

Pcbchallenge1
100 days of 100 projects ;)
- Size
- 34.6 × 38.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 19
- Nets
- 68
- Pads
- 164
- Tracks, vias
- 311, 62
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 15 Nov 2025
- Updated
- 11 Feb 2026
Overview
Pcbchallenge1 is an open-source printed circuit board by wlatif-cmyk, from the wlatif-cmyk/100daysofprojects repository on GitHub. It is a 2-layer board of 34.6 × 38.4 mm with 19 parts on 68 nets, routed with 311 tracks and 62 vias.
It is built around the RP2040, BMP280 and W25Q16JVSSIQ, with the ICM-20948 among its other parts. Its parts include 8 capacitors, 5 resistors, 4 ICs, 1 connector and 1 switch. It belongs with the RP2040 boards of this library.
Main components
4RP2040
LQFN-56(7x7)12bit 133MHz 30 LQFN-56(7x7) Microcontrollers (MCU/MPU/SOC) ROHSRaspberry PiMicrocontrollers (MCU/MPU/SOC)BMP280
LGA-8(2x2.5)-40℃~+85℃ 0.12hpa 1.5pa/K 1.71V~3.6V 1hpa 300nA 30Kpa~1.1bar I2C、SPI Integrated ADC and digital interface、On-chip calibration and non-volatile storage、Standby mode、On-chip temperature output LGA-8(2x2.5) Pressure Sensors ROHSBoschPressure SensorsW25Q16JVSSIQ
SOIC-8-208mil-40℃~+85℃ 100,000 cycles 10uA 133MHz 16Mbit 2.7V~3.6V 20 Years 3ms SPI SOIC-8-208mil NOR FLASH ROHSWinbondNOR FLASHICM-20948
QFN-24(3x3)-40℃~+85℃ 0.5KB 1.71V~3.6V 16bit 8uA Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
README
README.md100 Days of Projects — TikTok Series
https://www.tiktok.com/@yappingaddiction
https://www.instagram.com/yappingaddiction/
Welcome to my 100-day challenge!
Every day, I build something small, fun, or weird — and post it on TikTok.
This repo collects the code, notes, and mini-projects from each day.
Follow along as this slowly turns into a chaotic but glorious archive of experiments.
📆 Daily Projects
Day 1 — Traffic light system
Day 2 — Light meter that runs off of ultrasonic sensor
Day 3 — Ball game with LCD Module
Day 4 — Fan Motion Detection
Day 5 — LED colour changer
Day 6 — Anti-procrastination tool
Day 7 — Anti-procrastination tool major improvements - added timer, timer reset button, and improved screen contrasting
Day 8 — LED Night light
Day 9 — Button piano
Day 10 — Improvements to LED night light - added alarm system
Day 11 — Clothing temperature/humidity sensor
Day 12 — Arduino project generator
Day 13 — Servo motor joystick control
Day 14 — Servo motor joystick control + Remote control using IR sensors
Day 15 — Budgeting dashboard site
Day 16 — Servo motor hand recognition control
Day 17 — Servo motor hand recognition control2 - same concept but motor moves when hand open/closes
Day 18 — Interview prep tool to prioritize/learn proper eye contact
Day 19 — Funny face tool using OpenCV
Day 20 — Advanced touchless volume controller
Day 21 — Motion gesture controlled brightness
Day 22 — Motion gesture cursor
Day 23 — Spotify playlist analyzer
Day 24 — Currency converter
Day 25 — Weather app
Day 26 — To do list app
Day 27 — "Panda" - designer player upon detection of panda plushie
Day 28 — Basic chatbot
Day 29 — Number guesser
Day 30 — Motion gesture controlled LED
Day 31 — RFID card reader
Day 32 — Password manager
Day 33 — Expense Tracker
Day 34 — Soldered project (no code)
Day 35 — Cheat code controlled door lock
Day 36 — Added pin unlock on phone for door lock
Day 37 — Built final prototype for door lock
Day 38 — Portable system wiring (No code)
Day 39 — Joystick controlled cursor
Day 40 — Hypnotic art drawing game on python
Day 41 — Esp32 portable communication led project
Day 42 — Mood bot
Day 43 — Mini Spotify display
Day 44 — Added buttons to Spotify display
Day 45 — Math alarm clock
Day 46 — Improved math alarm clock
Day 47 — STM32 power modes
Day 48 — Pong on joysticks
Day 49 — ESP32 WIFI network ranking
Day 50 — Balloon popper
Day 51 — Productivity measure using CV
Day 52 — ESP32 WIFI channel interference detector
Day 53 — Improved day 18 project (interview eye contact detector) to give score afterward
Parts
19| Qty | Value | Footprint | References |
|---|---|---|---|
| 7 | 0.1uF | Capacitor_SMD:CP_Elec_3x5.3 | C1, C2, C3, C4, C5, C7, C8 |
| 2 | 5.1K | Resistor_SMD:R_0201_0603Metric | R3, R4 |
| 1 | 10 | Resistor_SMD:R_0201_0603Metric | R5 |
| 1 | 10uF | Capacitor_SMD:CP_Elec_4x5.8 | C6 |
| 1 | 4.7K | Resistor_SMD:R_0201_0603Metric | R1 |
| 1 | BMP280 | Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U4 |
| 1 | ICM-20948 | Sensor_Motion:InvenSense_QFN-24_3x3mm_P0.4mm | U2 |
| 1 | R | Resistor_SMD:R_0201_0603Metric | R2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SW_Push | Resistor_SMD:R_0201_0603Metric | SW1 |
| 1 | Usb-C Connector | PCM_JLCPCB:TYPE-C-SMD_HX-TYPE-C-16PIN | J1 |
| 1 | W25Q16JVSS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U3 |
More from wlatif-cmyk/100daysofprojects
8- 4 layers22.4 × 32.2 mm

- 2 layers25.6 × 26.6 mm

- 2 layers25 × 26.5 mm

- 2 layers100.2 × 92.6 mm

- 2 layers94.6 × 64 mm

- 2 layers18 × 19.8 mm

- 2 layers77.5 × 106 mm

- 2 layers41.7 × 49.9 mm

Similar boards
- 4 layers115.5 × 79.5 mm

Rocket Project
ZachS07/RP2040-IMU-Altimeter-PCB
Custom PCB motion and altitude data logger. RP2040 microcontroller with onboard IMU, barometric sensor, and flash storage. It's suitable for model rockets, drones, and other applications.
33 parts1 - 4 layers50 × 50 mm

MCU AURA
alexander-armitage/AURA-Hardware
AURA is a set of modular PCBs designed in KiCad for versatile robotics and aerospace applications — from drones and quadrupeds to rockets.
113 parts4MIT - 4 layers55.3 × 42.3 mm

Skyfall(BackAgain)
Melih2123/Project_Skyfall
Open-source. Modular. Built to grow. Powered by ESP32-S3 and lots of prayers ;_;
72 parts2 - 2 layers46.9 × 46.6 mm

Fourth
Bhakti-A/Maya_V_FlightController
This is a custom flight controller PCB designed for drones.
84 parts1 - 2 layers48.1 × 48 mm

- 2 layers44 × 72 mm

IMU+Barometer logger
Dhruv2212-star/9-axis-IMU-barometer-Data-logger-
This project is a compact, battery-powered data logger designed to record motion and environmental data in a single device.
59 parts - 4 layers55 × 110 mm

- 4 layers27.5 × 83.3 mm

Questions
How big is the Pcbchallenge1 PCB?
It measures 34.6 × 38.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pcbchallenge1 use?
19 parts, built around the RP2040, BMP280, W25Q16JVSSIQ and ICM-20948. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pcbchallenge1 KiCad files?
From the wlatif-cmyk/100daysofprojects repository on GitHub, at the commit this page was made from: the board is kicad/practiceschematics/pcbchallenge1/pcbchallenge1.kicad_pcb and its schematic kicad/algaephotobioreactor/algae_photobioreactor/flu_excite.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pcbchallenge1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask wlatif-cmyk before reusing the design.