
Programmer Board
Reid-n0rc/LMS-6_Interface_Board
Interface to the LMS-6 radiosonde carde edge connector.

A minimalist re-implementation of Oscar Stella's HF-103 work
HF103-min is an open-source printed circuit board by wittend, from the wittend/HF103-min repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 160 × 100 mm with 66 parts on 104 nets.
It is built around the AMS1117CD-1.8, AP7361C-33E and SI5351A-B-GT, with the MPZ2012S601AT000 among its other parts. Its parts include 38 capacitors, 12 resistors, 7 connectors, 4 ICs and 3 crystals.
A minimalist re-implementation of Oscar Stella's HF-103 work
Possibly to be renamed ClementineSDR. Currently just a KiCad capture of parts of Oskar Stella's HF-103/BBRF-103 projects. This is intended to assist in prototyping for the HamSCI/TAPR receiver atmospheric phenomena. Will be coupled with a GPSDO design TBD.
For use in the HamSCI Personal Space Weather Station (PSWS) project.
For more info, see https://hamsci.org and https://tangerinesdr.com.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 100pf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31, C32, C33, C34, C35 +3 |
| 8 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R4, R6, R7, R8, R9, R10, R11 |
| 6 | ? pF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C13, C38, C39 |
| 4 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6, C10, C11 |
| 3 | 1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7, C8, C12 |
| 3 | 27 MHz | Crystal:Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSoldering | Y1, Y1, Y2 |
| 2 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C1 |
| 2 | 100 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R13 |
| 2 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C57, C62 |
| 2 | 2x20-Odd/Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | P1, P2 |
| 1 | 1 nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C40 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 10uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9 |
| 1 | 1k2 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 2x20-Odd/Even | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Horizontal | J1 |
| 1 | AMS1117CD-1.8 | Package_TO_SOT_SMD:TO-252-3_TabPin2 | U1 |
| 1 | AP7361C-33E | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | Conn_01x03 | Connector_PinHeader_1.27mm:PinHeader_1x03_P1.27mm_Vertical | P8 |
| 1 | Conn_01x04 | Connector_PinHeader_1.27mm:PinHeader_1x04_P1.27mm_Vertical | P4 |
| 1 | Conn_01x08 | Connector_PinHeader_1.27mm:PinHeader_1x08_P1.27mm_Vertical | P5 |
| 1 | Conn_01x16 | Connector_PinHeader_1.27mm:PinHeader_1x16_P1.27mm_Vertical | P3 |
| 1 | MPZ2012S601AT | MPZ2012S601AT000:IND_2012_TDK | FL1 |
| 1 | NCP360SNT1G | NCP360SNT1G:TSOP5_3X1P5_ONS | U7 |
| 1 | Power | Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder | DL1 |
| 1 | SI5351A-B-GT | Package_SO:MSOP-10-1EP_3x3mm_P0.5mm_EP1.73x1.98mm | U6 |

Reid-n0rc/LMS-6_Interface_Board
Interface to the LMS-6 radiosonde carde edge connector.

M-Mrk/MultiBench
A bench multimeter with the usual functions, but also with usb connectivity to log, stream and monitor readings.

nicolaeandreivasile/bike-embedded-app
Embedded application for bikes that collect and display various riding data.

Tobias66662/Bachelor-Project-PCB-Designs
PCB to be used in the Enose (for Bachelor Project)

tynix5/no_fly_zone
STM32-based quadcopter and remote controller running on custom hardware and software

ColbyDAllen/Wearable-Drum-Machine
This project is mostly complete. Until I can find a more suitable input/sensory solution, please consider this work on hiatus.

ErdemHtyl/Tulpar_Mini_FCB
This project is under active development. The table below shows what is finished and what is still in progress:

It measures 160 × 100 mm and has 4 copper layers, 1.6 mm thick.
66 parts, built around the AMS1117CD-1.8, AP7361C-33E, SI5351A-B-GT and MPZ2012S601AT000. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wittend/HF103-min repository on GitHub, at the commit this page was made from: the board is HF103-Min.kicad_pcb and its schematic HF103-ADC.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).