
Not a varta
wiretap-retro/Not-A-Varta-CR2032
Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.

A standard 19mm length Varta replacement with a CR1220 and charge protection.
Not A Varta is an open-source printed circuit board by wiretap-retro, from the wiretap-retro/Not-A-Varta repository on GitHub. It is a 2-layer board of 21.5 × 6.4 mm with 4 parts on 4 nets, routed with 20 tracks and 1 via.
It is built around the MAX40200AUK+T. Its parts include 3 connectors and 1 IC.
A standard 19mm length Varta replacement with a CR1220 and charge protection.

This is a battery replacement for old circuit boards utilizing the 19mm length 3.6V Varta battery. The replacement is a 3V CR1220 with charge circuit protection. Low voltage drop is achieved with the MAX40200 "ideal diode" chip. Most boards will work with RTC/CMOS function at 3V, so check datasheets before you go through the hassle of building and installing this. Some motherboards have additional diodes that need to be bypassed. Clean up any corrosion from the pre-existing evil Varta before installation.
CR2032 version here: https://github.com/wiretap-retro/Not-A-Varta-CR2032
Open hardware design. Do what you want with it.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x01 | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J2, J3 |
| 1 | 2895 | 2895 | J1 |
| 1 | MAX40200AUK+T | SOT95P280X145-5N | IC1 |

wiretap-retro/Not-A-Varta-CR2032
Similar to the "Not-A-Varta", but with a vertical CR2032 holder, and elongated mounting holes.

N1UGK/PCUI_Public
Collection of Programs and Utilities for the Pocket Computer Universal Interface

0sirys/SmartInsole_PF_PCB
Proyecto final, plantilla para medicion de presion plantar



N1UGK/RetroLink_Public
RetroLink connects a standard POTS (Plain Old Telephone Service) analog telephone to the Internet over Wi-Fi, allowing peer-to-peer calling between devices and retro telephony interfacing.


joypad-ai/joypad-os
Universal controller firmware for building adapters, dongles, and custom controllers.
It measures 21.5 × 6.4 mm and has 2 copper layers, 1.6 mm thick.
4 parts, built around the MAX40200AUK+T. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the wiretap-retro/Not-A-Varta repository on GitHub, at the commit this page was made from: the board is not-a-varta/not-a-varta.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask wiretap-retro before reusing the design.