2 layers12 × 49.3 mm
4 layers23.8 × 36.3 mm
Haptic knob
wirano/haptic-knob3- Size
- 23.8 × 36.3 mm
- Copper layers
- 4
- Thickness
- 1.61 mm
- Parts
- 70
- Nets
- 85
- Pads
- 319
- Tracks, vias
- 552, 136
- Pours
- 331
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 1 Apr 2023
- Updated
- 9 May 2023
Overview
Haptic knob is an open-source printed circuit board by wirano, from the wirano/haptic-knob repository on GitHub. It is a 4-layer board of 23.8 × 36.3 mm with 70 parts on 85 nets, routed with 552 tracks and 136 vias.
It is built around the ESP32-S3-WROOM-1U-N4, CH224K and MT2492, with the PDRV8311HRRWR, SHT30-DIS and LSM6DSO among its other parts. Its parts include 33 capacitors, 12 resistors, 8 diodes, 7 ICs and 3 connectors. It belongs with the ESP32 boards of this library.
Main components
7
ESP32-S3-WROOM-1U-N4
SMD,19.2x18mm-103.5dBm -40℃~+85℃ 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 UART、SPI、I2C、I2S、USB SMD,19.2x18mm WiFi Modules ROHSEspressif SystemsWiFi Modules
CH224K
ESSOP-10-150mil-1mm-40℃~+90℃ 100W 4V~30V 5V、9V、12V、15V、20V Overvoltage Protection、Thermal Protection PD 3.0 Power Receiver Controller ESSOP-10-150mil-1mm USB PD ROHSWCH (Nanjing Qinheng Microelectronics)USB Converters
MT2492
SOT-23-6-40℃~+85℃@(TA) 1 2A 4.5V~16V 600kHz Adjustable Buck Buck Built-in Yes SOT-23-6 DC-DC Converters ROHS西安航天民芯DC-DC Converters
PDRV8311HRRWR
RRW-40℃~+125℃ 200mΩ 5A 5A RRW Brushless DC (BLDC) Motor Driver ROHSTexas InstrumentsBrushless DC (BLDC) Motor Driver
SHT30-DIS
DFN-8DFN-8 Temperature and Humidity Sensor ROHSSensirionUncategorised
LSM6DSO
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 9KB Accelerometer Gyroscope SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSSTMicroelectronicsAccelerometers
SK6812SIDE-A
SMD-4P,4x1.6mm-40℃~+85℃ 0.6mA 1.6mm 120° 160mcd~320mcd 1kHz 2000V 240mcd~450mcd 2mm 3.7V~5.5V 460nm~470nm 4mm 520nm~535nm 620nm~625nm 697.5mcd~1162.5mcd 800Kbit/s Built-in power-on reset circuit Translucent Frosted Lens SMD-4P,4x1.6mm RGB LEDs(Built-in IC) ROHSOPSCO OptoelectronicsRGB LEDs(Built-In IC)
Parts
70| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 0.1uF | Capacitor_SMD:C_0402_1005Metric | C4, C5, C11, C15, C20, C23, C24, C31, C32, C33, C34, C35, C36, C37, C38, C41 +1 |
| 8 | SK6812SIDE-A | library:SK6812D-EC3210R | D1, D2, D3, D4, D5, D6, D7, D8 |
| 5 | 10K | Resistor_SMD:R_0402_1005Metric | R3, R6, R11, R13, R14 |
| 3 | 1uF | Capacitor_SMD:C_0402_1005Metric | C1, C19, C25 |
| 3 | 22uF | Capacitor_SMD:C_0805_2012Metric | C28, C29, C30 |
| 2 | (7pF) | Capacitor_SMD:C_0402_1005Metric | C2, C3 |
| 2 | 0.1uF 25V | Capacitor_SMD:C_0402_1005Metric | C16, C22 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R1, R4 |
| 2 | 10uF 25V | Capacitor_SMD:C_0603_1608Metric | C18, C21 |
| 1 | 0.1uF 20V | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 0R | Resistor_SMD:R_0402_1005Metric | R5 |
| 1 | 100K | Resistor_SMD:R_0402_1005Metric | R9 |
| 1 | 10uH | Inductor_SMD:L_Sunlord_SWPA3015S | L5 |
| 1 | 1K | Resistor_SMD:R_0402_1005Metric | R7 |
| 1 | 22K | Resistor_SMD:R_0402_1005Metric | R10 |
| 1 | 22nF | Capacitor_SMD:C_0402_1005Metric | C27 |
| 1 | 22pF | Capacitor_SMD:C_0402_1005Metric | C26 |
| 1 | 22uF | Capacitor_SMD:C_0402_1005Metric | C12 |
| 1 | BLDC | Connector_JST:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | M1 |
| 1 | CH224K | library:ESSOP-10_3.9x4.9mm_P1.00mm_EP2.3x3.2mm | U4 |
| 1 | Conn_01x14_Socket | Connector_JST:JST_SHL_SM14B-SHLS-TF_1x14-1MP_P1.00mm_Horizontal | J2 |
| 1 | Conn_ARM_SWD_TagConnect_TC2030-NL | Connector:Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical | J3 |
| 1 | Crystal_Small | Crystal:Crystal_SMD_2012-2Pin_2.0x1.2mm | Y1 |
| 1 | ESP32-S3-WROOM-1U | Espressif:ESP32-S3-WROOM-1U | U1 |
| 1 | LOGO | w_logo:Logo_silk_CC-BY-SA_10x4.5mm | G*** |
| 1 | LSM6DSO | Package_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y | U5 |
| 1 | MT2492 | Package_TO_SOT_SMD:SOT-23-6 | U6 |
| 1 | MT6701 | Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm | U3 |
| 1 | PDRV8311HRRWR | library:PDRV8311HRRWR | U2 |
| 1 | SHT30-DIS | Sensor_Humidity:Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U7 |
| 1 | TBD | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | USB_C_Receptacle_USB2.0 | Connector_USB:USB_C_Receptacle_XKB_U262-16XN-4BVC11 | J1 |
The 67 most common of 70 parts.
More from wirano/haptic-knob
1Similar boards
- 4 layers35 × 40 mm
- 2 layers28.9 × 21.9 mm
- 2 layers35 × 50 mm
Imu rc hand unit
DimitriOnLSD/imu-rc
Gesture-based RC car controller using ESP32-S3, BLE, LSM6DSO IMU, OLED display, and LiPo battery with USB-C charging.
76 parts7MIT - 4 layers70.1 × 40 mm
CARP
aweeri/Control-Avionics-RP2350
Control Avionics RP2350 [CARP] is a compact system designed specifically for operating small scale sounding rockets.
158 parts2 - 4 layers55 × 154.1 mm
GPS module
Dizzerin/Rocket-Flight-Data-Computer
This project uses an STM32H743VGT6 MCU along with some innertial measurement units (IMU)s and barometric pressure sensors to and an SD card to record flight data from a model rocket and for later analysis, graphing, and…
161 parts1 - 4 layers85 × 55 mm
Servo Test Board v4
DoggeBoi/Servo_PCBs
Collection of proof of consept and "production" PCBs
115 parts1MIT - 4 layers79 × 60 mm
- 2 layers64.9 × 33 mm
Jazzhands main
wearpants/jazzhands-hardware
A small multi-PCB handheld keyboard for chording style input.
44 parts1
Questions
How big is the Haptic knob PCB?
It measures 23.8 × 36.3 mm and has 4 copper layers, 1.61 mm thick.
What parts does the Haptic knob use?
70 parts, built around the ESP32-S3-WROOM-1U-N4, CH224K, MT2492 and PDRV8311HRRWR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Haptic knob KiCad files?
From the wirano/haptic-knob repository on GitHub, at the commit this page was made from: the board is Hardware/knob_motherboard/haptic-knob.kicad_pcb and its schematic Hardware/knob_LCD/knob_LCD.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Haptic knob design in my own project?
Its repository states no licence, so its author keeps all rights: ask wirano before reusing the design.