI、I2C、GPIO、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesSY8113IADC
TSOT-23-6-40℃~+85℃ 1 200uA 3A 4.2V~18V 500kHz Adjustable Buck Buck Built-in Yes TSOT-23-6 DC-DC Converters ROHS矽力杰silergyDC-DC ConvertersPZ127-2-02-Z
插件,P=1.27mm-40℃~+105℃ 1.27mm 1.27mm 1A 1mm 2 2.4mm 2x2P 3.8mm 4P 500V Black Brass Square pin Through Hole Plugin,P=1.27mm Pin Headers ROHSHCTLPin HeadersXC6206P122MR
SOT-23SOT-23 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHShongjiachengUncategorisedXC6206P282MR
SOT-23-3L-40℃~+85℃ 1 150mV@(100mA) 1uA 2.8V 200mA 6V Fixed Over Current Protection Positive SOT-23-3L Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTorex SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators1N5819WS
SOD-3231 Independent 1A 25A 40V 500uA@40V 600mV@1A SOD-323 Schottky Diodes ROHSGuangdong HottechSchottky DiodesAO3400A
SOT-23-55℃~+150℃ 1 N-channel 1.45V 1.4W 30V 48mΩ@2.5V 5.7A 50pF 630pF 75pF 7nC@10V N-Channel SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETsAO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
README
README.mdParts
95| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 10kΩ | PCM_JLCPCB:R_0603 | R1, R2, R9, R10, R12, R13, R21, R22, R25, R26 |
| 8 | 100nF | PCM_JLCPCB:C_0603 | C9, C11, C12, C21, C29, C30, C34, C35 |
| 8 | 4.7kΩ | PCM_JLCPCB:R_0603 | R11, R14, R15, R16, R17, R19, R20, R23 |
| 6 | 2.2uF | PCM_JLCPCB:C_0603 | C16, C23, C24, C25, C26, C31 |
| 5 | 1uF | PCM_JLCPCB:C_0603 | C13, C17, C18, C19, C20 |
| 4 | 10uF | PCM_JLCPCB:C_0603 | C8, C14, C15, C32 |
| 4 | 22uF | PCM_JLCPCB:C_0603 | C5, C6, C10, C33 |
| 4 | Screw_Terminal_01x02 | easyeda2kicad:JST_B2B-PH-K-S | J6, J7, J9, J10 |
| 3 | 5.1kΩ | PCM_JLCPCB:R_0603 | R27, R30, R33 |
| 2 | 10K | PCM_JLCPCB:R_0603 | R7, R8 |
| 2 | 10nF | PCM_JLCPCB:C_0603 | C22, C27 |
| 2 | 1N5819WS | PCM_JLCPCB:D_SOD-323 | D3, D4 |
| 2 | 200Ω | PCM_JLCPCB:R_0402 | R4, R18 |
| 2 | 22nF | PCM_JLCPCB:C_0603 | C7, C28 |
| 2 | DRV8874PWPR | easyeda2kicad:HTSSOP-16_L5.0-W4.4-P0.65-LS6.4-BL-EP | U4, U5 |
| 2 | LOGO | LOGO | G***, G*** |
| 1 | 100kΩ | PCM_JLCPCB:R_0402 | R5 |
| 1 | 18kΩ | PCM_JLCPCB:R_0603 | R32 |
| 1 | 220pF | PCM_JLCPCB:C_0402 | C4 |
| 1 | 22kΩ | PCM_JLCPCB:R_0402 | R6 |
| 1 | 33kΩ | PCM_JLCPCB:R_0603 | R31 |
| 1 | 6.8uH | easyeda2kicad:IND-SMD_L6.0-W6.0 | L1 |
| 1 | AO3400A | PCM_JLCPCB:Q_SOT-23 | Q4 |
| 1 | AO3401A | easyeda2kicad:SOT-23_L2.9-W1.3-P1.90-LS2.4-BR | Q3 |
| 1 | B5B-PH-K-S-(LF)(SN) | easyeda2kicad:CONN-TH_B5B-PH-K-S-LF-SN | J12 |
| 1 | BHFUSE BSMD1206C-1700T | easyeda2kicad:F1206 | F1 |
| 1 | Conn_01x02_Pin | easyeda2kicad:HDR-TH_2P-P1.27-V-M | J5 |
| 1 | Conn_01x03 | easyeda2kicad:JST_B3B-PH-K-S | J3 |
| 1 | Conn_01x24_Socket | easyeda2kicad:FPC-SMD_AFC07-S24ECA-00 | J8 |
| 1 | Connector | Connector_AMASS:AMASS_XT30U-F_1x02_P5.0mm_Vertical | J1 |
| 1 | ESP32-S3-WROOM-1-N16R8 | easyeda2kicad:ESP32-S3-WROOM-1_EXP | U9 |
| 1 | LSM6DSOXTR | lsm:LGA-14L_L3.0-W2.5-P0.50-TL | AC1 |
| 1 | PZ127-2-02-Z | easyeda2kicad:HDR-TH_4P-P1.27-V-M-R2-C2-S1.27_MH127V-12-04-0820 | U1 |
| 1 | Red | PCM_JLCPCB:D_0603 | D2 |
| 1 | SY8113IADC | easyeda2kicad:TSOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U14 |
| 1 | TP_EN | lsm:CONN-SMD_L3.2-1.6 | TP5 |
| 1 | TP_GND | lsm:CONN-SMD_L3.2-1.6 | TP1 |
| 1 | TYPE-C 16PIN 2MD(073) | lsm:USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB1 |
| 1 | TestPoint_2Pole | TestPoint:TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP2 |
| 1 | XC6206P122MR | Package_TO_SOT_SMD:SOT-23-3 | U13 |
| 1 | XC6206P282MR | Package_TO_SOT_SMD:SOT-23-3 | U12 |
The 91 most common of 95 parts.
Similar boards
- 4 layers49.8 × 47.3 mm

- 4 layers60 × 85 mm

Esp32s3-camera
LCQIANN/esp32s3-camera
ESP32-S3 camera board v1.2: OV2640 DVP camera, microSD, USB-C, LiPo, KiCad 10 project for JLCPCB PCBA
64 parts - 4 layers68.1 × 75 mm

- 2 layers27 × 27 mm

- 2 layers64.4 × 38.9 mm

ESPCameleon
Alan-GIRAUDON/ESPCameleon
ESPCameleon is an ESP32 Camera PCB. It takes most of its design from the AI Thinker ESP32-Cam and adapt it to use the ESP32-S2-MINI-2-N4R2. This board allow video capture and streaming through WiFi or USB.
45 partsMIT - 2 layers63.2 × 27.7 mm

ESPCameleonV2
Alan-GIRAUDON/ESPCameleonV2
ESPCameleonV2 is an ESP32 Camera PCB. It resolve the biggest issues of its first version, ESP32Cameleon. This board allow video capture and streaming through WiFi or USB.
47 partsMIT - 2 layers95 × 48 mm

Primis FaceTracker
Nieko27/Frame-Workshop
A repo for all things steam frame hardware.
50 parts93CERN-OHL-S-2.0 - 4 layers38.5 × 19.5 mm

Questions
How big is the Soft robot cam usbcv2 PCB?
It measures 66 × 44 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Soft robot cam usbcv2 use?
95 parts, built around the ESP32-S3-WROOM-1-N16R8, SY8113IADC, PZ127-2-02-Z and XC6206P122MR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Soft robot cam usbcv2 KiCad files?
From the wlatif-cmyk/pcbs repository on GitHub, at the commit this page was made from: the board is softrobotpcb/soft_robot_cam_usbcv2.kicad_pcb and its schematic softrobotpcb/soft_robot_cam_usbcv2.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Soft robot cam usbcv2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask wlatif-cmyk before reusing the design.

