2 layers42 × 40 mm
2 layers50 × 28 mm
Pidoor
Wirehive/PiDoor2PCBs for connecting Raspberry Pi, PN532 NFC, and Maglock
- Size
- 50 × 28 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 36
- Nets
- 30
- Pads
- 123
- Tracks, vias
- 215, 6
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 30 Sep 2016
- Updated
- 31 Oct 2016
Overview
Pidoor is an open-source printed circuit board by Wirehive, from the Wirehive/PiDoor repository on GitHub. It is a 2-layer board of 50 × 28 mm with 36 parts on 30 nets, routed with 215 tracks and 6 vias.
It is built around the ST3232BDR, MIC5317-3.3YM5-TR and PMV16XNR. Its parts include 10 capacitors, 10 resistors, 7 connectors, 3 transistors and 2 ICs.
Main components
3
ST3232BDR
SO-16-40℃~+85℃ 2 2 3V~5.5V 400Kbps Transceiver SO-16 RS232 ICs ROHSSTMicroelectronicsRS232 ICs
MIC5317-3.3YM5-TR
SOT-23-5-40℃~+125℃@(Tj) 1 150mA 200uVrms 29uA 3.3V 310mV@(150mA) 6V 80dB@(1kHz) Fixed Over Current Protection、Thermal Shutdown、Enable control Positive SOT-23-5 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSMicrochip TechnologyVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PMV16XNR
SOT-23-55℃~+150℃ 1 N-channel 1.24nF 1.2W 125pF 145pF 20.2nC@4.5V 20V 20mΩ@4.5V 8.6A 900mV N-Channel SOT-23 MOSFETs ROHSNexperiaMOSFETs
Parts
36| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | 1µ | Capacitors_SMD:C_0603 | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10 |
| 7 | 4k7 | Resistors_SMD:R_0603 | R4, R5, R6, R7, R8, R9, R10 |
| 3 | 4K7 | Resistors_SMD:R_0603 | R1, R2, R3 |
| 3 | PMV16XN | TO_SOT_Packages_SMD:SOT-23 | Q1, Q2, Q3 |
| 2 | JUMPER | pidoor:SMD_Jumper | JP1, JP2 |
| 1 | CONN_02X13 | Socket_Strips:Socket_Strip_Straight_2x13 | P1 |
| 1 | D_Small | Diodes_SMD:SOD-123 | D1 |
| 1 | IN0 | pidoor:3_5mm_terminal_1x02 | P3 |
| 1 | IN1 | pidoor:3_5mm_terminal_1x02 | P4 |
| 1 | IN2 | pidoor:3_5mm_terminal_1x02 | P5 |
| 1 | MAG | pidoor:3_5mm_terminal_1x04 | P7 |
| 1 | MIC5317-3.3YM5 | pidoor:MIC5317 | U1 |
| 1 | PWR | pidoor:3_5mm_terminal_1x02 | P2 |
| 1 | READER | pidoor:3_5mm_terminal_1x05 | P6 |
| 1 | RELAY_G6L | pidoor:Relay_G6L | K1 |
| 1 | ST3232BDR | Housings_SOIC:SOIC-16_3.9x9.9mm_Pitch1.27mm | U2 |
Questions
How big is the Pidoor PCB?
It measures 50 × 28 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Pidoor use?
36 parts, built around the ST3232BDR, MIC5317-3.3YM5-TR and PMV16XNR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pidoor KiCad files?
From the Wirehive/PiDoor repository on GitHub, at the commit this page was made from: the board is pidoor/pidoor.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pidoor design in my own project?
Its repository states no licence, so its author keeps all rights: ask Wirehive before reusing the design.
More from Wirehive/PiDoor
1Similar boards
- 2 layers100 × 100 mm
- 2 layers160 × 122 mm
JackOfAllTradesV1p0
czalinski/ThlHwTestDevices
KiCad designs, firmware and documentation for circuits that support testing of electrical hardware, such as HASS and HALT testing.
119 partsMIT - 2 layers60 × 60 mm
Water leak sms alarm
Peppson/water-leak-sms-alarm
Small battery powered device that detects water leakage and sends an SMS alert
35 partsGPL-3.0 - 2 layers100 × 100 mm
Led matrix pcb
ph37/led_matrix_pcb
PCB design with serial interface to 32x16 array of LEDs using 788BS 8x8 LED components.
103 parts - 2 layers82.5 × 29 mm
DPL
spel-uchile/balloon_experiment
Radiosonde platform to develop, test and integrate payloads for the future CubeSats missions
40 parts6 - 4 layers37.6 × 30.6 mm
Bias generator LT8362
OpenSiPM/sipm-bias-control
Single channel silicon photomultipliers for high-speed fluorescence imaging
61 parts44 - 4 layers19 × 111.1 mm
Gliss main
BelaPlatform/gliss-hardware
You can find the source KiCad files for the Gliss module in this repository. This project is open hardware and under the Creative Commons Share Alike license 4.0.
107 parts18 - 2 layers93.3 × 100 mm
Base convert
sdp8483/base_convert
handheld calculator to convert between hex, dec, and bin
98 parts3MIT